WMS:HSPF SEDTRN

To access the SEDTRN Parameters dialog box, press the SEDTRN button in the Reach/Reservoir Activity dialog box. The SEDTRN Parameters dialog box lets the user enter the parameters for the following SEDTRN input tables: SANDFG, SED-GENPARM, SAND-PM, SILT-CLAY-PM, SSED-INIT, BED-INIT. The SED-HYDPARM table may also be active if the HYDR module is inactive. The combination of required tables will vary, depending on the flags set in the SAND-FG table. The required tables will be listed in the drop-down list to indicate input that must be completed. Simply choose a table from the list and the input fields for that table will appear. For information on the definition and function of specific variables in this module, see Section 4.4(3).6 – SEDTRN Input of the HSPF Manual.

Related Topics

• HSPF Modules