WMS:Linking Models: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Image:image144.jpg|thumb|300 px]] | [[Image:image144.jpg|thumb|300 px]] | ||
The final step before running a stochastic simulation is to link any required models. In particular | The final step before running a stochastic simulation is to link any required models. In particular, link how the hydrologic modeling results are used as boundary conditions for the HEC-RAS hydraulic model. When selecting the ''Run Stochastic Model'' option, the ''Model Steering Dialog'' appears. For the hydrologic model you are using (HEC-1) you must assign the appropriate hydrograph (basin or outlet) to the river reach and section in the hydraulic model. | ||
The option to ''Assign Hydrographs Automatically'' can be used providing a drainage coverage and centerline coverage are being used to set up the hydrologic and hydraulic models. | The option to ''Assign Hydrographs Automatically'' can be used providing a drainage coverage and centerline coverage are being used to set up the hydrologic and hydraulic models. | ||
| Line 6: | Line 6: | ||
After identifying the hydrograph and the river, reach, and cross section station select the '''Assign Hydrograph BC''' button to link the models for this point. Continue until all of the appropriate model locations are linked. | After identifying the hydrograph and the river, reach, and cross section station select the '''Assign Hydrograph BC''' button to link the models for this point. Continue until all of the appropriate model locations are linked. | ||
When selecting '''OK''' | When selecting '''OK''' the model simulation will run. | ||
Revision as of 22:25, 1 December 2014
The final step before running a stochastic simulation is to link any required models. In particular, link how the hydrologic modeling results are used as boundary conditions for the HEC-RAS hydraulic model. When selecting the Run Stochastic Model option, the Model Steering Dialog appears. For the hydrologic model you are using (HEC-1) you must assign the appropriate hydrograph (basin or outlet) to the river reach and section in the hydraulic model.
The option to Assign Hydrographs Automatically can be used providing a drainage coverage and centerline coverage are being used to set up the hydrologic and hydraulic models.
After identifying the hydrograph and the river, reach, and cross section station select the Assign Hydrograph BC button to link the models for this point. Continue until all of the appropriate model locations are linked.
When selecting OK the model simulation will run.
Previous Step in Stochastic Modeling
Next Step in Stochastic Modeling
Related Topics
WMS – Watershed Modeling System | ||
|---|---|---|
| Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter |  |
| Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
| Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
| Aquaveo | ||
