GMS:TIN Commands

Menu Command	Description
New TIN...	Creates a new TIN and opens the TIN Properties dialog.
Lock All Vertices	Since it is possible to accidentally drag points, vertices can be "locked" to prevent them from being dragged or edited by toggling on this command.
TIN Settings...	Opens the Preferences dialog to the settings affecting TINs.
-	-
Triangulate	Creates triangles from existing vertices on the active TIN using the Delauney criteria. If triangles already exist, they will be deleted.
Subdivide TIN...	Opens the Subdivision Factor dialog letting the user enter a factor by which existing triangles will be split into smaller triangles.
-	-
TIN -> 2D Scatter Points	Creates a new 2D Scatter Point set from the vertices of the active TIN. The scatter points could then be used for interpolation.
TIN -> 2D Mesh	Creates a new 2D mesh from the active TIN, preserving the triangles.
Fill Between TINs -> 3D Mesh	Creates a 3D mesh, or adds onto an existing 3D mesh, by filling in the space between two TINs. A 2D mesh must exist and is used as a projection mesh for the 3D elements. Two TINs must be selected.
-	-
Horizons -> Solids...	Opens the Horizons to Solids wizard which can be used to create solids from a combination of boreholes, TINs and conceptual models.
Horizons -> 3D Mesh...	Opens the Horizons to Mesh wizard which can be used to create a 3D mesh from a combination of boreholes, TINs and conceptual models.
Advanced >
TIN Boundary -> Polygon	Creates a new coverage containing a polygon derived from the outer boundary of the TIN.
TIN Thiessen -> Polygons	Creates a new coverage containing polygons derived from the thiessen polygons of the TIN.
TIN Contours -> Arcs	Creates a new coverage containing feature arcs derived from the linear contours displayed on the TIN.
Vertex Strings -> Arcs	Creates a new coverage containing a feature arc derived from the vertex string on the TIN (if one exists).
TIN -> Extruded Solid	Opens the Extrude/Offset Tin -> Solid dialog which is used to extrude the TIN vertically up or down to form a solid.
Fill Between TINs -> Solid	Creates a solid by extruding one or more TINs to a base elevation and then performing a set operation to remove the solid portions outside the TINs.