WMS:TR-20 Reservoir Data: Difference between revisions
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
You can define reservoir data by pressing the '''Define reservoir data''' button. This will bring up a dialog where you can define the elevation-discharge-storage relationship for the reservoir. You can enter up to 20 elevation-discharge-storage relationships for each reservoir. To assign a particular set of data to a reservoir, select the reservoir you want and select the '''OK''' button on the ''TR20 Reservoir data'' dialog. | You can define reservoir data by pressing the '''Define reservoir data''' button. This will bring up a dialog where you can define the elevation-discharge-storage relationship for the reservoir. You can enter up to 20 elevation-discharge-storage relationships for each reservoir. To assign a particular set of data to a reservoir, select the reservoir you want and select the '''OK''' button on the ''TR20 Reservoir data'' dialog. | ||
===Reservoir Name=== | |||
The reservoir name is used to associate resulting hydrographs with the appropriate reservoir when reading a hydrograph file after a TR20 run. The name should be unique and no longer than eight characters. | |||
Revision as of 18:38, 25 February 2013
TR20 allows you to route a hydrograph through a reservoir using the RESVOR TR20 file card. You can define these reservoir routing parameters in the TR20 Reservoir Routing dialog. Reservoirs and other types of structures (such as detention basins) can be defined from the TR20 Reservoir Data dialog.
You can define reservoir data by pressing the Define reservoir data button. This will bring up a dialog where you can define the elevation-discharge-storage relationship for the reservoir. You can enter up to 20 elevation-discharge-storage relationships for each reservoir. To assign a particular set of data to a reservoir, select the reservoir you want and select the OK button on the TR20 Reservoir data dialog.
Reservoir Name
The reservoir name is used to associate resulting hydrographs with the appropriate reservoir when reading a hydrograph file after a TR20 run. The name should be unique and no longer than eight characters.
Related Topics
- TR20 Overview
- Editing TR20 Parameters
- Name
- Input Hydrograph
- Defining Routing
- Start Routing Elevation
WMS – Watershed Modeling System | ||
---|---|---|
Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter | |
Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
Aquaveo |