WMS:TR-20 Reservoir Data: Difference between revisions
No edit summary |
|||
| Line 5: | Line 5: | ||
===Reservoir Name=== | ===Reservoir Name=== | ||
The reservoir name is used to associate resulting hydrographs with the appropriate reservoir when reading a hydrograph file after a TR20 run. The name should be unique and no longer than eight characters. | The reservoir name is used to associate resulting hydrographs with the appropriate reservoir when reading a hydrograph file after a TR20 run. The name should be unique and no longer than eight characters. | ||
===Routing=== | |||
Routing can be toggled on by selecting the '''Define Reservoir Routing''' button. After selecting the '''Define Reservoir Routing''' button, reservoir routing will be defined at the selected tree nodes. If this option is not selected, routing will not be defined at the selected tree node. | |||
===Start Routing Elevation=== | ===Start Routing Elevation=== | ||
| Line 14: | Line 17: | ||
* [[WMS:TR-20 Edit Parameters|Editing TR20 Parameters]] | * [[WMS:TR-20 Edit Parameters|Editing TR20 Parameters]] | ||
* [[WMS:TR-20 Input Hydrograph|Input Hydrograph]] | * [[WMS:TR-20 Input Hydrograph|Input Hydrograph]] | ||
{{WMSMain}} | {{WMSMain}} | ||
Revision as of 21:42, 25 February 2013
TR20 allows you to route a hydrograph through a reservoir using the RESVOR TR20 file card. You can define these reservoir routing parameters in the TR20 Reservoir Routing dialog. Reservoirs and other types of structures (such as detention basins) can be defined from the TR20 Reservoir Data dialog.
You can define reservoir data by pressing the Define reservoir data button. This will bring up a dialog where you can define the elevation-discharge-storage relationship for the reservoir. You can enter up to 20 elevation-discharge-storage relationships for each reservoir. To assign a particular set of data to a reservoir, select the reservoir you want and select the OK button on the TR20 Reservoir data dialog.
Reservoir Name
The reservoir name is used to associate resulting hydrographs with the appropriate reservoir when reading a hydrograph file after a TR20 run. The name should be unique and no longer than eight characters.
Routing
Routing can be toggled on by selecting the Define Reservoir Routing button. After selecting the Define Reservoir Routing button, reservoir routing will be defined at the selected tree nodes. If this option is not selected, routing will not be defined at the selected tree node.
Start Routing Elevation
The start routing elevation is the water surface elevation, in feet, that routing begins for the reservoir or structure.
Related Topics
WMS – Watershed Modeling System | ||
|---|---|---|
| Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter |  |
| Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
| Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
| Aquaveo | ||
