SMS:Model Specific Coverages

Specific model coverage can be selected by right-clicking on the map module data in the Project Explorer and selecting Type | Models followed by selecting the model coverage; or by right-clicking on the "Map Data" and selecting New Coverage followed by using the New Coverage dialog.

• 1D Hyd Centerline Coverage – Used to identify the centerline in the hydraulic model.
• 1D Hyd Cross Section Coverage – Used to identify the cross section stations in the hydraulic model.
• ADCIRC – Used to build a conceptual model of an ADCIRC project.
• ADH – has two coverage options.

• ADH – Used to build a conceptual model of an ADH project.
• Vessel – Used to add vessels to the simulation and give them paths to follow.

• BOUSS2D – Used to build feature objects and parameters for a BOUSS-2D model simulation.
• BOUSS Runup/Overtopping – Uses multiple coverages to create the Runup/Overtopping model simulation. The coverages are:

• Probes – Used to create feature objects for probes.
• Damping – Used to create arcs with damping attributes.
• Porosity – Used to create arcs with porosity attributes.
• Roughness – Uses polygons to define the varying roughness.
• Transects – Used to create arcs to represent the 1-d grid used for a run-up simulation.
• Wavemaker – Used to create arcs that define wave parameters.

• CGWAVE – Used to build a conceptual model of a CGWAVE project.
• CMS-Flow – Utilize two different coverage types.

• Boundary Conditions – Used to create the computational domain (or grid).
• Save Points – Used to define special output locations from the computation.

• CMS-Wave – Used to build a conceptual model of a CMS-Wave project.
• CSHORE – Used to build a conceptual model of a CSHORE project.
• EFDC – Used to create curvilinear grids for use with the EFDC model (EFDC grid format).
• ESMF – Used to couple ADCIRC and STWAVE models.
• FESWMS – Used to build a conceptual model of a FESWMS project.
• GenCade – Used to build a conceptual model of a GenCade project.
• Generic Mesh Coverage
• Generic Cartesian Grid Coverage
• PTM – Allows simulating particle transport processes.
• SED-ZLJ – Sediment model used with the EFDC coverage.
• SRH-2D – Uses multiple coverages to create the SRH-2D model simulation. The coverages are:

• Boundary Conditions – Used to create boundary conditions for hydraulic computation.
• Obstructions – Used to create feature objects that represent obstructions, such as bank protrusions and boulder clusters.
• Monitor Points – Used to gather specific information for that location at all time steps.
• Materials – Allows creating material zones specific to the SRH-2D model.

• STWAVE – Used to build a conceptual model of a STWAVE project.
• TABS (RMA2/RMA4) – Used to build a conceptual model for a RMA2 or RMA4 project.
• TUFLOW Coverages – Used to create feature objects for a TUFLOW simulation. Includes several coverages.

• 1D Cross Sections – Used to define open channel cross section data for 1D networks.
• 1D Networks – Used to create channels and nodes for a 1D domain.
• 1D Water Level Lines – Define the locations where 1D solutions will be written as 2D output.
• 1D Water Level Points – Used in conjunction with water level lines to guide TUFLOW on creating 2D output for 1D networks.
• 1D/2D BCs and Links – Used to specify cell code (active/inactive) areas of the 2D model domain.
• 1D/2D Connections – Used with the 2D BC coverage to link 2D and 1D domains.
• 2D Flow Constriction Shapes – Used to define flow constrictions in TUFLOW.
• 2D Flow Constriction (cell based)
• 2D Grid Extents – Used to create TUFLOW grids.
• 2D Materials – Used to assign material data for use in the TUFLOW simulation.
• 2D Miscellaneous (FLC, WRF, IWL, SRF, and AD)
• 2D Z Lines (advanced) – Modifies geometry through time to simulate levee failures or other changes to elevation data within the model run.
• 2D Z Lines/Polygons (simple) – Used as geometry modifications and force grid elevation values using arcs or polygons.
• 2D/2D Linkages – Used to setup TUFLOW to use multiple 2D domains.

• WAM – Used to build a conceptual model of a WAM project.
• Wind – Represents a storm as an arc or series of arcs that follow the storm track and define the storm attributes at the nodes along the arc.

• Holland/PBL – used to create a storm track for a PBL project for use in ADCIRC.
• Synthetic Storm – provides a mechanism for creating a PBL coverage based upon user specified parameters.

Related Topics

• Map Module
• Generic Coverages