SMS:TUFLOW Project Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(Created page with "To build a SRH-2D model in SMS, use the following steps: {| class="wikitable collapsible collapsed" |- !width="800" style="text-align:left;"|1. SMS project setu...")
 
No edit summary
Line 1: Line 1:
To build a [[SMS:SRH-2D|SRH-2D]] model in SMS, use the following steps:
To build a [[SMS:TUFLOW|TUFLOW]] model in SMS, use the following steps:
{| class="wikitable collapsible collapsed"
{| class="wikitable collapsible collapsed"
|-
|-

Revision as of 18:01, 2 July 2015

To build a TUFLOW model in SMS, use the following steps:

3. Review and edit elevation data.
  1. Review and set object Projections.
  2. Remove erroneous points.
  3. Add breaklines.
  4. Merge datasets.
  5. Stamp new features (channel, roadway embankment, or other).
4. Define model limits (domain).
  1. Generate a Mesh Generator map coverage.
  2. Digitize arcs to define mesh limits.
  3. Define mesh density and type (in Mesh Generator coverage).
  4. Create arcs along key breaklines and notable features (banklines, structures, piers, road embankments, etc.).
  5. Set vertex spacing on arcs to define mesh element size.
  6. Specify mesh type for each polygon (pave / patch / none).
  7. Assign scatter data.
  8. Generate mesh.
5. Define materials.
  1. Create a SRH-2D Materials coverage.
  2. Digitize material areas (polygons).
  3. Define material types and Manning’s roughness values.
  4. Defining materials from land use GIS data.
6. Set-up boundary conditions.
  1. Create a SRH-2D Boundary Conditions coverage.
  2. Assign boundary conditions to arcs.
    • Inlet Q (options).
    • Exit-H (options, including new normal/critical depth tool).
    • Internal inflows and outflows (highlight approach – hole in mesh).
    • Monitoring Lines.
    • Optional Wall boundary conditions.
    • Structures (culverts, weirs, bridge pressure flow).
7. Set monitoring points.
  1. Create a SRH-2D Monitoring Points coverage.
  2. Create feature points in the coverage.
8. Define obstructions.
  1. Create a SRH-2D Obstructions coverage.
  2. Add arcs to coverage.
  3. Assign obstruction parameters to arcs.
9. SRH-2D simulation setup.
  1. Create new simulation.
  2. Add components to simulation.
  3. Set up Model Control parameters.
  4. Check the model.
  5. Simulation execution.
  6. Troubleshooting.
10. Review results.
  1. Open _XMDF file.
  2. Results layers.
  3. Observation lines.
  4. Summary table.
  5. Run the Plot Wizard.
  6. Data calculator.
11. Compare datasets.
12. Data visualization.