WMS:HEC-1 Job Control: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 1: Line 1:
The ''Job Control'' dialog is used to define general information about the HEC-1 model. Selecting the '''Job Control''' command from the HEC-1 or OC Hydrograph menu accesses this dialog. The ''Job Control'' dialog can also be accessed by toggling on the display of Job Control cards in the [[WMS:HEC-1 Job Control Parameters|Edit HEC-1 Parameters]] dialog and then clicking on a Job Control related card in the text display window.
The ''Job Control'' dialog is used to define general information about the HEC-1 model. Selecting the '''Job Control''' command from the HEC-1 or OC Hydrograph menu accesses this dialog. The ''Job Control'' dialog can also be accessed by toggling on the display of Job Control cards in the ''Edit HEC-1 Parameters'' dialog and then clicking on a Job Control related card in the text display window.


=== Computational Time Interval ===
=== Computational Time Interval ===

Revision as of 18:22, 5 February 2013

The Job Control dialog is used to define general information about the HEC-1 model. Selecting the Job Control command from the HEC-1 or OC Hydrograph menu accesses this dialog. The Job Control dialog can also be accessed by toggling on the display of Job Control cards in the Edit HEC-1 Parameters dialog and then clicking on a Job Control related card in the text display window.

Computational Time Interval

The computational time interval entered here will be used to computed the effective precipitation and unit hydrograph.

Expected Value Analysis

Toggle this checkbox on to do an expected value analysis. Effective precipitation values and losses will be automatically updated for each sub-area if they have already been computed.

HEC-1 Job Control Parameters

The Job Control dialog is used to define general information about the HEC-1 model. Selecting the Job Control command from the HEC-1 menu accesses this dialog. The Job Control dialog can also be accessed by toggling on the display of Job Control cards in the Edit HEC-1 Parameters dialog and then clicking on a Job Control related card in the text display window.


Related Topics