SMS:TUFLOW Project Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 53: Line 53:
|width="800"|
|width="800"|
:TUFLOW requires both general material data properters and TUFLOW specific materials.
:TUFLOW requires both general material data properters and TUFLOW specific materials.
:# Open the Materials Data dialog.
:# Open the ''Materials Data'' dialog.
:# Add materials.  
:# Add materials.  
|}
|}

Revision as of 16:58, 6 July 2015

In general, to build a TUFLOW model in SMS, use the following steps:

3. Review and edit elevation data.
  1. Review and set object Projections.
  2. Remove erroneous points.
  3. Add breaklines.
  4. Merge datasets.
  5. Stamp new features (channel, roadway embankment, or other).
4. Define model limits (domain).
  1. Generate a Mesh Generator map coverage.
  2. Digitize arcs to define mesh limits.
  3. Define mesh density and type (in Mesh Generator coverage).
  4. Create arcs along key breaklines and notable features (banklines, structures, piers, road embankments, etc.).
  5. Set vertex spacing on arcs to define mesh element size.
  6. Specify mesh type for each polygon (pave / patch / none).
  7. Assign scatter data.
  8. Generate mesh.
5. Set-up boundary conditions.
  1. Create a TUFLOW 1D/2D BCs and Links coverage.
  2. Assign boundary conditions to arcs.
6. Define general material properties.
TUFLOW requires both general material data properters and TUFLOW specific materials.
  1. Open the Materials Data dialog.
  2. Add materials.
7. TUFLOW simulation setup.
  1. Create new simulation.
  2. Add components to simulation.
8. Define TUFLOW material sets.
  1. Create new material set.
  2. Add define material properties.
8. Define TUFLOW model properties.
  1. Bring up the TUFLOW Model Control dialog and define parameters as needed for:
    1. Time including time steps, start and end times.
    2. Output including map outputs, dataset outputs, and log outputs.
    3. Wetting and drying settings.
    4. Restart files options.
    5. Initial water levels.
    6. Eddy viscosity formulation.
    7. Boundary condition events.
    8. Constituent properties.
    9. Material set management.
    10. Miscellaneous options.
    11. 1D general controls.
    12. 1D network controls.
    13. 1D automatic manholes.
  2. Add define material properties.
9. Run TUFLOW.
  1. Check model simlation.
  2. Run TUFLOW.
10. Review results.
  1. Open _XMDF file.
  2. Results layers.
  3. Observation lines.
  4. Summary table.
  5. Run the Plot Wizard.
  6. Data calculator.
11. Compare datasets.
12. Data visualization.