WMS:NSS Computing Peak Discharges

File:Image125.jpg

National Flood Frequency Regression Method dialog

Setting up the analysis consists of the following steps, all done within the single dialog shown below:

1. Delineate your watershed and compute your basin area and other geometric parameters. You can enter the value manually if you have not delineated from a DEM, drainage coverage, or TIN.
2. Select the state your watershed is in and assign the Maximum Flood Region.
3. Select the region equation that the watershed is in and while highlighted from the Available Equations window choose the Select button so that it will be listed in the Selected Equations window. If the watershed overlaps more than one region then select the other regions as well.
4. Variable values derived from a DEM or Drainage coverage will automatically be placed in the appropriate edit fields. Other variables not computed will need to be defined.
5. Select the Compute Results button to estimate the peak flows for the 2, 5, 10, 25, 50, 100 and 500-year recurrence intervals.

A hydrograph can be estimated by selecting one of the peak flow rows from the Results table and choosing the Compute Hydrograph button.

Related Topics

• Overview of NSS
• Saving/Restoring a Simulation
• Hydrographs
• GIS Overlay