WMS:CE-QUAL-W2 Menu

From XMS Wiki
(Redirected from WMS:CE-QUAL-W2 Segments)
Jump to navigationJump to search


The CE-QUAL-W2 menu has the following commands:

New Simulation

The New Simulation command from the CE-QUAL-W2 menu initializes the CE-QUAL data and calculations. In order to begin a bathymetry file or CE-QUAL-W2 model this must first be selected from the CE-QUAL-W2 option of the Models menu. If New Simulation is selected during a model it will clear all data and begin a new model.

Save Simulation

This function creates the input files that are used in the CE-QUAL-W2 model. Select the the correct folder to save the file to, highlight the filename that is desired and click Save. This function does not allow for multiple files to be saved at once. Refer to the Job Control help file for instructions on editing the input files.

The Save CE-QUAL-W2 Simulation dialog.

Delete Simulation

This option of the CE-QUAL-W2 menu clears all data for the current simulation.

Read Simulation

The CE-QUAL-W2 Read Simulation command reads a CE-QUAL-W2 bathymetry and control file. To read a CE-QUAL-W2 simulation, the simulation should have been defined using WMS. If the simulation was not defined using WMS, define branch and segment coverages representing the branches and segments in the bathymetry file associated with the CE-QUAL-W2 control file.

To read a CE-QUAL-W2 simulation, select and open the control filename from the file browser after selecting this menu item.

Read Solution

A CE-QUAL-W2 solution can be read into WMS by selecting the Read Solution command. When reading the solution, 2D grids representing the layers and segments for each branch polygon are created. These grids are generated in the same way that grids are created when selecting the Map→CE-QUAL-W2 Grids menu command. WMS reads the solution values from the CE-QUAL-W2 snapshot files and the solution contours can be plotted for each time step that was output from the model.

Run CE-QUAL-W2

While the option to run a CE-QUAL-W2 simulation exists in the WMS interface, the WMS developers recommend running CE-QUAL-W2 outside of WMS to better view the progress of the run.

This menu item can be used to run a CE-QUAL-W2 simulation from the WMS model wrapper given the control filename. If the model runs to completion, the results can be read and analyzed in WMS using the Read Solution menu item.

Branches

This feature allows editing the features of a branch. See CE-QUAL-W2 Branches for more information.

Segments

The Segments command in the CE-QUAL-W2 menu allows editing the parameters of a segment. The Polygon Segment Attributes dialog appears with a list of all created segments for the current model.

Example of the Polygon Segment Attributes dialog.

To edit a segment, the desired segment should be highlighted and then the segment parameters can simply be edited.

All attributes of the segment are shown. If the lengths of the branch or segment have not been obtained, the Length of segment and Segment orientation text boxes will be blank. The Measure tool to the right of the Length of segment text box can be used to obtain the length of a particular segment. This tool also calculates the orientation. The Branch polygon text box shows which branch the segment is assigned to. This can be changed using the dropdown box option.

The Branch polygon attributes button brings up the Polygon Branch Attributes dialog. Refer to the Branches help file for more information on the features of this dialog.

The Segment vertical profile button allows viewing and editing the layers of the segment. (Refer to the Layers help file for information on creating layers)

Tributaries can be added to a segment by selecting the Segment tributaries button. A dialog is opened where it is possible to enter or import the data necessary to add a tributary to the simulation.

Map Segments and Branches

The Map Segments⇔Branches command in the CE-QUAL-W2 menu assigns all created segments to the branch in which the segment polygon lies. Refer to the segment tab of a branch polygon editor to see the segments that are assigned to a branch.

Related Topics