SMS:FESWMS Menu

The following menu commands are available in the FESWMS Menu:

• Assign BC (Boundary Condition) – opens either the FESWMS Nodestring Boundary Conditions dialog or the FESWMS Nodal Boundary Conditions dialog. A node or nodestring must be selected for this command to be available.
• Local Parameters – brings up the FESWMS Local Parameters dialog. Requires that a node be selected.
• Initial Conditions – brings up the Initial Conditions Data dialog.
• Weir – opens the FESWMS Weir dialog. Requires a selected nodestring be active.
• Culvert – brings up the FESWMS Culvert dialog. Requires that the inlet and outlet nodes are currently selected.
• Drop Inlet – brings up the Drop Inlet Definition dialog. Requires that a node is currently selected.
• Channel Link – brings ups the FESWMS Channel Link dialog.
• Gate – opens the FESWMS Gate dialog.
• Pier – brings ups the FESWMS Pier Definition dialog.
• FLUX String – option to set currently selected nodestring to Total Flow string.
• Material Properties – opens the FESWMS Material Properties dialog. This dialog is different than the general Material Properties dialog in SMS.
• Model Check – runs the model check. If there are errors, then the Model Check dialog will appear.
• Model Control – brings up the FESWMS Model Control dialog.
• Run FST2DH

Local Parameters Dialog

FESWMS Local Parameters dialog

Initial Conditions Dialog

Initial Conditions Data dialog

Related Topics

• FESWMS