WMS:Time Computation Arcs: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The '''Node | The '''Node → Flow arcs''' command in the '''Feature Objects''' menu allows you to automatically develop time computation arcs by tracing the flow path across a TIN or DEM and saving an arc representing the path so that an equation can be assigned to it. You can investigate where the arc(s) will be created using the flow path tool and selecting points on the TIN or DEM since the same functions for flow are used to create the arcs. The process requires the following three steps: | ||
1. Create a feature points at locations where the flow path segments should begin. | 1. Create a feature points at locations where the flow path segments should begin. | ||
| Line 5: | Line 5: | ||
2. Make sure any feature points you wish to use to create time computation arcs are selected. | 2. Make sure any feature points you wish to use to create time computation arcs are selected. | ||
3. Choose the '''Node | 3. Choose the '''Node→Flow arcs''' command. | ||
You will be asked if you want to create one continuous arc or multiple arcs. If you respond with one continuous arc it will create an arc representing the flow path from the selected feature point to the next downstream outlet. If you choose to create multiple arcs it will break the arc into separate arcs if the flow path encounters a stream. | You will be asked if you want to create one continuous arc or multiple arcs. If you respond with one continuous arc it will create an arc representing the flow path from the selected feature point to the next downstream outlet. If you choose to create multiple arcs it will break the arc into separate arcs if the flow path encounters a stream. | ||
Revision as of 22:23, 23 January 2013
The Node → Flow arcs command in the Feature Objects menu allows you to automatically develop time computation arcs by tracing the flow path across a TIN or DEM and saving an arc representing the path so that an equation can be assigned to it. You can investigate where the arc(s) will be created using the flow path tool and selecting points on the TIN or DEM since the same functions for flow are used to create the arcs. The process requires the following three steps:
1. Create a feature points at locations where the flow path segments should begin.
2. Make sure any feature points you wish to use to create time computation arcs are selected.
3. Choose the Node→Flow arcs command.
You will be asked if you want to create one continuous arc or multiple arcs. If you respond with one continuous arc it will create an arc representing the flow path from the selected feature point to the next downstream outlet. If you choose to create multiple arcs it will break the arc into separate arcs if the flow path encounters a stream.
Related Topics
WMS – Watershed Modeling System | ||
|---|---|---|
| Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter |  |
| Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
| Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
| Aquaveo | ||
