WMS:TR-20 Reservoir Data: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(23 intermediate revisions by 2 users not shown)
Line 1: Line 1:
TR20 allows you to route a hydrograph through a reservoir using the RESVOR TR20 file card. You can define these reservoir routing parameters in the ''TR20 Reservoir Routing'' dialog. Reservoirs and other types of structures (such as detention basins) can be defined from the ''TR20 Reservoir Data'' dialog.
[[File:TR20resevoirrouting.png|thumb|225 px|Example of the ''TR-20 Resevoir Routing'' dialog.]]
TR-20 allows routing a hydrograph through a reservoir using the RESVOR TR20 file card. Define these reservoir routing parameters in the ''TR-20 Reservoir Routing'' dialog. Reservoirs and other types of structures (such as detention basins) can be defined from the ''TR-20 Reservoir Data'' dialog.


You can define reservoir data by pressing the '''Define reservoir data''' button. This will bring up a dialog where you can define the elevation-discharge-storage relationship for the reservoir. You can enter up to 20 elevation-discharge-storage relationships for each reservoir. To assign a particular set of data to a reservoir, select the reservoir you want and select the '''OK''' button on the ''TR20 Reservoir data'' dialog.
Define reservoir data by pressing the '''Define reservoir data''' button. This will bring up a dialog where the elevation-discharge-storage relationship for the reservoir can be defined. Enter up to twenty elevation-discharge-storage relationships for each reservoir. To assign a particular set of data to a reservoir, select the reservoir and select the '''OK''' button on the ''TR-20 Reservoir data'' dialog.


===Reservoir Name===
''Reservoir Name'' – The ''Reservoir Name'' is used to associate resulting hydrographs with the appropriate reservoir when reading a hydrograph file after a TR-20 run. The name should be unique and no longer than eight characters.
The reservoir name is used to associate resulting hydrographs with the appropriate reservoir when reading a hydrograph file after a TR20 run. The name should be unique and no longer than eight characters.
 
''Define Reservoir Routing'' – Routing can be toggled on by selecting this button. After selecting it, reservoir routing will be defined at the selected tree nodes. If this option is not selected, routing will not be defined at the selected tree node.
 
''Define Start Routing Elevation'' – When selected, allows the ability to enter a value for the ''Start Routing Elevation''
 
''Start Routing Elevation'' – The ''Start Routing Elevation'' is the water surface elevation, in feet, that routing begins for the reservoir or structure.
 
'''Define Reservoir Data''' – Select to open ''Define Reservoir Data'' dialog.
 
'''Define Input Hydrograph''' – One or more input hydrographs can be defined for a reservoir. WMS will combine any input hydrographs with other input hydrographs to the reservoir. The resulting hydrograph will then be routed through the reservoir. This option is useful for defining the measured stream flows into a reservoir.
 
'''Reservoir Output Control''' – Select to open ''Reservoir Output Control'' dialog.
[[File:TR20resevoirdata.png|thumb|none|500 px|Example of the ''TR-20 Resevoir Data'' dialog.]]




==Related Topics==
==Related Topics==
* [[WMS:TR-20|TR20 Overview]]
* [[WMS:TR-20|TR-20 Overview]]
* [[WMS:TR-20 Edit Parameters|Editing TR20 Parameters]]
* [[WMS:TR-20 Edit Parameters|Editing TR-20 Parameters]]
* [[WMS:TR-20 Input Hydrograph|Input Hydrograph]]
* [[WMS:TR-20 Routing|Defining Routing]]
* [[WMS:TR-20 Start Routing Elevation|Start Routing Elevation]]




{{WMSMain}}
{{WMSMain}}
{{stub}}
[[Category:TR-20|R]]
[[Category:TR-20 Dialogs|R]]
[[Category:Reservoirs]]

Latest revision as of 20:58, 13 December 2023

Example of the TR-20 Resevoir Routing dialog.

TR-20 allows routing a hydrograph through a reservoir using the RESVOR TR20 file card. Define these reservoir routing parameters in the TR-20 Reservoir Routing dialog. Reservoirs and other types of structures (such as detention basins) can be defined from the TR-20 Reservoir Data dialog.

Define reservoir data by pressing the Define reservoir data button. This will bring up a dialog where the elevation-discharge-storage relationship for the reservoir can be defined. Enter up to twenty elevation-discharge-storage relationships for each reservoir. To assign a particular set of data to a reservoir, select the reservoir and select the OK button on the TR-20 Reservoir data dialog.

Reservoir Name – The Reservoir Name is used to associate resulting hydrographs with the appropriate reservoir when reading a hydrograph file after a TR-20 run. The name should be unique and no longer than eight characters.

Define Reservoir Routing – Routing can be toggled on by selecting this button. After selecting it, reservoir routing will be defined at the selected tree nodes. If this option is not selected, routing will not be defined at the selected tree node.

Define Start Routing Elevation – When selected, allows the ability to enter a value for the Start Routing Elevation

Start Routing Elevation – The Start Routing Elevation is the water surface elevation, in feet, that routing begins for the reservoir or structure.

Define Reservoir Data – Select to open Define Reservoir Data dialog.

Define Input Hydrograph – One or more input hydrographs can be defined for a reservoir. WMS will combine any input hydrographs with other input hydrographs to the reservoir. The resulting hydrograph will then be routed through the reservoir. This option is useful for defining the measured stream flows into a reservoir.

Reservoir Output Control – Select to open Reservoir Output Control dialog.

Example of the TR-20 Resevoir Data dialog.


Related Topics