SMS:ADH Material Properties: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 52: Line 52:
=== Miscellaneous (Outside of any group) ===
=== Miscellaneous (Outside of any group) ===


''General Material Properties...'' button opens the [[SMS:Materials Data|Materials Data]] window. Any changes made to global materials will be reflected in the materials list box.
'''General Material Properties...''' button opens the [[SMS:Materials Data|''Materials Data'']] window. Any changes made to global materials will be reflected in the materials list box.





Revision as of 15:40, 27 March 2013

To open this window, select the ADH | Material Properties... menu item.

Dialog Description

Materials (Untitled group box)

Name text displays the name of the currently selected material in the material list.

ID text displays the numeric ID of the currently selected material in the material list.

List box contains the existing globally defined materials.

ADH Material Properties (Tab control)

This tab control contains the following three tabs:

Properties

Manning's roughness real number edit field limited to a value of 0.0 to 0.1. This correlates to a FR MNG card applied to a material.

Kinematic eddy viscosity / Estimated eddy viscosity radio group specifies which method to use and correlates to the MP EVS and MP EEV cards, respectively. The Kinematic eddy viscosity control group includes the eddy viscosity tensor edit fields of EVxx, EVyy, and EVxy. The EVxy is specified once, and copied to the second term. All edit fields allow positive real number input. The Estimated eddy viscosity includes the Weighting factor real number field. This factor is used with other model conditions to calculate the eddy viscosity during the simulation.

Include coriolis force check box and the associated Latitude edit field will include the MP COR when checked. The edit field allows real number input between -90.0 and 90.0.

Exclude from computations (remove from domain) check box correlates to a OFF card applied to a material.

Meshing and Boundary Conditions

Mesh Refinement

Maximum number of refinement levels positive integer edit field correlates to the MP ML card.

Error tolerance for refinement positive real number edit field correlates to the MP SRT card.

Boundary Condition Assignment

Apply rain or evaporation check box with the associated Flow (per unit area) curve button, Series time units combo box, and Specify curve fir tolerance check box and positive integer edit field defines the rain/evaporation series. Clicking on the curve button will open the XY Series Editor. This control group correlates to the NB OVL boundary condition card with a XY1 series definition card.

Transport Constituents

List box contains the existing transport constituents.

Molecular diffusion rate edit field displays the parameter value for the currently selected transport constituent. This data pertains to the MP DF card.

Error tolerance for refinement edit field displays the parameter value for the currently selected transport constituent. This data pertains to the MP TRT card.

Miscellaneous (Outside of any group)

General Material Properties... button opens the Materials Data window. Any changes made to global materials will be reflected in the materials list box.


Go to SMS:ADH page