WMS:HSPF HYDR: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
To access the HYDR Parameters dialog box, press the '''HYDR''' button in the Reach/Reservoir Activity dialog box. The HYDR Parameters dialog box lets the user enter the parameters for the following HYDR input tables: HYDR-PARM1, HYDR-PARM2, and HYDR-INIT. The following monthly value tables may also be input from this dialog if required: MON-CONVF. Other tables used to set up “categories” to be simulated are not supported in WMS. Some parameters require a single value for the entire simulation and others are allowed to vary monthly, depending on the flags set in the HYDR-PARM1 table. For information on the definition and function of specific variables in this module, see Section 4.4(3).2 | To access the HYDR Parameters dialog box, press the '''HYDR''' button in the ''Reach/Reservoir Activity'' dialog box. The ''HYDR Parameters'' dialog box lets the user enter the parameters for the following HYDR input tables: HYDR-PARM1, HYDR-PARM2, and HYDR-INIT. The following monthly value tables may also be input from this dialog if required: MON-CONVF. Other tables used to set up “categories” to be simulated are not supported in WMS. Some parameters require a single value for the entire simulation and others are allowed to vary monthly, depending on the flags set in the HYDR-PARM1 table. For information on the definition and function of specific variables in this module, see Section 4.4(3).2 – HYDR Input of the HSPF Manual.[http://water.usgs.gov/software/HSPF/] | ||
In addition to the fields and buttons to edit HYDR input variables, a few other buttons exist in this dialog. The Print Info button leads to a dialog where the PRINT-INFO block for RCHRES segments may be set up (see Section 4.4(3).1.2 of the HSPF Manual. The Define FTABLE button leads to a dialog where the FTABLE for the selected reach/reservoir may be input (see Section 4.5 | In addition to the fields and buttons to edit HYDR input variables, a few other buttons exist in this dialog. The '''Print Info''' button leads to a dialog where the PRINT-INFO block for RCHRES segments may be set up (see Section 4.4(3).1.2 of the HSPF Manual[http://water.usgs.gov/software/HSPF/]). The '''Define FTABLE''' button leads to a dialog where the FTABLE for the selected reach/reservoir may be input (see Section 4.5 – FTABLES Input of the HSPF Manual). This functionality will also be discussed later. | ||
Revision as of 20:18, 18 February 2013
To access the HYDR Parameters dialog box, press the HYDR button in the Reach/Reservoir Activity dialog box. The HYDR Parameters dialog box lets the user enter the parameters for the following HYDR input tables: HYDR-PARM1, HYDR-PARM2, and HYDR-INIT. The following monthly value tables may also be input from this dialog if required: MON-CONVF. Other tables used to set up “categories” to be simulated are not supported in WMS. Some parameters require a single value for the entire simulation and others are allowed to vary monthly, depending on the flags set in the HYDR-PARM1 table. For information on the definition and function of specific variables in this module, see Section 4.4(3).2 – HYDR Input of the HSPF Manual.[1]
In addition to the fields and buttons to edit HYDR input variables, a few other buttons exist in this dialog. The Print Info button leads to a dialog where the PRINT-INFO block for RCHRES segments may be set up (see Section 4.4(3).1.2 of the HSPF Manual[2]). The Define FTABLE button leads to a dialog where the FTABLE for the selected reach/reservoir may be input (see Section 4.5 – FTABLES Input of the HSPF Manual). This functionality will also be discussed later.
Related Topics
WMS – Watershed Modeling System | ||
|---|---|---|
| Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter |  |
| Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
| Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
| Aquaveo | ||
