WMS:TR-55

TR-55 models can be defined in WMS using the commands in the TR-55 menu and resulting dialogs. The TR-55 model has long been used to determine the increase in runoff resulting from the development of rural land into urban land. The WMS interface to TR-55, combined with the basin delineation and time of concentration calculations from feature objects (see Lag Time and Time of Concentration), makes it simple to set up and run several different scenarios in a relatively short time period.

This section describes the mechanics of the WMS interface to TR-55 and is not a complete reference to the methodology, uses, and limitations. For more in depth information you should read “Technical Release 55: Urban Hydrology for Small Watersheds, 2nd Edition.”

WMS uses its own format for saving or reading a TR-55 simulation. When you are in the Hydrologic Modeling Module, select TR-55 from the drop-down list of models to make TR-55 your active model. To edit the TR-55 parameters and run a TR-55 simulation, select the outlets or basins you wish to edit and/or run and select the Run Simulation menu item from the TR-55 menu.

Related Topics

• Basin Data
• Outlet Data
• Hydrographs