WMS:CE-QUAL-W2 Menu

New Simulation

The New Simulation command from the CE-QUAL-W2 menu initializes the CE-QUAL data and calculations. In order to begin a bathymetry file or CE-QUAL-W2 model this must first be selected from the CE-QUAL-W2 option of the Models menu. If New Simulation is selected during a model it will clear all data and begin a new model.

Save Simulation

This function allows the user to create the input files that are used in the CE-QUAL-W2 model. The user should select the the correct folder to save the file to, highlight the filename that is desired and click Save. This function does not allow for multiple files to be saved at once. Refer to the Job Control help file for instructions on editing the input files.

Delete Simulation

This option of the CE-QUAL-W2 menu clears all data for the current simulation.

Read Simulation

The CE-QUAL-W2 Read Simulation command reads a CE-QUAL-W2 bathymetry and control file. To read a CE-QUAL-W2 simulation, you should have defined the simulation using WMS. If you have not defined your simulation using WMS, you should have branch and segment coverages representing the branches and segments defined in the bathymetry file associated with the CE-QUAL-W2 control file.

To read a CE-QUAL-W2 simulation, select and open the control filename from the file browser after selecting this menu item.

Read Solution

A CE-QUAL-W2 solution can be read into WMS by selecting the Read Solution command. When you read the solution, 2D grids representing the layers and segments for each branch polygon are created. These grids are generated in the same way that grids are created when selecting the Map→CE-QUAL-W2 Grids menu command. WMS reads the solution values from the CE-QUAL-W2 snapshot files and the solution contours can be plotted for each time step that was output from the model.

Run CE-QUAL-W2

• Run CE-QUAL-W2

Branches

This feature allows the user to edit the features of a branch. See CE-QUAL-W2 Branches for more information.

Segments

The Segments command in the CE-QUAL-W2 menu allows the user to edit the parameters of a segment. The dialog below appears with a list of all created segments for the current model.

To edit a segment, the desired segment should be highlighted and then the segment parameters can simply be edited.

All attributes of the segment are shown. If the lengths of the branch or segment have not been obtained, the Length of segment and Segment orientation text boxes will be blank. The measure tool to the right of the Length of segment text box can be used to obtain the length of a particular segment. This tool also calculates the orientation. The Branch polygon text box shows which branch the segment is assigned to. This can be changed using the dropdown box option.

The Branch polygon attributes button brings up the Polygon Branch Attributes dialog. Refer to the Branches help file for more information on the features of this dialog.

The Segment vertical profile button allows the user to view and edit the layers of the segment. (Refer to the Layers help file for information on creating layers)

Tributaries can be added to a segment by selecting the Segment tributaries button. A dialog is opened and the user can enter or import the data necessary to add a tributary to the simulation.

Map Segments and Branches

The Map Segments⇔Branches command in the CE-QUAL-W2 menu assigns all created segments to the branch in which the segment polygon lies. The user should refer to the segment tab of a branch polygon editor to see the segments that are assigned to a branch.

Related Topics

• CE-QUAL-W2
• CE-QUAL-W2 Branches