GMS:Stochastic Modeling

From XMS Wiki
Jump to navigationJump to search
Calibration,
Parameters,
Stochastic Modeling
Calibration
Model Calibration
Automated Parameter Estimation
PEST Dialog
PEST
Run Options
Observations
MODFLOW-USG Observations
Plot Wizard
Calibration Targets
Parameters
Parameters
Parameter Dialog
Pilot Points
Multiplier Arrays for Parameters
Standard MODFLOW Parameters
Stochastic Modeling
Stochastic Modeling
Gaussian Field Generator
Risk Analysis Wizard
T-PROGS

There are two methods in GMS for stochastic modeling using MODFLOW 2000. The first, parameter zonation, uses either a Random Sampling, Latin Hypercube Sampling, or Gaussian Fields to generate the different realizations. The second approach uses indicator simulations generated by T-PROGS.

After the stochastic simulation results are generated, you can view these results using the Project Explorer. You can also refine the results by using the Risk Analysis Wizard or Statistical Analysis of Stochastic solutions.

Stochastic Applications

One approach for dealing with model heterogeneity is stochastic simulations based on multiple equally plausible candidate realizations of the site heterogeneity. Ideally, such an approach would enable the generation of variability in subsurface soil stratigraphy based on interpretable geologic parameters such as lens width, material proportions, juxta-positioning tendencies and anisotropy. Multiple realizations that are conditioned to borehole data provide modelers with a rational approach for dealing with uncertainty associated with site characterization. Stochastic simulations can be applied to regional representations of the aquifer behavior in addition to local scale simulations. Stochastic simulations are particularly well-suited to local scale models since the resulting complex heterogeneity is more representative of actual stratigraphic deposition. This heterogeneity makes realistic and potentially more accurate contaminant transport simulation possible by simulating the preferential flow channels resulting from thin lenses of clays, sands, or other materials. The ultimate result of a stochastic approach is multiple simulations of hydraulic parameters that create a probabilistic solution. Such a solution has more credence and provides a better understanding of actual site conditions.

The ultimate application of T-PROGS is to generate stochastic simulations of soil heterogeneity. These realizations can then be incorporated into MODFLOW simulations as material sets in the LPF package or as HUF data in the HUF package. (See T-PROGS)

Stochastic Inverse Modeling

Stochastic inverse modeling is a MODFLOW run option that takes each run in a stochastic simulation and performs parameter estimation on the run to find the optimal values based on observation data. This option is very time consuming compared with a regular stochastic simulation and a parameter estimation run because you are doing parameter estimation for each stochastic run times.

Stochastic inverse modeling can be performed only when using material sets or HUF arrays as chosen in the Stochastic Options dialog. PEST is the parameter estimation code supported by GMS.

The following occurs during the stochastic inverse process:

  1. Run MODFLOW for the stochastic simulation iteration.
  2. Set the starting head equal to the resulting heads from the MODFLOW run.
  3. Run parameter estimation.
  4. Run final MODFLOW (if needed for PEST).
  5. Move to next stochastic simulation iteration.

The starting heads are interpolated to decrease the run times during the inverse portion.

Stochastic Options Dialog

You use the stochastic options dialog to select the type of stochastic simulation its major options.

Parameter Randomization

This option uses parameters defined in Parameters Dialog.

Material Sets

This option becomes available when there is at least one material set simulation in memory. One method for creating material sets is to use T-PROGS. When this stochastic option is chosen, MODFLOW will be run once for each material set. This option also requires that the LPF package and the material IDs option be chosen.

HUF Sets

This option becomes available when there is at least one HUF set simulation in memory. One method for creating HUF sets is to use T-PROGS. When this stochastic option is chosen, MODFLOW will be run once for each HUF set. This option also requires that the HUF package be chosen.

Only Save Solutions

With this option selected, during each stochastic iteration, changes are made to MODFLOW simulation and only a few files are saved. If this option is not selected, each stochastic iteration results in a new entire set of MODFLOW files being saved.

Using this option requires less disk space, but doesn't allow you to load and rerun individual stochastic iteration simulations.

Using Parameter Zonation With Stochastic Modeling

To create a stochastic MODFLOW simulation using parameter zonation, you follow these steps:

  • First define your zones using key values.
  • Select the Stochastic Simulation option from the Global Options dialog.
  • Select the Parameter Randomization option from the Stochastic Options dialog.
  • Choose whether you want to use the Random Sampling or Latin Hypercube randomization approaches in the parameters dialog.
  • Save and Run your model.

Random Sampling

Random Sampling is the most widely used approach for generating multiple random model simulations. GMS supports both normal and uniform distributions.

A normal distribution can be defined as:

where σ is the standard deviation, μ is the mean, and x is the value being sampled. A uniform distribution can be defined as:

where α and β are the bounds of the parameter value x.

To set up the Random Sampling, you need to specify the mean, standard deviation, and upper and lower bounds for each parameter. Finally, you choose how many realizations you want to generate.

Latin Hypercube

The Latin Hypercube randomization approach is a method that tries to efficiently probe the probability space for each parameter in a simulation in such a way that there is at least one simulation that represents every probability area for each parameter.

First, we specify the number of segments for each parameter. The total probability, defined by a distribution, mean, standard devation, and upper and lower bounds, is divided up into parts with equal probability (area). GMS then generates a random parameter value so that there is one value that lies within each probability segment.

Freq.gif

This is repeated in a combinatorial fashion for each parameter so that there are

File:Combination.gif

number of simulations, where n is the number of parameters and P is the number of segments for the ith parameter. For example, if there were three parameter with four, four and five segments, the number of model runs would be as follows:

File:Comb example.gif

Using the Latin Hypercube method has the benefit of needing a fewer number of runs to achieve the same level of confidence than the number required for the Monte Carlo approach because we have guaranteed that the entire probability range will be explored.

Using Indicator Simulations With Stochastic Modeling

GMS allows you to create a stochastic simulation using output from T-PROGS. This can be in the form of either material sets or HUF data. Use the following steps:

  • Generate Material Sets or HUF data using T-PROGS.
  • Enter the Stochastic... dialog from the MODFLOW menu.
  • Select the Material Sets option and choose the appropriate material set or HUF data simulation.
  • Save and Run MODFLOW.
  • GMS will generate as many MODFLOW runs as there are material sets.

Statistical Analysis of Stochastic MODFLOW/MT3D solutions

A statistical analysis can be computed on a Stochastic MODFLOW or MT3D solution by right-clicking on a stochastic folder in the Project Explorer and selecting the Statistical Analysis command. This command creates four data sets for the mean, min, max, and standard deviation. The 3D grid display options can then be used to visualize these data sets.