WMS:Release Notes WMS: Difference between revisions

Revision as of 20:56, 17 November 2014

Important Note

If you download and install the latest update and your software maintenance has expired, you will not be able to run WMS. Please make sure your WMS maintenance license has not expired before downloading. You can determine your maintenance expiration date by selecting the Help | Register command from WMS. You can renew your maintenance by visiting Aquaveo's web page or by contacting a sales representative. Prices and other information about renewing your license are available on the WMS Pricing Page. The latest update to WMS can be downloaded here.

Intermediate Release 9.1.12 – May 6, 2014

Fixed the WMS 2D grid cell traversal algorithms to handle line segments that begin and end outside the bounds of the 2D grid or the active cells on the 2D grid.
Fixed the HY8 Crossing Discharge Data dialog to get the hydrograph whether it's defined at the outlet or at the basin associated with the outlet.
Fixed WMS so circular stream arcs do not cause WMS to crash when selecting File | New or when shutting down.
Fixed a problem where Mapping Shapefile causes crash
Fixed a Crash when reading in a map file
Fixed a bug with reading tailwater curve ratings of a different length
Fixed some reading issues
Fixed an issue to Update Culvert Info if reading an older file

Intermediate Release 9.1.10 – November 22, 2013

WMS 9.1.10 has been posted on Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/downloads. The following revisions have been made to this version:

26787; Author: cdickson; Date: Thursday, November 21, 2013 9:09:05 AM; Message: Web form option for getting license from the license manager - WMS9.1
26719; Author: csmemoe; Date: Monday, November 18, 2013 2:47:37 PM; Message: Removed failing test assert that isn't necessary. Only needs to test vertical units. (See SVN revision 24750)
26713; Author: csmemoe; Date: Monday, November 18, 2013 12:06:36 PM; Message: Merged revision(s) 26712 from devproj/trunk/Dev: Changed WMS so it reads and saves whether each coverage is visible. ........
26557; Author: csmemoe; Date: Monday, November 11, 2013 9:43:46 AM; Message: Merged revision(s) 26550 from devproj/trunk/Dev/WMS/APP/source/display/mapdraw.cpp: Fixed problems with framing image and getting max/min world coordinates when a rain gage coverage exists. Also cleaned up some of the setmap code to specify const parameters a little better. ........
26542; Author: csmemoe; Date: Friday, November 08, 2013 11:27:03 AM; Message: Merged revision(s) 26541 from devproj/trunk/Dev: Fixed some issues with the TR-55 computation dialog caused by my check-in yesterday--the incorrect cells were getting set to read-only. Also the Fp value was not showing up in the dialog. Cleaned up some code. ........
26535; Author: csmemoe; Date: Thursday, November 07, 2013 5:46:46 PM; Message: Merged revision(s) 26534 from devproj/trunk/Dev: Try to fix a problem with the TR55 window crashing in the dev release version when it first comes up. ........
Revision: 26508; Author: csmemoe; Date: Wednesday, November 06, 2013 5:34:24 PM; Message: Merged revision(s) 26505 from devproj/trunk/Dev: Fixed text attribute strings in compute GIS attributes dialog. ........
Revision: 26363; Author: csmemoe; Date: Wednesday, October 30, 2013 6:10:51 PM; Message: Merged revision(s) 26361 from devproj/trunk/Dev: Fixed problems importing HEC-RAS geometry files-did not read Manning's roughness correctly from these files. Also cleaned up lots of the shared/rivmod code. ........
26237; Author: csmemoe; Date: Friday, October 25, 2013 2:37:18 PM; Message: Update WMS Release Version number
Revision: 26226; Author: csmemoe; Date: Friday, October 25, 2013 10:27:42 AM; Message: Fixed issue 0006656: Helpstrings for "Compute Time Area Curve" button and "Compute Parameters – Basin Data" button are switched
26216; Author: csmemoe; Date: Thursday, October 24, 2013 5:57:48 PM; Message: Merged revision(s) 26137 from devproj/trunk/Dev: WMS::HY-8 Fix for help PDF Help (replaces temporary check) ........
Revision: 26215; Author: csmemoe; Date: Thursday, October 24, 2013 5:55:15 PM; Message: Merged revision(s) 26205 from devproj/trunk/Dev: Fixed problems with plot menus not coming up in HY12 plot dialogs and in detention basin storage capacity curve dialog. ........
26019; Author: csmemoe; Date: Tuesday, October 15, 2013 1:48:30 PM; Message: Merged revision(s) 26017 from devproj/trunk/Dev: Fixed issue 0002019: Problem reading HEC-RAS solution for WMS Dev and HEC-RAS 4.1, fixed a problem running HEC-RAS from WMS, changed the stochastic modeling code so it does not require user interaction, and fixed stochastic modeling code so HEC-1 runs do not depend on the length of the path name to the HEC-1 input file. Also fixed a crash when running floodplain delineation after a stochastic run and a crash when exiting WMS. ........
25976; Author: csmemoe; Date: Friday, October 11, 2013 1:47:00 PM; Message: Merged revision(s) 25975 from devproj/trunk/Dev: Fix problem with joining SSURGO data when you have "spatial" somewhere in the path of the shapefile other than under the base directory containing the shapefile data. ........
25968; Author: csmemoe; Date: Friday, October 11, 2013 9:57:08 AM; Message: Merged revision(s) 25946, 25967 from devproj/trunk/external_libs: Add user_online_sources.xml file to specify online sources that are not available in Global Mapper by default (Added FEMA flood map web services).
1. Added FEMA flood maps to list of possible web services.
2. Merged revision(s) 25965 from devproj/trunk/Dev:
3. Added FEMA flood maps to list of possible web services.
25940; Author: csmemoe; Date: Thursday, October 10, 2013 9:55:26 AM; Message: Merged revision(s) 25935 from devproj/trunk/Dev: Added support for Web Feature Services (WFS) to global mapper web services. Handle reading vector data from OGC WFS services. ........
25911; Author: csmemoe; Date: Tuesday, October 08, 2013 4:04:38 PM; Message: Merged revision(s) 25909 from devproj/trunk/Dev: Fixed crashes when exporting riprap profiles to a report. ........
25892; Author: csmemoe; Date: Tuesday, October 08, 2013 9:50:54 AM; Merged revision(s) 25876 from devproj/trunk/Dev/WMS/APP/source/display/displayopt.cpp: Added option to display cross section ID's and display options. ........
25803; Author: csmemoe; Date: Wednesday, October 02, 2013 9:25:47 PM; Message: Fixed an error caused by a merge
25798; Author: csmemoe; Date: Wednesday, October 02, 2013 5:45:55 PM; Message: Merged revision(s) 25797 from devproj/trunk/Dev/WMS/APP/source/Hydrology/GSSHA/casc2d.cpp: Fix a problem with reading solution files when not running a calibration and maintain code that correctly reads calibration solution files. ........
25657; Author: ejones; Date: Thursday, September 26, 2013 11:12:38 AM; Message: Merged revision(s) 25656 from devproj/trunk/Dev/WMS/APP/bin/modrat: Fixed a bug in Modrat with generating a hydraulic parameter table used for channel routing ........
25518; Author: csmemoe; Date: Wednesday, September 18, 2013 3:32:23 PM; Message: Merged revision(s) 25517 from devproj/trunk/Dev: Cleaned up some code in ocmodels.cpp-determining what Tree Mapping does. ........
25487; Author: csmemoe; Date: Tuesday, September 17, 2013 4:20:31 PM; Message: Fixed a problem with images that were not displayed being checked in the project explorer window.
25240; Author: csmemoe; Date: Friday, September 06, 2013 9:25:10 AM; Message: Merged revision(s) 25239 from devproj/trunk/Dev: Fixed issue 0006424: WMS not saving user defined DEM names ........
25226; Author: csmemoe; Date: Thursday, September 05, 2013 3:04:31 PM; Message: Merged revision(s) 25223 from devproj/trunk/Dev/WMS/APP/source/Hydrology/GSSHA/casc2d.h: Fixed issue 0006481: Error Opening Summary File in Gssha Calibration (tut 57) and cleaned up lots of code related to solutions, etc. ........

Revision: 25207 Author: csmemoe Date: Wednesday, September 04, 2013 4:54:01 PM Message: Merged revision(s) 25206 from devproj/trunk/Dev: Fixed issue 0006287: Difference between 32 and 64 bit version in tut63. Also added capability to print out link/node names in detailed report file for selected links nodes. ........

Revision: 25139 Author: csmemoe Date: Tuesday, September 03, 2013 8:21:44 AM Message: Updated the HY-8 7.30 version number.

Revision: 25012 Author: csmemoe Date: Monday, August 26, 2013 10:48:44 AM Message: Update WMS 9.1.x version number.

Revision: 25011 Author: csmemoe Date: Monday, August 26, 2013 10:47:16 AM Message: Update hydraulic toolbox 4.0.x version number.

Revision: 24964 Author: csmemoe Date: Friday, August 23, 2013 1:44:47 PM Message: Merged revision(s) 24951 from devproj/trunk/Dev/WMS/APP/source/Feature/fcoverage.cpp: Added support to automatically map the global land use and soil shapefile data to map module feature object data. ........

Revision: 24933 Author: csmemoe Date: Thursday, August 22, 2013 6:35:07 PM Message: Merged revision(s) 24932 from devproj/trunk/Dev: Fixed problem with virtual earth map locater tool showing up in the ocean if you have the Hydrologic modeling wizard up. ........

Revision: 24925 Author: csmemoe Date: Thursday, August 22, 2013 4:28:55 PM Message: Merged revision(s) 24924 from devproj/trunk/Dev: Fixed WMS so it sets the main channel slope if the string "main channel slope" or other possible names are found in the NSS parameter description. ........

Revision: 24912 Author: csmemoe Date: Thursday, August 22, 2013 2:58:36 PM Message: Merged revision(s) 24908 from devproj/trunk/Dev: Added USA Topo maps to the main online data dialogs so you don't have to click on the Advanced button. ........

Revision: 24911 Author: csmemoe Date: Thursday, August 22, 2013 2:56:01 PM Message: Merged revision(s) 23041 from devproj/trunk/Dev: Fixed problem with web services that did not allow downloading data from http://xmswiki.com/xms/WebServiceCatalog ........

Revision: 24886 Author: ejones Date: Thursday, August 22, 2013 11:50:04 AM Message: Fixes for Modrat Cross Section WorkMerged revision(s) 24871-24883 from devproj/trunk/Dev/WMS: Rectangular cases are now matching closely! ........ Fixes for Modrat Cross Section Work ........ Fixes for Modrat Cross Section Work ........ Fixes for Modrat Cross Section Work ........

Revision: 24862 Author: csmemoe Date: Wednesday, August 21, 2013 5:21:42 PM Message: Fixed WMS 9.1 to be able to read online images with colons and other unacceptable characters in the filename.

Revision: 24859 Author: csmemoe Date: Wednesday, August 21, 2013 5:08:10 PM Message: Handle online images with unauthorized characters in the filename (\/:*?"<>|) and handled exceptions in online images without crashing.

Revision: 24848 Author: csmemoe Date: Wednesday, August 21, 2013 2:35:31 PM Message: Fixed a crash when getting data from map or when using the Get Data tool if you select an option from the "Advanced" button in the Online Data dialog. Also fixed a problem with characters that cannot be used in filenames when using this button.

Revision: 24747 Author: csmemoe Date: Monday, August 19, 2013 3:00:59 PM Message: Merged revision(s) 24743 from devproj/trunk/Dev: Fixed problem that caused vertical units to change when selecting the Virtual Earth map locater tool. See issue 0006240: After setting the current projection vertical units to feet from meters (Tutorial 62) ........

Revision: 24683 Author: csmemoe Date: Thursday, August 15, 2013 5:51:31 PM Message: Merged revision(s) 24682 from devproj/trunk/Dev: Updated QuickPDF Unlock Code to permanent license code (until we upgrade global mapper and there's a new version of QuickPDF included with GM). ........

Intermediate Release 9.1.7 – August 13, 2013

WMS 9.1.7 has been posted on Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/downloads. The following known bugs have been fixed in this version:

Id-Date Submitted-Updated-Summary

6464-7/31/2013-8/7/2013-Hydrograph timing messed up when exporting HEC-HMS hydrographs with a SWMM input file
6456-7/26/2013-8/7/2013-Problem reading NRCS data from soil files
6471-8/2/2013-8/5/2013-Crash when saving TIN to grid format
6463-7/31/2013-8/5/2013-wmsdss.exe crashes when reading HEC-HMS solution

Intermediate Release 9.1.6 – July 18, 2013

WMS 9.1.6 has been posted on Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/downloads. The following known bugs have been fixed in this version:

Id-Date Submitted-Updated-Summary

5001-4/19/2012-6/25/2013-The HSPF dialog doesn't close after you define the parameters for Snow and Water.
6219-5/9/2013-6/18/2013-"In Tutorial 10, HEC-1 is unable to open input file."
6129-4/11/2013-6/18/2013-Problem running HEC1 on computers at NHI training course
6165-4/24/2013-6/18/2013-HEC-1 File Name and Path limitations (from Scott Hogan @ FHWA)
6068-3/21/2013-6/18/2013-HEC-1 Fails to load input files with a filepath >80 characters
6314-6/6/2013-6/14/2013-Bug computing storage from DEM when vertical units are in meters
6053-3/18/2013-6/13/2013-Two Time Computation Saving Permissibility
6204-5/6/2013-6/13/2013-Intermediate tests failing
6286-5/28/2013-6/13/2013-Default Selection in 64-bit version HEC-1 Unit Hydrograph Methods window Bug (Watershed Modeling - MaricopaNSS)
6250-5/17/2013-6/12/2013-Lines extend when you select the Hydrological modeling module (Tut 15)
6289-5/28/2013-6/11/2013-Crash when mapping shapefile to features
6239-5/16/2013-6/11/2013-The Peak & Volume Boxes are read only when they should be editable (Automated Calibration Tutorial 58)
6057-3/19/2013-5/7/2013-Hydrolic Modeling Dialog Crashes on NULL Values
6130-4/11/2013-5/3/2013-Rational Method Interface tutorial has problems
6201-5/3/2013-5/3/2013-WMS Crashes in Tutorial 4 Section 6.1
6184-4/29/2013-5/3/2013-Problem renumbering storm/tile drains in WMS 9.1
6178-4/29/2013-5/3/2013-Documentation missing step (W_20)
6193-5/1/2013-5/2/2013-Problems with the units in tutorial 36
6194-5/2/2013-5/2/2013-"Message box pops up that says ""Error: No links found"" after saving GSSHA project file (Tutorial 46)"
6183-4/29/2013-5/1/2013-Problem assigning groundwater BC to streams in GSSHA model
6182-4/29/2013-5/1/2013-"Problems reading, writing, and editing files for the Multi Layer Green and Ampt (MLGA) method in WMS 9.1"
6166-4/24/2013-5/1/2013-Problem Trimming DEM
6176-4/29/2013-4/30/2013-WMS crashes on changing Point Display step for DEM
6117-4/9/2013-4/18/2013-Cryptic Error code message when online image servers are down
6016-3/7/2013-3/13/2013-"Selecting ""Show Dates"" in User Hyetograph dialog changes time interval in dss files"
6032-3/12/2013-3/12/2013-Problem reading ArcInfo and GRASS ascii flow directions and accumulations
6027-3/8/2013-3/11/2013-Deleting a point takes a very long time
6010-3/7/2013-3/8/2013-WMS crashes you try to view scatter dataset properties
6011-3/7/2013-3/8/2013-Opening *.hdr file created in ArcGIS crashes WMS
6012-3/7/2013-3/8/2013-WMS crashes when click OK on XY Series Editor when defining a hydraulic structure
6000-3/6/2013-3/7/2013-"WMS reverts back to same ""All"" row when you change it in HMS properties dialog"
6013-3/7/2013-3/7/2013-CE-QUAL top layer widths less than the widths of the Segments
4496-12/15/2011-3/7/2013-"Unable to read a CAD file, probably Shared Code issue"
4530-1/3/2012-3/7/2013-Problem getting online images when using remote desktop
4531-1/3/2012-3/7/2013-Problem with registration of a static image created from an online image
4538-1/4/2012-3/7/2013-The 'Setup All Precip Events' button does not work
4580-1/12/2012-3/7/2013-WMS not responding
4649-1/31/2012-3/7/2013-DEV - WMS freezes when converting online image to GeoTIFF
4683-2/7/2012-3/7/2013-Oblique view zooming issue with GSSHA solution
4690-2/8/2012-3/7/2013-Importing CMT file in WMS 8.4 does not import all data
4694-2/9/2012-3/6/2013-Can't import more than 1 GeoTIFF DEM at a time
4703-2/10/2012-3/6/2013-"Update ""Images"" menu in the Map Data menu items"
4757-2/22/2012-3/6/2013-WMS fails to save a CAD file for hydrologic modeling tree data
4761-2/23/2012-3/6/2013-Problem reading TIN datasets after computing using the data calculator
4552-1/6/2012-3/6/2013-GSSHA makes computer run out of memory when running a constituent transport simulation
5984-3/4/2013-3/6/2013-Problem with Getting Online Maps when only CAD data is defined
5982-3/4/2013-3/5/2013-DXF and DWG files display problem: Thick lines
5082-5/7/2012-3/5/2013-Channel Calculator issue
5092-5/8/2012-3/5/2013-msvcr71.dll error when running wmstopaz.exe
5518-9/26/2012-3/5/2013-Save project crash with GeoPDF with cropped collar
5552-10/5/2012-3/5/2013-WMS is unable to write to the worldfile unless images are stored in the project directory
5572-10/11/2012-3/4/2013-Check long term simulation tutorial and calibration tutorial to see if everything is working fine with WMS 9.0
5601-10/18/2012-3/1/2013-Problem displaying flow paths and moving basin labels
5495-9/18/2012-3/1/2013-Unable to download many of the soil and land use options in WMS
5605-10/18/2012-3/1/2013-WMS is not creating frames for the .AVI animations for GSSHA solutions
5713-11/28/2012-2/28/2013-"When adding new polygon, all previous colors are reset"
5826-1/15/2013-2/28/2013-WMS doesn't create Routing Hotstart File when option is checked on
1140-7/10/2009-2/27/2013-Join SSURGO data doesn't work when adding a custom attribute before joining
5062-5/3/2012-2/27/2013-freeze when changing all arcs in a GSSHA coverage to a different type
3952-8/10/2011-2/26/2013-Selected crossing/crossing name not saved
4189-9/29/2011-2/25/2013-Support .las and .dtm file formats.
5902-2/6/2013-2/25/2013-Problem reading solutions as 2D scattered data from HEC-RAS GIS files

Release 9.1/Intermediate Release 9.1.4 – February 22, 2013

WMS 9.1.4 has been posted on Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/downloads. The following known bugs have been fixed in this version:

Bug ID Date Submitted–Date Updated—Summary

5867 1/30/2013–2/22/2013—Crash when running the OC Rational method
5866 1/30/2013–2/22/2013—HEC-HMS files exported from WMS freeze up after selecting sub basins
4117 9/12/2011–2/21/2013—Error when loading GSSHA solution in Contaminants tutorial
5945 2/19/2013–2/19/2013—The Edit... button in the Culvert and Site Data section in the HY8 Modeling Wizard is missing
5944 2/19/2013–2/19/2013—WMS crashes when navigating through the HY8 modeling wizard
5846 1/22/2013–2/19/2013—Print out error information when running the OC rational method
5868 1/30/2013–2/19/2013—The Crest Elevation is not saved in the Crossing Data dialog
5874 1/31/2013–2/19/2013—Save curve number and other report files to Temp directory instead of current directory
5888 2/1/2013–2/19/2013—WMS 9.1 reports a missing resource when renumbering a MODRAT tree
5941 2/18/2013–2/19/2013—Incremental Data Checkbox does not show up in Figure 4-3 of GSSHA Nexrad tutorial
5856 1/24/2013–2/15/2013—Add capability to compute layer widths less than 5 meters in the CE-QUAL-W2 Layer Editor
5901 2/6/2013–2/14/2013—Add the .sdf extension to the list of filters that can be read when importing an HEC-RAS GIS file
5918 2/7/2013–2/13/2013—WMS crashes when trying to acces HY-8
5930 2/13/2013–2/13/2013—Issue with Drainage Coverage Tree | Find tool
5903 2/6/2013–2/13/2013—Problem reading floodplain boundary into WMS
5904 2/6/2013–2/12/2013—Problem extracting cross sections if you have a cross section point that coincides with a TIN vertex
5923 2/11/2013–2/11/2013—Problem with extra pipes associated with a superlink arc when building a GSSHA storm/tile drain model
5905 2/6/2013–2/8/2013—Check adding storm/tile drain pipes without connecting them directly to a channel at the downstream end
5897 2/5/2013–2/8/2013—WMS crashes when assigning reach routing for OC Rational model
4477 12/12/2011–2/7/2013—Online Map issues
4437 12/6/2011–2/7/2013—Add options to download online vector data through Global Mapper
4435 12/6/2011–2/7/2013—Fix problem with online image taking a long time to load after zooming or panning
4410 11/30/2011–2/7/2013—Outlet issues
4337 11/9/2011–2/7/2013—More than one plot is selected to be generetaded when using the channel calculator
5909 2/6/2013–2/6/2013—Crash when reading LandXML file
4312 11/2/2011–2/5/2013—Right clicking to access Display Options should select the correct module first
4281 10/25/2011–2/5/2013—Crash in GSSHA Land use change #2 tutorial
4246 10/17/2011–2/5/2013—Problems in the HY8 modeling wizard that should be addressed (from Jim)
4207 10/6/2011–2/4/2013—Bug with approximate total number of points in Import DEM dialog
4202 10/5/2011–2/4/2013—Tin Triangles not Displaying when option to display triangles is checked
4200 10/5/2011–2/4/2013—Crop Collar not working
4181 9/29/2011–2/4/2013—Recompute All Stations should also delete the river hydraulic schematic
4138 9/15/2011–2/1/2013—WMS using Outlet IDs instead of Outlet Names in SWMM dialog
5749 12/7/2012–2/1/2013—0005734: Share the app name and registry path stuff
5745 12/6/2012–2/1/2013—Problem computing water surface elevations using the channel calculator
4077 9/2/2011–1/31/2013—Cell elevation text does not match setting
4021 8/22/2011–1/31/2013—Contour values do not exactly match DEM values
4011 8/19/2011–1/31/2013—Problems with node boundary contitions in GSSHA
3984 8/15/2011–1/31/2013—DEM Display Issues
3972 8/12/2011–1/31/2013—Memory issue continues after project is closed
3969 8/12/2011–1/31/2013—GSSHA Menu not displayed
3968 8/12/2011–1/31/2013—Not all DEM points display
3967 8/12/2011–1/31/2013—Contours displaying wrong
3962 8/11/2011–1/31/2013—Pipe Flow scatter data not working properly
3931 8/9/2011–1/31/2013—DXF/DWG files not exporting
3890 8/2/2011–1/31/2013—Linked outlets and nodes not saved in WMS
3888 8/2/2011–1/31/2013—WMS Duplicates SWMM hydraulic schematic
3887 8/2/2011–1/31/2013—Cannot delete Hydraulic Schematic data
3869 7/28/2011–1/31/2013—Adding an embankment to a DEM does not seem to impact flow directions
3833 7/20/2011–1/31/2013—Cannot enter reach and reservoir routing at same node in HEC-HMS
3822 7/19/2011–1/31/2013—Problem displaying stream height cylinders in oblique view (WMS)
3817 7/15/2011–1/31/2013—Redistributed stream display problem
3816 7/15/2011–1/31/2013—Big letters displayed on button instead of symbol
3815 7/15/2011–1/31/2013—Link numbers do not stay aligned with links
3814 7/15/2011–1/31/2013—Vertices appear as nodes
3806 7/14/2011–1/31/2013—2D scatter set will not duplicate
3801 7/13/2011–1/30/2013—HY12 Tutorial Issues
3673 6/15/2011–1/30/2013—WMS writing wrong rainfall card for EPA SWMM tutorial
3605 6/1/2011–1/30/2013—gssha crashes before it finishes running when using the green and ampt infiltration option
3600 6/1/2011–1/30/2013—Shared tests failing in WMS but passing in SMS.
5834 1/17/2013–1/30/2013—Flows not being computed for MODRAT model
3538 5/18/2011–1/29/2013—Limiting Number of Cross sections in Simplified Dam Break Model
3493 5/9/2011–1/29/2013—Cannot register MPICH2 without a password
3228 3/10/2011–1/29/2013—Compile error when running the shared build
3100 2/10/2011–1/29/2013—contours not updating when making large change in specified interval
2905 12/22/2010–1/29/2013—Multiple Tc arcs generated
2615 9/29/2010–1/29/2013—MODRAT burned simulation not incrementing soil number
5782 12/26/2012–1/29/2013—Add Custom1 copy protection option to WMS 9.1 and Dev
2594 9/21/2010–1/25/2013—Digital dams, 2D grid flow vectors, and elevations not updating when you adjust 2D grid elevations
2578 9/14/2010–1/25/2013—WMS crashes when converting DEM to TIN after editing TOPAZ generated streams
2577 9/14/2010–1/25/2013—WMS crashes when reversing directions of a stream network
2566 9/9/2010–1/25/2013—The Cross Section Attributes dialog gives bogus help strings
2558 9/9/2010–1/25/2013—CAD file (.dwg) saved out from TIN tutorial does not open in AutoCAD 2008
2555 9/9/2010–1/25/2013—Feature Request for georeferenced PDFs
2553 9/8/2010–1/25/2013—WMS crashes when inserting breaklines
2547 9/7/2010–1/25/2013—WMS displays an image in previous view, even when previous view is oblique
2426 7/21/2010–1/25/2013—Printing in WMS 8.3 not as clear as 8.0
2259 5/26/2010–1/25/2013—Error Selecting Polygons
2254 5/26/2010–1/25/2013—wms 8.3 BUG - opening jpeg when language is korean
2243 5/24/2010–1/25/2013—convert dem to filtered TIN crash
2131 4/23/2010–1/25/2013—Error building pyramids
2238 5/20/2010–1/25/2013—Problem swapping edges or inserting breaklines on TINs
2232 5/19/2010–1/25/2013—In MODRAT when you input a hydrograph it only uses the first 1500 minutes of the hydrograph.
2180 5/4/2010–1/25/2013—DEM contours to feature objects crash in WMS 8.3
2219 5/13/2010–1/24/2013—Crash when closing WMS after reading stochastic GSSHA solution
2124 4/22/2010–1/24/2013—Issue reading an image file
2081 4/14/2010–1/24/2013—WMS often exports duplicate points in HEC-RAS cross-sections when using bank arcs
2053 4/7/2010–1/24/2013—After running the SMPDBK model some of the output data is inconsistent.
2049 4/6/2010–1/24/2013—Hydrologic Modeling Tree display
2018 3/29/2010–1/24/2013—Terraserver (MSRMaps) issue
2017 3/29/2010–1/24/2013—Cropping collar problem with TIFFs in WMS 8.3
2016 3/29/2010–1/24/2013—Problems reading JPEG and TIFF Images in WMS 8.3
2015 3/29/2010–1/24/2013—area calculation of basins
1987 3/15/2010–1/24/2013—Closed bracket in WMS title bar moves one space while panning in WMS
1985 3/12/2010–1/24/2013—HMS Interface does not include kinematic wave reach routing for rectanglular or triangular channels
1943 3/3/2010–1/24/2013—SWMM link and node information not saved
1859 2/3/2010–1/24/2013—WMS 8.2 not able to save the 3 DEMs
1823 1/25/2010–1/24/2013—Unable to rename Cross section reach name
1779 1/15/2010–1/24/2013—Crop – Uncrop Collar not working on jpeg
1751 1/5/2010–1/24/2013—Delineate Basins Wizard shifts the TOPAZ stream network
1743 1/4/2010–1/24/2013—NSS not showing correct regions for Utah
1742 1/4/2010–1/24/2013—HEC-1 will not run while an image is loaded
1673 12/3/2009–1/24/2013—The SetItemData function changed from taking a DWORD to DWORD_PTR. 64-bit issue
1249 7/31/2009–1/23/2013—Importing multiple USGS DTED DEMs of varying resolutions creates problems
1239 7/30/2009–1/23/2013—NSS reports 0% error for all simulations
1238 7/30/2009–1/23/2013—Change tutorial files installation path to \My Documents instead of \Program Files
1232 7/29/2009–1/23/2013—GSSHA wiki, Tutorial 3 Fixing Digital Dams, Display Options Crash
1214 7/23/2009–1/23/2013—The shapefile "basins.shp" does not display properly in the Chapter 2, Maricopa County tutorial.
1171 7/15/2009–1/23/2013—Problem writing a KMZ animation file from WMS 8.2
1151 7/13/2009–1/23/2013—The run1.wpr file located on 'files' is more complete than the Volume 3, Chapter 4, Stochasic Modeling tutorials calls for.
1142 7/10/2009–1/23/2013—Need better way of assigning HYDGRP parameters when joining SSURGO data
1089 6/29/2009–1/23/2013—Process combined index map using land use and soil maps instead of coverages
1029 6/11/2009–1/23/2013—Deleting arcs takes a long time (because of UpdateVertToArcMap in feConvertVertexToNode)
982 5/29/2009–1/23/2013—NFF Error in 8.0 and previous – Charles Lutter
894 5/5/2009–1/22/2013—NEXRAD radar rainfall division by 0 error
872 4/29/2009–1/22/2013—MODRAT does not compute any ordinates for hydrographs
861 4/28/2009–1/22/2013—Problem displaying image in GIS module with ArcObjects enabled
859 4/28/2009–1/22/2013—WMS not responding when extracting cross-sections from this TIN
651 3/4/2009–1/22/2013—Crash when converting from drainage to a 1-D hydr. centerline coverage
632 2/27/2009–1/22/2013—WMS Printing Text Bug
618 2/26/2009–1/22/2013—SWMM hydrauilc schematic data is not saved to or read from the wms or wpr project file
551 2/6/2009–1/22/2013—Using the default GSSHA *.cmt file to generate initial parameters
550 2/6/2009–1/22/2013—Verify GSSHA smooth streams to thalweg data is working correctly
539 2/6/2009–1/22/2013—WMS creates duplicate feature arcs when converting this CAD file to Feature Arcs
427 1/13/2009–1/22/2013—Change all *.wpr files in the WMS 8.2 tutorials to *.wms files
275 12/3/2008–1/22/2013—One too many discharge curves shown in reservoir storage capacity window for MODRAT
256 11/24/2008–1/22/2013—Adding and retrieving diversions messes up tree item display when panning
251 11/21/2008–1/18/2013—Interpolation error message in detention basin calculator
212 11/12/2008–1/18/2013—There is a heap corruption (writing beyond the bounds of allocated memory) when running through the TINs tutorial-difficult fix
198 11/10/2008–1/18/2013—CAD→TIN command not working for Bowman Dam CAD file
197 11/10/2008–1/18/2013—CAD file displays in WMS 8.0 but not WMS 8.1
838 4/22/2009–1/18/2013—The projection dialog needs to be larger- or at least be resizable
117 10/16/2008–1/18/2013—pon Completion of the second step or the Volume 6, Chapter 3 Tutorial (NEXRAD), WMS Crashes.
285 12/8/2008–1/18/2013—Optimize drawing the soil and land use legends
187 11/6/2008–1/18/2013—Problem importing infiltration parameters from saved GSSHA projects
172 10/31/2008–1/18/2013—Vanishing WMS Bug
5796 1/4/2013–1/18/2013—allow more than 300 rows of data in HEC-HMS XY series windows
5794 1/4/2013–1/18/2013—CN doesn't update in TR-55 when a project with a computed CN is added
5808 1/8/2013–1/18/2013—Stream link numbers don't refresh
5830 1/15/2013–1/17/2013—Letter "e" is missing in the word "Select" for Select grid column
5742 12/5/2012–1/17/2013—Problem getting NED DEM data for Hawaiian Islands
5813 1/10/2013–1/14/2013—Several bugs related to the OC Rational method
5783 12/28/2012–1/11/2013—GIS to feature objects wizard doesn't transfer land use names
5784 12/28/2012–1/10/2013—rename "Level2" option in GIS to feature objects wizard
4467 12/9/2011–1/10/2013—The WDM file can't be read when trying to define external sources when using HSPF.
5579 10/12/2012–1/9/2013—It takes a long time to read WMS Map files
4837-3/13/2012–1/8/2013—Make sure all the tutorials (especially the first few) have the correct directories where the files are located
5415 8/20/2012–1/4/2013—Changed to culvert parameters not saved
5530 10/1/2012–1/3/2013—(Your horizontal and vertical units are inconsistent)-message for some tutorials
5731 11/30/2012–12/27/2012—Crash when trying to run an OC Rational simulation
5571 10/11/2012–12/27/2012—Possible problem reading solutions from multiple scenarios
5712 11/28/2012–12/26/2012—WMS only updates the CELL ID when you select cells in a GSSHA model
5554 10/8/2012–12/14/2012—WMS does not recognize MODRAT project file or MODRAT solution file
5565 10/10/2012–12/14/2012—Add an option to modify the active dataset for more than one cell on your 2D grid
5570 10/11/2012–12/13/2012—Problem with tutorial 55: GSSHA Overland Flow
5592 10/15/2012–12/13/2012—Transition to new CheckForVersion function for version checking
5604 10/18/2012–12/12/2012—Color fill contour method is not working for displaying GSSHA solutions
5608 10/19/2012–12/12/2012—Issue with computing the CN for a TR55 model
5610 10/19/2012–12/12/2012—Problem downloading data when using UTM coordinates with units of feet
5607 10/19/2012–12/11/2012—Problem downloading data when using State Plane coordinates
5700 11/19/2012–12/10/2012—The fields for Point #3 are not active in the Register Image dialog
5744 12/6/2012–12/10/2012—Problem Merging TINs
5750 12/7/2012–12/10/2012—The XY Series editor is causing WMS to crash
5706 11/20/2012–12/6/2012—The crossings calculated by HY8 are not shown in the HY8 wizard in WMS
5678 11/9/2012–12/3/2012—Problem with numbering WMS soil IDs
5656 11/6/2012–12/3/2012—Use the same shared code to determine resolution when using the get data tools or when exporting/converting raster data
5655 11/6/2012–11/30/2012—Create export and conversion options for all types of raster data
5569 10/11/2012–11/30/2012—Fix dialog tab ordering
5654 11/6/2012–11/28/2012—Use the same shared code when converting or exporting online or static raster data to another format
5653 11/6/2012–11/21/2012—Share the Get Online Maps dialog with the Get Data tools in webservices.cpp
4949 4/4/2012–11/16/2012—clicking the define button in the HSPF segments dialogue takes a very long time to open
5084 5/7/2012–11/16/2012—Implement computing GSSHA index maps using land use and soil type grids (8 hours)
5551 10/5/2012–11/6/2012—Can't compute flow directions and accumulations in GSSHA Tutorial
5550 10/5/2012–11/6/2012—Missing Information in the Landuse ID box
5563 10/9/2012–11/6/2012—WMS is crashing when using Hydraulic Toolbox to generate Storage Discharge Curves
5561 10/9/2012–11/6/2012—WMS crashes when using the Importing USGS DEMs dialog
5213 6/20/2012–11/6/2012—We need to move the tutorials to live with our code.
5526 9/27/2012–11/6/2012—Share GMS' options to convert online data to static data (24 hours)
5594 10/15/2012–11/2/2012—Show the Teigha version in the WMS Help | About command
5593 10/15/2012–11/2/2012—Add Lat/Lon coordinates at the bottom of the WMS window, similar to GMS
5595 10/15/2012–11/2/2012—Remove the Quick Tour from the WMS Help menu
5624 10/25/2012–10/31/2012—HY-12 is not building
5583 10/12/2012–10/31/2012—A separate coverage is created when converting CAD objects
5577 10/11/2012–10/31/2012—The vertical units are changed when reading in a DEM with *.asc extension
4795 3/5/2012–10/30/2012—HEC time of concentration not converted from min to hr
585 2/13/2009–10/30/2012—Error when trying to run HSPF
4937 4/2/2012–10/30/2012—"Could not open WDM file" error during HSPF tutorial
5615 10/22/2012–10/25/2012—When saving a file in WMS, the *.hyd file can't be created after running the hydraulic toolbox
5146 5/31/2012–10/23/2012—The time series data editor is not working
5002 4/20/2012–10/23/2012—Menu command to read a GEoTIFF DEM
5467 9/6/2012–10/22/2012—WMS crashes if a feature point is created where a point already exists
5093 5/9/2012–10/22/2012—WMS crashes when you close the program if you're using a storm drain FHWA coverage
5472 9/7/2012–10/19/2012—Problems with mapping attributes from storm drain shapefile to storm drain coverage (submitted by Nate Dye)
5474 9/7/2012–10/18/2012—TOPAZ does not run on computers with the Microsoft visual studio 2005 redistributable package
5496 9/18/2012–10/17/2012—WMS has a hard time downloading certain types of elevation data from Web Services
5221 6/21/2012–10/17/2012—WMS shows no graphics for lexington.dwg
5511 9/24/2012–10/17/2012—Need to frame after reading a *.dgn file (maybe *.dwg file also)
5512 9/24/2012–10/17/2012—Crash in DEM | Point Attributes for multiple cells
4390 11/23/2011–10/17/2012—QC Testing – HY-12 Tutorial errors
5033 4/25/2012–10/17/2012—The channel calculator opens up when you click Create Stage Point
5529 9/28/2012–10/2/2012—Convert to Static Image is not working

Release 9.0/Intermediate Release 9.0.8 – October 5, 2012

WMS 9.0.8 has been posted on Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/downloads. The following known bugs have been fixed in this version:

Bug ID Date Submitted—Updated-Summary

5399 8/15/2012–9/28/2012—WMS should read in HEC-RAS water surface elevations from *.geo files
5492 9/17/2012–9/27/2012—WMS 9.0 freezes when attempting to load a GeoTIFF with land use data
5447 8/31/2012–9/26/2012—Texture Mapping Behavior
5389 8/13/2012–9/26/2012—Duplicate TINs option is messed up
5390 8/13/2012–9/25/2012—Problem adding points to a TIN
4828 3/9/2012–9/13/2012—Texture mapping does not work
5383 8/9/2012–9/13/2012—Contours lines turn themselves back on when you adjust a node of a texture mapped tin
5388 8/13/2012–9/13/2012—Crash when converting a 2D scatter file to a TIN
5411 8/17/2012–9/13/2012—crash when downloading from web
5439 8/30/2012–9/12/2012—Problem running GSSHA when max-min/NUM_INTERP for a break point cross section > 1.0
5440 8/30/2012–9/12/2012—WMS crashes when you double click on multiple basins in a row
5461 9/5/2012–9/12/2012—Option to Export Image
5462 9/5/2012–9/12/2012—WMS crashes when trying to change the attributes of an arc created outside a GSSHA grid
5465 9/6/2012–9/11/2012—WMS progress bar stays at zero when loading some GeoTiff files
5302 7/18/2012–9/10/2012—Warning message remains on screen after WMS finishes writing files for HMS
5199 6/13/2012–9/5/2012—WMS crashes after closing the Channel Calculations dialog
5201 6/14/2012–8/30/2012—WMS crashes after closing the GSSHA Contaminants dialog
5212 6/20/2012–8/30/2012—crash when defining a detention basin
5224 6/25/2012–8/30/2012—NSS crashes when the user enter a basin area of zero and presses the compute results button
5424 8/24/2012–8/29/2012—There is an error message when trying to export a GIS file WMS 9.0x64
5251 7/2/2012–8/27/2012—Handle data outside of selected bounds for the Get Data command (6 Hours)
5253 7/2/2012–8/23/2012—Check Defining Cross Section D and Z values (6 Hours)
5265 7/6/2012–8/21/2012—Problem with assigning mapping table values from a GSSHA mapping table file (again)
5272 7/11/2012–8/20/2012—drainage basin display options button does not resize with display options window
5304 7/20/2012–8/20/2012—crash when selecting a basin, exiting, and then selecting the basin again
5308 7/20/2012–8/20/2012—WMS crashes when trying to select a basin
5309 7/20/2012–8/17/2012—WMS freezes when attempting to load a project file
5311 7/20/2012–8/16/2012—extracted cross sections are different when using TIN and DEM
5340 7/27/2012–8/16/2012—WMS freezes when reading in a GSSHA solution
5325 7/24/2012–8/16/2012—input hydrograph file not written correctly in MODRAT project
5338 7/26/2012–8/15/2012—WMS crashes/freezes when trying to convert from shapefile to feature objects
5324 7/23/2012–8/14/2012—WMS crashes after closing the HGL and EGL profiles window
5195 6/13/2012–7/24/2012—Need a way to import storm drain attributes from a shapefile to WMS storm drain module
5143 5/31/2012–6/22/2012—contour legend not included in print out
5113 5/16/2012–6/22/2012—WMS partially freezes when saving a file in the Hydrologic Modeling Module
5114 5/16/2012–6/22/2012—Image files for bug report 5113.
5104 5/11/2012–6/21/2012—Crash when viewing land use attribute legend
5021 4/23/2012–6/21/2012—The Define... button in the Detention Basin Hydrograph Routing dialog doesn't work
5145 5/31/2012–6/20/2012—Problem with units when defining HEC-1 reservoir data
5141 5/30/2012–6/18/2012—WMS crashes when you close the Channel Analysis dialog
5103 5/11/2012–6/18/2012—Extra quotes added at the end of a weir (and possibly other structures) when launching the detention basin calculator from WMS
4816 3/7/2012–6/18/2012—WMS Crash converting DEM to 2d grid
5131 5/22/2012–6/12/2012—WMS cannot export Thiessen Polygons to shape file if the raingage type is set to HEC
4829 3/9/2012–6/11/2012—Convert all triangle functions (such as gmComputeCircumcircle) to use shared triangle functions instead of WMS functions
4846 3/14/2012–6/7/2012—Problem with canceling getting data using web services
4850 3/14/2012–6/6/2012—Problem getting DEM data for really large areas
4971 4/12/2012–6/6/2012—WMS partially freezes when when trying to define storage capacity data
4847 3/14/2012–6/6/2012—-Bogus % Complete number in progress bar
4843 3/13/2012–6/4/2012—Crash in Basic Feature Objects tutorial-setting soil attributes
4963 4/6/2012–5/30/2012—HY-8 Wizard storage-capacity issue
5024 4/24/2012–5/18/2012—Select/Zoom Hydrologic Tree Elements
4946 4/4/2012–5/16/2012—Check the segment renumbering for CE-QUAL-W2
4990 4/18/2012–5/16/2012—Create Feature Point option in Single Point Reprojection dialog doesn't work
4994 4/18/2012–5/15/2012—Cannot save HEC-RAS model without a cross-section database without getting errors
4997 4/18/2012–5/15/2012—Crash when saving NSS project
5041 4/26/2012–5/11/2012—The Clean Up Model button in the GSSHA wizard is not working
5046 4/27/2012–5/11/2012—An additional (0,0) point is created when creating cross sections
5028 4/24/2012–5/8/2012—Option to change to metric units
5054 5/1/2012–5/8/2012—WMS crashes when you close the Constituent Mass window
5026 4/24/2012–5/7/2012—DEM doesn't overlap
5015 4/23/2012–5/7/2012—DEM and georeferenced image don't overlap
4855 3/15/2012–5/7/2012—WMS crashes when color filling soils polygons
5039 4/26/2012–5/3/2012—WMS crashes when you try to compute basin data (2)
5014 4/23/2012–5/3/2012—WMS crashes when you try to compute basin data
5020 4/23/2012–5/3/2012—WMS crashes when trying to change the projection for the DEM
5036 4/25/2012–5/3/2012—WMS crashes when you try to reproject a DEM
4845 3/14/2012–5/2/2012—Fix link in DEM Delineation tutorial: Section 4.4
4849 3/14/2012–5/1/2012—Specify toggle box has changed to "Set" toggle box in the Reprojection dialog
4883 3/21/2012–4/24/2012—HY8UnitsConversion.cpp and possibly other files are in 2 places
4872 3/19/2012–4/19/2012—The coverage type and attributes are changed when opening .map files
4995 4/18/2012–4/18/2012—WMS is not automatically updating the Energy Slope for routing.
4858 3/15/2012–4/18/2012—WMS can't find cross-section database
4868 3/19/2012–4/18/2012—WMS crashes/freezes when trying to open a *.map file
4579 1/12/2012–4/17/2012—Add global mapper as an option for elevation file I/O
4884 3/21/2012–4/12/2012—Concentration Points are not shown in the Orange County Rational Method – Tree Mapping dialog
4916 3/29/2012–4/12/2012—Add option to prevent values from being overirdden when computing basin data
4936 4/2/2012–4/9/2012—crash when trying to convert TIN to DEM
4926 3/30/2012–4/9/2012—WMS crashes when trying to assign precipitation info
4873 3/19/2012–4/6/2012—There is a problem loading HEC-RAS data
4760 2/23/2012–4/5/2012—crash when using the "GIS Data → Dataset" button for a GSSHA model
4938 4/2/2012–4/4/2012—WMS crashes if you try to close the 'Select Orange County GIS losses output file' dialog
4814 3/7/2012–4/4/2012—Index maps can't be created when using Data Calculator
4314 11/2/2011–3/29/2012—Add option to reverse the zoom direction of the mouse wheel
4697 2/9/2012–3/23/2012—Crash when loading in multiple DEMs
4786 3/1/2012–3/23/2012—Advanced DEM delineation tutorial issue
4712 2/13/2012–3/23/2012—Hydraulic Toolbox and WMS link is broken
4674 2/6/2012–2/29/2012—Problems with TIN breaklines
4469 12/9/2011–2/29/2012—Converting TIN to DEM results in bad data points
4677 2/6/2012–2/28/2012—freeze when trying to import GSSHA precipitation gage file
4661 2/1/2012–2/28/2012—OC Hydrograph GIS tutorial has the wrong title
4536 1/4/2012–2/28/2012—WMS in not properly creating the radarrain and radargrid *.dss files for HEC-HMS
4561 1/9/2012–2/27/2012—WMS is not properly creating the .dss file for HEC-HMS
4570 1/10/2012–2/27/2012—WMS crashes when trying to change display options for index maps
4645 1/30/2012–2/24/2012—Improper Unit
4664 2/2/2012–2/24/2012—WMS crashes while clicking "Next Hydrograph Station" button
4667 2/2/2012–2/24/2012—WMS writing wrong Overland BC code
4678 2/7/2012–2/22/2012—Slow printing when using an online image
4474 12/9/2011–2/22/2012—WMS in not properly creating the *.dss file for HEC-HMS
4318 11/2/2011–2/21/2012—HEC-HMS tutorial needs to be fixed
4412 11/30/2011–2/17/2012—WMS crashes when trying to change the display options for TINs
3578 5/26/2011–2/17/2012—HMS Properties Spreadsheet loses scroll location after entering Basin Data Tc dialog
4723 2/15/2012–2/15/2012—Saving as a google earth file does not work correctly.
4082 9/2/2011–2/13/2012—A single DEM appears twice in the project explorer.
3651 6/10/2011–2/13/2012—SCE file not found in GSSHA automatic calibration
4078 9/2/2011–2/13/2012—HSPF dialog takes a long time to appear
4376 11/17/2011–2/10/2012—Crash when importing EPA SWMM file
4266 10/21/2011–2/6/2012—DEM Does not default to correct coordinate system (projection) when importing
4265 10/21/2011–1/26/2012—Problem finding cross section database in attached file
4413 11/30/2011–1/26/2012—Web data not downloading

Release 9.0 Beta – January 24, 2012

WMS 9.0 Beta has been posted on Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/downloads. A list of significant new features is located here. The following known bugs have been fixed in this version:

Bug ID Date Submitted—Updated-Summary

4280 10/25/2011–1/24/2012—Problem with GSSHA stream arc file I/O in *.cif file
4279 10/25/2011–1/24/2012—Problem with GSSHA overland boundary condition in *.cmt file
4491 12/14/2011–1/20/2012—The check box in the All row in the properties dialog doesn't work
4489 12/14/2011–1/18/2012—HY-8 Shapes crash
4390 11/23/2011–1/18/2012—QC Testing – HY-12 Tutorial errors
4520 1/3/2012–1/18/2012—Crash when trying to create HY-12 structure
4307 11/1/2011–1/17/2012—Images tutorial needs to be fixed
4308 11/1/2011–1/16/2012—DEM Basics tutorial needs to be fixed
4311 11/2/2011–1/16/2012—DEM Delineation Tutorial needs to be fixed
4313 11/2/2011–1/16/2012—Advanced DEM Delination Tutorial needs to be fixed
4436 12/6/2011–1/13/2012—Extract elevation data from the Global Mapper online elevation data options instead of from the USGS seamless site
4087 9/6/2011–1/11/2012—Gridded gage coverage display issues
4157 9/22/2011–1/10/2012—Material not saved in "Land Poly Atts" window
4421 12/1/2011–1/9/2012—Date/Time Display on the Hydrograph Plot window
4494 12/15/2011–1/9/2012—WMS crashes while trying to read GSSHA solution
4501 12/19/2011–1/6/2012—Minor HY-8 tutorial issue
4431 12/6/2011–1/5/2012—Fix problem with WMS framing if you have an online map and you download a DEM from online data
4518 12/29/2011–1/5/2012—New Tool for contouring based on a selected area needs a name
4432 12/6/2011–1/5/2012—Add a forward and back view button to the WMS interface in the static tools, similar to the buttons in HydroDesktop
4528 1/3/2012–1/4/2012—Soil erosion parameters in cmt file is saved incorrectly
4433 12/6/2011–12/30/2011—Add an option to convert online images to a normal (static) image in the map module
4443 12/6/2011–12/14/2011—Add elevation data site to GSDA site
4434 12/6/2011–12/14/2011—Create a separate non-global-mapper interface for accessing online images
4451 12/6/2011–12/12/2011—Make the MODRAT renumber selection dialog modeless
4423 12/1/2011–12/9/2011—GSSHA Overland Boundary Condition
4199 10/5/2011–12/7/2011—Crop Collar and Uncrop Collar commands not active
4379 11/18/2011–12/7/2011—WMS crashes when tryring to crop the collar of an image
4446 12/6/2011–12/7/2011—Remove or fix Crop Collars in WMS (4 hours)
4086 9/6/2011–12/6/2011—NEXRAD MODClark Tutorial Issues
4139 9/16/2011–12/5/2011—Only one point shows up when loading WMS project with MODRAT model
4194 10/3/2011–12/2/2011—Contours for TIN-> DEM Conversion not displaying at all
4089 9/6/2011–12/1/2011—Hydrologic tree does not appear
4128 9/14/2011–12/1/2011—WMS crashes section 8.1 "Orange County Unit Hydrograph – GIS" tutorial.
4096 9/7/2011–11/30/2011—NSS not registered
4102 9/8/2011–11/30/2011—HEC-1 does not run after adding a diversion
4127 9/13/2011–11/30/2011—Mean basin slope not assigned for some equations in NSS
4071 9/1/2011–11/29/2011—WMS 8.4.21 crashes when trying to load GSSHA project file
4211 10/7/2011–11/29/2011—Crash when trying to load *.gdm file
4204 10/6/2011–11/29/2011—Crash when trying to smooth streams
4240 10/14/2011–11/28/2011—GSSHA crash when running long term richard's infiltration simulation
4225 10/12/2011–11/28/2011—Rewrite the code that displays the embankment cells in a GSSHA project
4198 10/5/2011–11/22/2011—Updates to the Data Calculator
4272 10/24/2011–11/11/2011—Time Series Editor
4271 10/24/2011–11/11/2011—Time Series Editor, Split time series for GSSHA
3638 6/7/2011–11/8/2011—Assertion when going to HY-12 Junction data
4057 8/29/2011–11/8/2011—Modifying soil input field in the MODRAT Job Control changes rain input field
3637 6/7/2011–11/8/2011—HY-12 Structure types are not sorted correctly for links
4161 9/23/2011–11/1/2011—MODRAT Tc values greater than 30 minutes capped at 30 minutes without a warning
4168 9/26/2011–10/31/2011—Problem with Use Thalweg Data command in the GSSHA Stream Profile Editor
4191 9/30/2011–10/31/2011—Input hydro graph loses data if has more than 300 time steps.
3977 8/12/2011–10/28/2011—Tc value does not appear where it should
3963 8/11/2011–10/27/2011—WMS crashes when I include pipe node in/out flow
4009 8/18/2011–10/26/2011—WMS crashes when clicking depth solution
4062 8/30/2011–10/26/2011—OC Rational Tutorial Won't Run
3697 6/22/2011–10/25/2011—WMS 8.4 does not save re-projection
3738 7/5/2011–10/24/2011—Window is not big enough for text
3978 8/12/2011–10/24/2011—Must save WMS project before calculating CN
4094 9/7/2011–10/21/2011—Uninstallation of WMS 8.4 does not work
3981 8/15/2011–10/21/2011—WMS 8.4.19 crashes in SMPDBK tutorial
4007 8/18/2011–10/20/2011—Crash when creating an arc attached to outlet
3644 6/9/2011–10/20/2011—Issue with storm/tile drains
3886 8/2/2011–10/14/2011—Rational solution not saved in EPA SWMM file unless certain contitions met
3889 8/2/2011–10/14/2011—Node and link elevations not saved in WMS
3912 8/8/2011–10/14/2011—WMS not saving invert elevations for SWMM interface.
3946 8/10/2011–10/14/2011—WMS not reading in Link and Node elevations or names from EPA SWMM file
3947 8/10/2011–10/14/2011—WMS not reading link and node names from xpSWMM file.
4205 10/6/2011–10/11/2011—Input hydro graph truncated for modrat simulation
4080 9/2/2011–10/3/2011—Problem with saving EPA-SWMM data
3648 6/9/2011–9/23/2011—WMS 8.4 crashes when you select Remove Flat Triangles
3680 6/16/2011–9/16/2011—include build number at end of WMS in "Help | About" dialog
3722 6/30/2011–9/15/2011—Updating Tutorial
3832 7/20/2011–9/15/2011—Map to Hydrologic Model option not working in Detention Basin Editor
4081 9/2/2011–9/14/2011—Changes to GSSHA .cmt file for WMS 9.0
3985 8/15/2011–9/12/2011—GSSHA calibration Parameter replacement issue
4035 8/25/2011–9/12/2011—Add the OVERLAND_BACKWATER card to the WMS GSSHA interface
4108 9/8/2011–9/9/2011—WMS becomes unresponsive when working with a CE-QUAL-W2 control file
3703 6/24/2011–9/7/2011—GSSHA modeling basics infiltration tutorial bug
3611 6/2/2011–9/6/2011—Add the GMS unit test debug dialog to shared code and share it with WMS
3403 4/13/2011–9/1/2011—Problem computing overbank flow when running GSSHA (likely a GSSHA bug or potential problem)
3671 6/15/2011–8/31/2011—Hydraulic Toolbox Tutorial quick fixes for Eric or Richard (2 hours)
3324 3/29/2011–8/31/2011—Problem with MODRAT Soil file definition
3601 6/1/2011–8/31/2011—Font settings lost on some display options in dev.
3481 5/4/2011–8/30/2011—Cropping collar using right click menu not working properly
2997 1/20/2011–8/30/2011—error about HEC programs during WMS 8.4 install
3569 5/25/2011–8/30/2011—MODRAT-GIS Tutorial Issues
3440 4/25/2011–8/29/2011—Review Spatial rainfall tutorials
3441 4/25/2011–8/29/2011—Review MODRAT tutorials
3378 4/6/2011–8/25/2011—Plots not showing up in OC rational method GIS tutorial
3414 4/18/2011–8/25/2011—Error when running OC Rational Tutorial
2805 11/19/2010–8/23/2011—Unable to write Area-Reduction Factor in GSSHA mapping table file
3402 4/12/2011–8/23/2011—Area reduction GSSHA table not included in WMS
3494 5/9/2011–8/23/2011—Could we add a new tool that would contour a given area?
3810 7/15/2011–8/22/2011—"Could not assign length and orientation" error when trying to "Get lengths and orientation of branch segments" in CE-QUAL-W2 tu
3249 3/15/2011–8/16/2011—Values multiplied by 3.28 when exporting a GeoTIFF
3895 8/3/2011–8/15/2011—CE-QUAL-W2 crashes when trying to import boundary conditions for a branch
3885 8/2/2011–8/15/2011—CE-QUAL-W2 crashes when trying to import a meteorological file
3813 7/15/2011–8/12/2011—Resizing WMS causing computer to freeze
3807 7/14/2011–8/12/2011—Crash when double clicking title bar
3803 7/13/2011–8/10/2011—Coordinate Conversion Crash
3796 7/12/2011–8/9/2011—See if 10-85 basin parameters are being transferred to the NSS database
3743 7/6/2011–8/4/2011—More HY-8 Wizard Tutorial Issues
3742 7/6/2011–8/4/2011—WMS crashes when doing DEM → Stream Arcs
3741 7/6/2011–8/4/2011—WMS freezes when delineating watershed in HY-8 wizard
3560 5/24/2011–8/4/2011—WMS 8.4 HSPF Bugs to fix (12 Hours)
3496 5/9/2011–8/3/2011—Clean up the hydraulic toolbox tutorial and put it online
3477 5/3/2011–8/1/2011—Extracting X-sections error if Elevation data is not selected
3478 5/3/2011–8/1/2011—Exporting KMZ vector file
3503 5/9/2011–7/28/2011—Export TIN-based filmloop to Google Earth
3497 5/9/2011–7/28/2011—Bugs that came up in the HY8 modeling wizard tutorial
3515 5/11/2011–7/27/2011—Not all soil types mapped to index map
3612 6/2/2011–7/26/2011—Add integration tests to WMS
3525 5/12/2011–7/25/2011—Error message while converting feature arcs to TIN
286 12/8/2008–7/20/2011—Rewrite Infiltration tutorial on www.gsshawiki.com
1511 10/12/2009–7/20/2011—New NSS databases not compatible with WMS 8.2
995 6/3/2009–7/20/2011—In the 2D Scatter Data tab of the Display Options dialog decimal Z magnifications are not currently supported.
3681 6/16/2011–7/18/2011—error when trying to install WMS 8.4.15 when WMS 8.4.14 is already installed
3675 6/15/2011–7/18/2011—SWMM tutorial not exporting flowrates
3678 6/16/2011–7/15/2011—SWMM Tutorial Bug: WMS not writing hydrograph information to EPA SWMM
3672 6/15/2011–7/14/2011—Bug in SWMM tutorial: area exported in sq. mi. even though computed in acres
3083 2/8/2011–7/14/2011—SWMM tutorial bugs
3588 5/31/2011–7/13/2011—Problems with Modified Puls xy series editor in HEC-HMS Parameters dialog
3366 4/5/2011–7/5/2011—Export a filmoop or KMZ from a TIN
1648 11/23/2009–7/5/2011—WMS runs out of memory when converting one TIN contour to feature objects.
2118 4/21/2010–7/5/2011—Clean→Snap Selected Nodes command gives you an hourglass instead of a select cursor
1708 12/16/2009–7/5/2011—WMS not Print Correctly
1496 10/7/2009–7/5/2011—Problem reading *.wpr or *.wms file with TIFF file
996 6/3/2009–7/5/2011—wmsnss.exe crash
865 4/28/2009–7/5/2011—Check to see if the fix for the single-basin at outlet problem has worked out in the dev version
3732 7/1/2011–7/5/2011—Freeze when trying to delineate a basin in WMS 8.4
3513 5/10/2011–6/30/2011—Crash or freeze when reading solution
3713 6/29/2011–6/29/2011—Problem saving HMS file
3531 5/13/2011–6/15/2011—WMS crash while converting DEM to TIM
3609 6/2/2011–6/7/2011—Issues with new combo boxes in Film Loop Setup
3590 5/31/2011–6/7/2011—Hydraulic Toolbox tutorial issue
3634 6/6/2011–6/7/2011—Problem filtering TIN
3492 5/9/2011–6/6/2011—Filtering angle option for TIN filtering not working properly
3404 4/13/2011–6/2/2011—Add a pre-link event to copy shapesdb.dat (used in HY8) to the 64-bit WMS folder (1 hour)
3431 4/25/2011–6/2/2011—Problem reading GSSHA project and GSSHA solution
3475 5/3/2011–6/1/2011—Model Check Error when doing GSSHA
3463 4/29/2011–5/31/2011—GSSHA card improperly written out in *.cif file
3396 4/11/2011–5/31/2011—Index maps do not display in GSSHA model
3397 4/11/2011–5/16/2011—GSSHA Film Loop
2550 9/7/2010–5/11/2011—Need to be able to assign land use IDs manually
3471 5/2/2011–5/3/2011—WMS crashes when opening hydrograph plot from palmer canyon GIS MODRAT model
3239 3/14/2011–5/2/2011—problem with base files in GSSHA tutorials
3240 3/14/2011–4/29/2011—GSSHA stops prematurely after adding a detention basin
3231 3/11/2011–4/21/2011—Problem with flow accumulations at depression points
3248 3/15/2011–4/20/2011—WMS 8.4 always says you're out of date
3261 3/17/2011–4/19/2011—Redo the way we handle stream and cell boundary conditions in GSSHA
3254 3/15/2011–4/19/2011—Error when selecting below last time step of GSSHA depth output
3348 3/31/2011–4/18/2011—Problem with downloading land use data (possibly other web services also)
3368 4/5/2011–4/14/2011—Bug in GSSHA Modeling Basics Infiltration tutorial (.cmt file problem--check)
3369 4/5/2011–4/13/2011—Bug in GSSHA - Modeling - Wizard tutorial-GSSHA model checker errors
3371 4/5/2011–4/13/2011—Problem with running GSSHA with wells and saving GSSHA well files
3372 4/5/2011–4/11/2011—crash when running GSSHA
3344 3/30/2011–4/6/2011—Minor Model check problem after opening existing project file
3296 3/24/2011–4/6/2011—WMS hangs when processing NEXRAD radar rainfall grids
3298 3/24/2011–4/6/2011—Fix all problems with importing and using radar rainfall grids
3365 4/5/2011–4/5/2011—Remove a the "Crop Image" page from the wiki
3295 3/24/2011–4/5/2011—Crash when reading GSSHA project with different size of grid cells than the .msk file in the index map
3338 3/30/2011–4/5/2011—Select a better default for computing gage weights
3337 3/30/2011–4/5/2011—Add a separate menu command to compute rainfall gage weights
3330 3/30/2011–4/4/2011—Basin Time Computation Method is not saved
3345 3/31/2011–4/4/2011—Problem with debris production estimates from MODRAT GIS Tutorial
3343 3/30/2011–4/1/2011—Percent Impervious not mapped correctly from shapefile data
3272 3/18/2011–3/22/2011—WMS basin boundaries not drawn completely in HEC-HMS (Willdan project)
3157 2/22/2011–3/17/2011—Collar not cropped completely
2992 1/20/2011–3/17/2011—WMS freezes when mapping to 1D schematic
2993 1/20/2011–3/17/2011—WMS 8.4 freezes when trying to load a wms project file
3255 3/16/2011–3/16/2011—WMS 8.4 installs HEC-RAS 4.1, but tries to launch 4.0
3016 1/26/2011–3/16/2011—"Error reading scalar binary file, (floatarray)" appears when loading GSSHA depth solution
3018 1/27/2011–3/15/2011—Second window appears after importing HEC-RAS GIS file
2051 4/6/2010–3/15/2011—WMS crashes when trying to open RainGageBug.wms
3019 1/27/2011–3/15/2011—Importing .cmt file into GSSHA Map Table Editor does not work
3205 3/3/2011–3/15/2011—Problem with HMS diversions in Willdan project
3014 1/26/2011–3/14/2011—Problem with trying to read SCS default rainfall distributions when a different version of WMS is installed then uninstalled
2991 1/20/2011–3/14/2011—error message each time opening WMS 8.4 64-bit
2903 12/22/2010–3/14/2011—Loading Projection file
2900 12/21/2010–3/14/2011—Crash when generating a GSSHA grid
3204 3/3/2011–3/11/2011—WMS not saving "description" field in HMS interface
3198 3/1/2011–3/11/2011—% Impervious not displaying properly while Computing GIS Attributes
3180 2/28/2011–3/11/2011—Basin Time Computation for HEC-HMS
3079 2/8/2011–3/10/2011—TauDEM not working with depression points
3215 3/7/2011–3/10/2011—Confusing error message when network lock has problems
3197 3/1/2011–3/9/2011—Missing parameter in HEC-HMS Properties dialog
3194 3/1/2011–3/9/2011—Problem with using the hydraulic toolbox in the WMS HY8 modeling wizard
3073 2/4/2011–3/8/2011—HY-8 Wizard bugs
3195 3/1/2011–3/8/2011—Cancel on the Hydraulic Toolbox Storage capacity input dialog does not work
2921 1/5/2011–2/25/2011—Creating soil type coverage manually for use with GSSHA is problematic
3074 2/4/2011–2/25/2011—crash when delineating inundated area in HY-8 wizard
2976 1/18/2011–2/8/2011—NSS not functional in WMS 8.4

Release 8.4/Intermediate Release WMS 8.4.9 – February 3, 2011

An update to WMS 8.4 has been posted on Aquaveo's web site. The final version of WMS 8.4 was also released in December 2010. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/. The following known bugs have been fixed in this version:

Bug ID-Date Submitted—Updated-Summary

3049 1/31/2011–2/1/2011—error when converting NEXRAD data to *.dss
2681 10/15/2010–1/24/2011—Problem reading GSSHA sediment files
2680 10/15/2010–1/24/2011—Problem with reading/saving GSSHA contaminant file from WMS
2707 10/25/2010–1/20/2011—printed scale bar display error
2682 10/15/2010–1/20/2011—Problem writing GSSHA project file with overland flow boundary condition
2292 6/3/2010–1/20/2011—RAS import causing Issues
2505 8/17/2010v1/18/2011—Problem reading HEC-1 file and writing it as an HMS file
2665 10/11/2010–1/10/2011—DEM→Stream Arcs command not working for certain projects
2922 1/5/2011–1/7/2011—WMS 8.4 crashes when loading Willdan .asc dem files as a group
2549 9/7/2010–1/4/2011—WMS doesn't recognize all basins created w/ feature objects
2511 8/20/2010–11/3/2010—WMS HANGS when deleting arc
2624 10/4/2010–11/2/2010—Modrat Wrapper not finishing
2623 10/1/2010–11/2/2010—Joining SSURGO data bug
2565 9/9/2010–11/2/2010—Click on GSSHA Smooth Stream Dialog causes a crash
2400 7/12/2010–10/28/2010—Build Polygons Crash
2389 7/7/2010–10/28/2010—WMS 8.3 unable to Connect to Sever when selecting from web service
2629 10/5/2010–10/27/2010—WMS cannot load images after converting DEM to TIN
2436 7/21/2010–10/27/2010—WMS crashing when loading GIS data
2359 6/29/2010–10/27/2010—WMS 8.3 Crashing when loading Raster
2627 10/5/2010–10/25/2010—Severe WMS/Global Mapper bug when converting DEM to TIN
2597 9/23/2010–10/25/2010—When loading the hydrograph solution to HEC-1 WMS Gives an error
2508 8/19/2010–10/22/2010—WMS 84 can't load existing GSSHA model.
2546 9/7/2010–10/20/2010—WMS Clean tool gives an hourglass instead of an arrow cursor
2332 6/16/2010–7/19/2010—problems numbering Branch
2321 6/11/2010–7/16/2010—Run GSSHA model button in the Hydrologic modeling wizard not working
2311 6/9/2010–7/16/2010—Contour Options button not working
2288 6/2/2010–7/16/2010—Hydrologic modeling wizard Define project boundary
2244 5/24/2010–7/16/2010—flow vectors don't read in
2239 5/20/2010–7/16/2010—Save File button not working in Coverage Overlay dialog
2366 6/30/2010–7/15/2010—Display options
2184 5/5/2010–7/14/2010—Tutorial change request
2217 5/13/2010–7/13/2010—WMS not writing all lakes to file
2215 5/13/2010–7/13/2010—Simple dam Break not finding Cross Section
2237 5/20/2010–7/12/2010—Add the START_TIME and END_TIME cards to writing the GSSHA Project file and have fields for these cards in the GSSHA Job Control
2108 4/19/2010–7/8/2010—Changed the elevations of a few cross sections to get rid of pooling and then tried to rerun HECRAS but it wouldn't run because
2089 4/16/2010–7/8/2010—Cross sections Missing
2236 5/20/2010–7/2/2010—Crash when deleting GSSHA model
2234 5/19/2010–6/10/2010—Add option to select whether to export contaminant mass and concentration to GSSHA output control
2156 4/28/2010–6/10/2010—Error in GSSHA Calibratiobn
2153 4/28/2010–6/10/2010—GSSHA calibration output files
2060 4/8/2010–6/10/2010—Allow editing polygon-selected index map ID's in the properties window
2247 5/25/2010–6/9/2010—Add GSSHA Calibration Parameters in WMS
2235 5/19/2010–6/9/2010—Report the name of the contaminant when reading the contaminant transport solution
2249 5/25/2010–6/8/2010—Check while reading parameter and calibration file in GSSHA automated calibration
2248 5/25/2010–6/8/2010—WMS does not read observed data file
2075 4/12/2010–5/18/2010—"Error message when trying to open an image: ""The application has failed to start because gmp-vc90-mt.dll was not found"""
2065 4/9/2010–5/18/2010—"The ""Select Shapes Tool"" in the GIS module should be an active tool but it is inactive."
2141 4/26/2010–5/14/2010—WMS crashes when right clicking on a TIN Tree Item for a TIN that's been deleted
2147 4/28/2010–5/13/2010—Error reading GSSHA Stochastic Simulation results
2183 5/4/2010–5/12/2010—Save GSSHA Group Dialog
2151 4/28/2010–5/12/2010—Issues with GSSHA Automated Calibration
2175 5/3/2010–5/11/2010—converting dem contours to feature objects
2143 4/26/2010–5/11/2010—Multi-Select index map grid cells
1761 1/8/2010–4/19/2010—Louisiana SSURGO files will not download from Web Services
1753 1/5/2010–4/19/2010—Opening this GSSHA project file causes WMS 8.3 to crash
1754 1/6/2010–4/16/2010—WMS crashes when opening any GSSHA project with the attached *.ini file
2020 3/29/2010–4/14/2010—Problem converting shapefile contour lines to feature objects (and then to elevations on a TIN)

Other fixes and updates

Fixed MODRAT/WMS bugs
Rewrite all recursive functions associated with basin delineation and basin data computation
Add parameters toggle in Soil Type/Land Use attributes dialog for Initial and Constant, and add attribute for Initial Loss (in) and Constant Infiltration Rate (in/hr)
Automatically transfer Initial and Constant values to appropriate loss fields in HMS properties dialog (may require adding Initial Loss, Constant Infiltration Rate, and Percent Impervious to list of Basin data parameters)
Change "Compute Basin Data" function to only compute selected basin data parameters (may significantly reduce computation time for large datasets)
Modify HMS temporal distribution dialog to use more than 300 points

Intermediate Release WMS 8.3.4 – June 7, 2010

An update to WMS 8.3 has been posted on Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/. The following known bugs have been fixed in this version:

Bug Id Date Submitted—Updated-Summary

2071 4/12/2010–5/18/2010—Zoom tool not working in Edit DEM Elevations plot window
2084 4/14/2010–5/17/2010—DEM File won't read in
2038 4/1/2010–4/14/2010—Placing a contour label causes WMS 8.3 to crash

Intermediate Release WMS 8.3.3 – March 19, 2010

An update to WMS 8.3 has been posted on Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/. The following known bugs have been fixed in this version:

Bug Id Date Submitted—Updated-Summary

1860 2/4/2010–3/11/2010—Floating point error when running SMPDBK
1919 2/26/2010–3/11/2010—Loading dem changes Current Coordinates.
1944 3/3/2010–3/10/2010—Option to manually link nodes and outlets in SWMM does not work
1958 3/4/2010–3/10/2010—"When selecting the basin icon in the NSS model (tutorial volume 2, ch3), WMS gives error window"
1824 1/25/2010–3/9/2010—Floodplain delineation freeze
1825 1/25/2010–3/9/2010—Opening these DEMs with Current Coordinates set to State Plane causes WMS to crash

Release 8.3.0/Intermediate Release WMS 8.3.1 – January 26, 2010

An update to WMS 8.3 has been posted on Aquaveo's web site. The final version of WMS 8.3 was also released in December. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/. The following known bugs have been fixed in this version:

Bug Id Date Submitted—Updated-Summary

1762 1/8/2010–1/21/2010—"Change ""Join SSURGO data"" command to ""Join NRCS data"""
1731 12/22/2009–1/21/2010—GSSHA cross section data not saved.
1755 1/6/2010–1/20/2010—WMS 8.3 does not read in GSSHA custom cross-section data
1609 11/6/2009–1/14/2010—WMS coverages not overlaying DEM properly in WMS 8.3
1650 11/23/2009–1/13/2010—Converting TIN Contour to Feature Objects not working from menu
1664 12/1/2009–1/12/2010—WMS crashes upon opening the .wms file included in bug #1531
888 5/4/2009–12/3/2009—WMS 8.2 gets hung when trying to run on a computer with low resolution
1642 11/19/2009–12/3/2009—Bug when displaying GIS data using ArcObjects in Albers coordinate system
863 4/28/2009–11/19/2009—Problem reading land use ArcGrid with ArcObjects
1035 6/15/2009–11/18/2009—Save files to temporary directory/filename before writing over original file
1614 11/9/2009–11/18/2009—Map Data option for computing lag time in HEC-HMS doesn't transfer computed value
1621 11/12/2009–11/18/2009—HMS Lag time for computing Clark's R doesn't update when edited manually
1618 11/11/2009–11/11/2009—Button for Defining Inflow-Diverted flow in HMS Interface not working
1615 11/9/2009–11/10/2009—WMS crashes when exporting scatter data to ASCII grid file
1617 11/10/2009–11/10/2009—Basin area units wrong in HMS if computing basin data in acres
1612 11/9/2009–11/9/2009—WMS giving the wrong Values in the ENDFILES
1610 11/6/2009–11/9/2009—Land use shapefile descriptions not mapped to Level2
1251 7/31/2009–11/9/2009—Let users change rain gage display
450 1/15/2009–11/9/2009—WMS deletes TIN vertices and triangles when closing a project
271 12/2/2008–11/9/2009—Cancel button does not work on the web services dialog
237 11/19/2008–11/9/2009—Display doesn't refresh while dragging vertices
1597 11/3/2009–11/9/2009—WMS Crash
640 2/27/2009–11/5/2009—"Remove toggle box in CAD Data Display Options dialog – if not the whole dialog"
1559 10/21/2009–10/30/2009—WMS title bar modification to facilitate testing of the 'release' version and elimination of the 'release robot' version
1588 10/30/2009–10/30/2009—Problem with Extract Cross Sections dialog
316 12/12/2008–10/30/2009—Detention basin overflowed error when running the Rational Method
227 11/13/2008–10/30/2009—Display CAD data command does not turn CAD display off when toggled off
226 11/13/2008–10/30/2009—CAD Layers coverages are not highlighted when they are set as the active coverage
837 4/22/2009–10/29/2009—Why is the terraserver map scale dialog so big?
284 12/8/2008–10/29/2009—Remove CROSS_SECTION_LIST card from GSSHA files that WMS writes
415 1/8/2009–10/29/2009—"Upon Clicking ""Delineate Watershed"" ( Tutorials, Vol II, Ch 5, Sec 5.2.7) the file name is omitted from the title bar."
1577 10/28/2009–10/28/2009—Default feature arc attribute not stored for 1D Hydraulic Centerline coverage
1572 10/26/2009–10/28/2009—"Section 2.3.1, Volume 2, Chapter 2, Step 11"
332 12/17/2008–10/28/2009—Properties window display bug
188 11/6/2008–10/28/2009—Error reading shapefiles with associated .prj files
178 11/4/2008–10/28/2009—Map data is hidden behind the 2D Grid when color filled contours are turned on in plan view
177 11/4/2008–10/28/2009—Problem displaying 2D Grid flow vectors with blocked cells and color filled contours.
851 4/24/2009–10/28/2009—"Sub-basins improperly delineated. Zero area error. Orange County Tutorial 6, section 6.3.2."
1481 10/2/2009–10/26/2009—WMS crashes when treating generic polygons as basins.
1568 10/23/2009–10/26/2009—MODRAT dialog warning of duplicate names when no duplicate names exist
1517 10/13/2009–10/26/2009—Problem with moving GSSHA projects to a different directory
832 4/21/2009–10/23/2009—Problem with sub-basin areas
1469 9/30/2009–10/20/2009—HEC-1 Data Points
1438 9/19/2009–10/19/2009—"Upon completion of Step 12, Section 3.4, Volume 6, the .wms or .wpr is dropped from the file name in the title bar."
822 4/17/2009–10/16/2009—Generate IDs button never undims when entering Infiltration after Initial Moisture
1535 10/16/2009–10/16/2009—WMS doesn't recognize drainage basin
107 10/9/2008–10/16/2009—Incorrect prompt shown
1531 10/15/2009–10/15/2009—Rain gage weights don't add up to one
666 3/6/2009–10/15/2009—Contour Options dialog spreadsheet problems
1488 10/6/2009–10/15/2009—Contour intervals incorrect when using specified values and then switching to color fill
358 12/23/2008–10/14/2009—Save button in Project Filename page of Hydrologic Modeling Wizard overwrites existing files
106 10/9/2008–10/14/2009—Hourglass not shown while deleting tin verts
485 1/22/2009–10/13/2009—Problem when trying to indicate the location of WinHspfLt.exe
314 12/12/2008–10/13/2009—Legend text in hydrograph plot for Rational method hydrographs
219 11/12/2008–10/13/2009—Edit | Preferences window needs some tweaking
789 4/3/2009–10/13/2009—Can't access drainage data display options
480 1/21/2009–10/12/2009—Forum feature request: saving depression points
140 10/24/2008–10/12/2009—Ghost Outlet Bug: WMS selects an imaginary outlet when selecting an outlet in the Map Module in 8.1
451 1/15/2009–10/9/2009—WMS vanishes when working with a project with a deep file directory
1472 9/30/2009–10/8/2009—MODRAT import Issue
426 1/13/2009–10/7/2009—Saving image registration (world file) with xmdf project file
398 1/7/2009–10/7/2009—Saving image registration data with .wms (xmdf) file
1470 9/30/2009–10/7/2009—MODRAT Output Error
1250 7/31/2009–10/7/2009—WMS crashes when converting a DTED DEM to a TIN and toggling the TIN display on and off
836 4/22/2009–10/7/2009—State plane zone description not showing in shared projection dialog
862 4/28/2009–10/7/2009—Another problem displaying image with ArcObjects enabled
245 11/21/2008–10/7/2009—Cross section not displayed in channel calculator
439 1/13/2009–10/7/2009—Duplicating a coverage takes a long time
438 1/13/2009–10/7/2009—Changing coverage name in the Coverage Properties dialog takes a long time
165 10/30/2008–10/6/2009—Rain Gage coverage should have Map data display attributes
168 10/30/2008–10/6/2009—Legend gets stuck on WMS Screen when Selecting File | New
433 1/13/2009–10/6/2009—Mapping shapefile to feature obejcts crash
361 12/29/2008–10/6/2009—Problem with images on xmswiki.com
1457 9/25/2009–10/6/2009—Crash when running OC rational
357 12/23/2008–10/6/2009—DEM point selection tool slow selecting a DEM point
1471 9/30/2009–10/6/2009—Adding stream arc crashes project
315 12/12/2008–10/6/2009—Delete button in the Elevation Discharge Input dialog does not work
301 12/9/2008–10/6/2009—Selecting a segment in the CE-QUAL-W2 Polygon Segment Attributes dialog does not select a segment in the graphics window
1485 10/5/2009–10/6/2009—WMS vanishes when opening this GSSHA project from the wiki tutorials
206 11/11/2008–10/5/2009—Remove Flat triangles does not work in WMS 8.2
449 1/15/2009–10/5/2009—TIN and map file do not overlay properly in WMS 8.1
179 11/4/2008–10/5/2009—Problem displaying 2D grid cell elevations with color filled contours
916 5/7/2009–10/5/2009—Display issue with reading map file
116 10/16/2008–10/5/2009—Web Services options that don't work should be dimmed out
130 10/21/2008–10/5/2009—Errors when running through CE-QUAL tutorial in WMS 9.0
1242 7/30/2009–10/2/2009—NSS will not load without write access to Program Files directory
157 10/29/2008–10/2/2009—Pattern palette not working in WMS 8.1
101 10/7/2008–10/2/2009—2D Grid Flow Vectors drawn on same layer as Color Filled Contours
1473 9/30/2009–10/2/2009—NSS calculation possible error
1271 8/6/2009–9/30/2009—WMS crashes when creating a filmloop of a partial solution
1594 10/31/2009–11/4/2009—Vol 3, Ch4, Section 4.3.2, Step 2. Strange symbols appear in list box.
1578 10/28/2009–11/4/2009—Multiple arcs should only have one attribute if connected

Intermediate Release WMS 8.2.6 – September 22, 2009

An update to WMS 8.2 has been posted on Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/. The following known bugs have been fixed in this version:

Bug Id Date Submitted-Updated—Summary

170 10/31/2008–9/21/2009—Bug when opening a WMS project from spatial tutorials
999 6/3/2009–9/21/2009—Error message occasionally pops up while moving through sediment flux or stream sediment flux dataset.
898 5/5/2009–9/21/2009—WMS crashes when running Clean Up Model command on this project
860 4/28/2009–9/21/2009—Problem reading TIFF image using File | Open command
852 4/27/2009–9/21/2009—Upon completion of the Volume VI - Chapter 6 tutorial, Section 6.2, Step 13 WMS crashes.
1391 9/8/2009–9/21/2009—GSSHA datasets don't match up with hydrographs
360 12/23/2008–9/18/2009—Default DEM display point size
464 1/19/2009–9/18/2009—Switching to Specified Values in Contour Options does not enable Value fields
648 3/4/2009–9/18/2009—Remove reservoir display opts from the TIN drainage display tab
283 12/6/2008–9/18/2009—Error message, Vol. V, Ch. 1, Section 1.2, step 24, "An unsupported operation was attempted."
192 11/7/2008–9/18/2009—Bug when specifying a bias when creating a 2D grid
171 10/31/2008–9/18/2009—Tc value not updating in ModClark tutorial
105 10/9/2008–9/17/2009—DrawBuffer_enum GetDrawBuffer () Assertion
100 10/7/2008–9/17/2009—WMS exports the canvas window background when saving a *.kmz film loop
989 6/1/2009–9/17/2009—WMS crashes when running DEM->Stream Arcs command
1199 7/20/2009–9/17/2009—WMS does not write out projection file when exporting grids from GSSHA output datasets
277 12/4/2008–9/17/2009—Changes to GSSHA .cmt file requested by Chuck
1270 8/6/2009–9/11/2009—Embankment arcs should not extend into inactive GSSHA cells or else GSSHA won't run
1275 8/10/2009–9/11/2009—WMS does not read in more than 5, or 6 files into the "Convert Grids" dialog at a time.
1286 8/12/2009–9/11/2009—In job control dialog,contaminant name and location are lost when you add a new contaminant
1340 8/24/2009–9/10/2009—GSSHA sample tutorial crashes WMS
1341 8/24/2009–9/10/2009—GSSHA doesn't save *.dep and *.ghm file when you choose to save before running
1343 8/24/2009–9/10/2009—Basin data not read from file
1389 9/3/2009–9/9/2009—WMS crashes when conforming GSSHA embankment arc to grid if no grid is available
1068 6/23/2009–9/2/2009—Hydrograph output toggle in GSSHA solution results window not used, misleading
1204 7/21/2009–8/17/2009—WMS Crashes upon completion of Step 12, Section 4.2, in the Volume 6, Chapter 3 tutorial.
1170 7/15/2009–8/17/2009—Problem with either GSSHA or WMS-reading a GSSHA solution file
1215 7/23/2009–8/11/2009—A dialog reading "There was an error reading record 1 in the Green-Ampt Land Use Table" cannot be dismissed.
1051 6/17/2009–8/10/2009—DEM Contours written to KMZ file, when DEM is turned off
1173 7/15/2009–8/10/2009—WMS crashes upon clicking the 'Assign' buttton during step 12, section 1.4, of the Volume 5, Chapter 1 – HSPF tutorial.
1240 7/30/2009–8/7/2009—Save File command in coverage overlay window should show default file types
1241 7/30/2009–8/7/2009—WMS crashes when delineating a watershed before running TOPAZ
1138 7/10/2009–8/6/2009—Volume 3, Chapter 2 – Floodplain Delineation, csdb.idx file not found when saving *.wms file at the end.
1252 7/31/2009–8/6/2009—Bug when reading in rain gages from format precip macro
1188 7/16/2009–8/6/2009—The attached WMS.ini file causes WMS to crash when loading DEMs
1002 6/3/2009–7/16/2009—HEC-1 lag time/time of concentration data computed
997 6/3/2009–7/15/2009—SSURGO Shape files Bug
1000 6/3/2009–7/15/2009—WMS crashes during the creation of an animation using the sediment flux and stream sediment flux data sets.
1141 7/10/2009–7/10/2009—Bug in assigning texture using Join SSURGO command.
1143 7/10/2009–7/10/2009—In WMS dev, the ksat algorithm in the Join SSURGO data command occasionally returns "-1.#IND00"
1144 7/10/2009–7/10/2009—Bug in Joining SSURGO data KSAT values in WMS dev
1145 7/10/2009–7/10/2009—resistance equation in Join SSURGO dialog should be changed to "equivalent conductance equation"
919 5/7/2009–7/10/2009—WMS disappears when running DEM->Stream Arcs command on this DEM
1004 6/4/2009–7/9/2009—GSSHA simulations including erosion and sediment only read in the first sediment from the .sed file into WMS.
903 5/6/2009–7/9/2009—Tutorials, Volume V, Chapter 2, Section 2.6.2, Step 2.
1066 6/22/2009–7/8/2009—CAD layers do not disable properly in the tree view
1007 6/5/2009–7/6/2009—TerraServer generates an error upon completion of step 23, Section 2.7.2, of the Chapter 2, Volume 1 Tutorial.
899 5/5/2009–7/1/2009—GSSHA hyetograph ranamed as "Hyetograph" in XY Series Editor
909 5/6/2009–6/30/2009—spreadsheet entries in GSSHA Solution Analysis dialog dimmed for no good reason
1083 6/26/2009–6/30/2009—GSSHA calibration mode results different when using different units
901 5/6/2009–6/30/2009—Tutorials, Volume IV, Chapter 3, Section 3.5 - After finishing the tutorial WMS crashes while saving finished project file.
906 5/6/2009–6/29/2009—GSSHA Outlfow hydrograph not matching stream flow graph in solution results window

Intermediate Release WMS 8.2.2 – June 23, 2009

An update to WMS 8.2 has been posted on Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/. The following known bugs have been fixed in this version:

Bug Id Date Submitted—Updated-Summary

897 5/5/2009–6/15/2009—WMS crashes when deleting the GSSHA cumulative rainfall dataset from the project explorer
902 5/6/2009–6/15/2009—MODRAT "Use Input Hydrograph" option doesn't work
905 5/6/2009–6/12/2009—XY Series editor "show dates" option prompts for a reference date but doesn't use it
908 5/6/2009–6/12/2009—WMS does not read the attached xy series file (even though it was created in WMS)
924 5/11/2009–6/5/2009—WMS crashes when running model checker on the attached GSSHA model
988 6/1/2009–6/5/2009—WMS crashes when importing these TOPAZ files
952 5/18/2009–6/5/2009—WMS Crashes on Check Model command in GSSHA
781 4/2/2009–6/5/2009—SURRGO Soils data not transferred to GSSHA index maps
782 4/2/2009–6/5/2009—No units shown for joined SURRGO soils data
896 5/5/2009–6/4/2009—infinite loop while trying to read prj file instead group project file
998 6/3/2009–6/4/2009vRead project file crash
808 4/10/2009–5/15/2009—GSSHA stops running after running the second hour of the attached 5-hour simulation
849 4/24/2009–5/15/2009—WMS crashes when importing this GIS (.geo) file
853 4/27/2009–5/14/2009—Problem reading or writing scalar data to or from 2D scattered data
926 5/11/2009–5/13/2009—GSSHA crashes when trying to run the attached model
775 4/2/2009–5/7/2009—GSSHA crashes when using lakes
786 4/2/2009–5/6/2009—Prompt needed for users to switch model units from feet to meters if using GSSHA
586 2/14/2009–5/6/2009—Title in the WMS 8.2 title bar needs to be cleaned up.
309 12/11/2008–5/5/2009—GSSHA does not recognize wetlands (*.wlm) file when spaces are in the file path

Intermediate Release WMS 8.2.1 – May 4, 2009

An update to WMS 8.2 has been posted on Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/. The following known bugs have been fixed in this version:

Bug Id Date Submitted—Updated-Summary

659 3/5/2009–5/1/2009—WMS crashes when running MODRAT with no file prefix
698 3/16/2009–5/1/2009—MODRAT Error
783 4/2/2009–5/1/2009—No feedback for MODRAT run – Randall Greenwood
511 1/29/2009–5/1/2009—Deleted 1D-Hyd Cross-Section Arcs reappear when reopening WMS project
200 11/10/2008–4/30/2009—WMS crashes when opening CAD file with image file (*.sid) loaded
758 3/27/2009–4/29/2009—Better reading and processing needed for NLCD 2001 Land Use grids
700 3/16/2009–4/28/2009—Problem with tying stream arcs to sub-basins
633 2/27/2009–4/28/2009—WMS RASTER import Crash
757 3/27/2009–4/28/2009—WMS crashes when importing an ArcGrid with ArcObjects enabled in WMS 8.1
778 4/2/2009–4/27/2009—Selecting Redistribute Vertices command without a selected arc launches an unnecessary dialog
671 3/10/2009–4/27/2009—2-D Scatter Dataset Not Created
665 3/6/2009–4/27/2009—Problem with saving/reading datasets associated with TINs
662 3/5/2009–4/23/2009—WMS 8.2 Crashes upon completion of Section 3.5, step 6 of the Volume IV, Chapter 3 tutorial.
667 3/7/2009–4/23/2009—WMS 8.1 Disappears upon completion of step 9 of GSSHA Tutorials:3 Fixing Digital Dams
436 1/13/2009–4/23/2009—WMS loses basin data reading in a project file
432 1/13/2009–4/22/2009—Problems with coverage att tables when closing WMS
702 3/16/2009–4/21/2009—Need input value length restrictions on MODRAT input values in Edit Parameters window
660 3/5/2009–4/21/2009—WMS crashes when using Flood menu options with nothing loaded
741 3/24/2009–4/20/2009—WMS 8.2 Crashes when reading in NSSmap_FL.map, step 2, section 7.4.1 of the Volume II, Chapter 7 tutorial. NSS Interface.
717 3/18/2009–4/20/2009—Compute Basin Data Crash!
110 10/9/2008–4/20/2009—Crash when going to global mapper dialog
817 4/16/2009–4/16/2009—Opening this project file causes WMS to crash
608 2/24/2009–4/14/2009—File path to LA County soils table needs to be updated in WMS 8.2 Preferences
780 4/2/2009–4/14/2009—Problem when using hyetograph precip option with GSSHA
764 3/30/2009–4/13/2009—Can't create filmloops
610 2/25/2009–4/13/2009—WMS disppears when trying to open an HY-8 culvert project
755 3/26/2009–4/13/2009—Problem converting coordinates when you download shapefiles with defined projection from web services
784 4/2/2009–4/10/2009—Misleading text on button in GSSHA Maps dialog
295 12/9/2008–4/10/2009—GSSHA 4.0 crashes in Tutorial 6.4
704 3/16/2009–4/10/2009—WMS 8.2 Web services dialog does not appear if not connected to the internet
703 3/16/2009–4/10/2009—Web service problem when downloading Louisiana data (and possibly data from other states)
751 3/25/2009–4/10/2009—The option to convert two shapefiles of the same type to a single coverage is not available
701 3/16/2009–4/7/2009—Problem with default Z units when converting NED DEM
746 3/25/2009–4/7/2009—Problem converting coordinates with shapefile
747 3/25/2009–4/7/2009—Problem converting coordinates with land use shapefile (no projection file)
748 3/25/2009–4/7/2009—Problem with vertical units when reading a DEM file
749 3/25/2009–4/6/2009—Problem setting and converting coordinates on a shapefile with a projection file
750 3/25/2009–4/6/2009—Problem converting shapefiles with projections in the hydrologic modeling wizard
692 3/12/2009–4/3/2009—Embankment Arc Profile Editor does not seem to update the endpoint elevations in the GSSHA-7 Tutorial.
189 11/7/2008–4/3/2009—WMS crashes in Grid Ooptions dialog (display x-y axis)
697 3/16/2009–4/2/2009—DEMEdit tutorial files not included in WMS 8.1 installation
616 2/25/2009–4/2/2009—WMS window goes blank when deleting drainage data with Select Feature Objects tool
448 1/15/2009–4/2/2009—Crash when opening *.map file on a TIN in WMS 8.1 and 8.2
522 2/3/2009–4/1/2009—Color fill contours not displayed for flood delineation
538 2/6/2009–3/31/2009—Delineate Basins Wizard stream display threshold units
337 12/18/2008–3/31/2009—Update Delineate Basins Wizard
507 1/29/2009–3/30/2009—Duplicate arcs being generated from 1D-Hyd Cross-Section coverage when exporting GIS file
477 1/21/2009–3/27/2009—River Hydraulic Schematic should be deleted when XSection and Centerline coverages get deleted
499 1/28/2009–3/27/2009—WMS not responding when accessing NED Data through Web Services if WebServices.exe is missing
508 1/29/2009–3/26/2009—Allow the option to download and read SSURGO data files for multiple SSURGO soil shapefiles
510 1/29/2009–3/25/2009—Allow users to select more than one soil type and/or land use shapefile for the Define Land Use and Soil Data step in the HMW
611 2/25/2009–3/23/2009—Web Services reports two errors when trying to save to an unexisting directory
547 2/6/2009–3/23/2009—Verify GSSHA embankment arc conceptualization
655 3/4/2009–3/19/2009—Land use and soil shapefile options not saved
656 3/4/2009–3/19/2009—Selected web catalog web service options (land use and soil) are not saved in the hydrologic modeling wizard
657 3/4/2009–3/19/2009—Terraserver web service resolutions are not used in the hydrologic modeling wizard
474 1/21/2009–3/19/2009—Save prompt is supressed after saving as .dwg, .dxf, .shp, or any other file type
658 3/4/2009–3/18/2009—Better handling of web service file names in the hydrologic modeling wizard
634 2/27/2009–3/18/2009—CE-QUAL-W2 bathymetry bug
303 12/10/2008–3/16/2009—Problem color filling contours
497 1/27/2009–3/12/2009—WMS crashes when re-entering the HY-8 Culvert dialog
614 2/25/2009–3/10/2009—WMS crashes when deleting a MODRAT diversion from a basin in WMS 8.1 and 8.2
532 2/5/2009–3/10/2009—Bug when setting bank arc attribute
641 2/27/2009–3/10/2009—Change default output in MODRAT Edit Parameters window
654 3/4/2009–3/10/2009—Problem creating uniform index map in WMS 8.1
650 3/4/2009–3/9/2009—DEM properties dialog
584 2/13/2009–3/9/2009—Next Hydrograph Station-> button in HEC-1 Parameters dialog causes WMS to crash
615 2/25/2009–3/9/2009—Add Retrieve Diversion command to right click menu in MODRAT
653 3/4/2009–3/9/2009—TR-20 CN entry

Release WMS 8.2.0 – April 16, 2009

WMS 8.2 has been released. This is the final release version. Bug fixes to WMS 8.2 will be posted in future updates.

Intermediate release WMS 8.2.1 (beta) – March 9, 2009

An update to WMS 8.2 Beta has been posted to the xmswiki.com web site. The main purpose of this update was to fix a problem with the WMS 8.2 beta version not working with WMS 8.1 hardware locks. The best place to obtain the update is from the WMS 8.2 beta download page on the xmswiki.com web site. The following known bugs have been fixed in this version:

Bug Id-Date Submitted-Updated-Summary

None 12/6/2009–12/6/2009—Fixed a problem with WMS 8.2 not working with WMS 8.1 hardware locks
272 12/2/2008–3/6/2009—WMS writes out MODRAT basin numbers incorrectly
465 1/19/2009–3/6/2009—WMS crashes when color fill contouring one contour
649 3/4/2009–3/5/2009—WMS crashes when converted TIN to DEM
548 2/6/2009–3/5/2009—Crash converting TIN to DEM without triangulating TIN
645 3/3/2009–3/5/2009—WMS 8.1 Bug – Saving as *.sup or *.shp file

Intermediate release WMS 8.1.6 – March 4, 2009

An update to WMS 8.1 has been posted to Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/. The following known bugs have been fixed in this version:

Bug Id Date Submitted—Updated-Summary

737 12/8/2008–3/4/2009—Base Flow Parameters in HEC-1 not written properly to HEC-HMS
341 12/19/2008–3/2/2009—TIN triangulation and display bugs in WMS 8.1 and WMS 8.2
435 1/13/2009–2/26/2009—SWMM hydraulic schematic data not written to *.wpr or *.wms (xmdf) project files
498 1/27/2009–2/26/2009—Crash when reading project file into WMS 8.2
431 1/13/2009–2/25/2009—SMPDBK parameters not saved to *.wms (xmdf) project file
282 12/5/2008–2/23/2009—Convert DEM to TIN crash
147 10/27/2008–2/19/2009—"DEM Contours, Color Filled Polygons, and DEM Streams share same draw space in WMS 8.1"
761 12/8/2008–2/19/2009—Reading the attached DEM files causes WMS to crash
294 12/9/2008–2/18/2009—Film Loop issues in Tutorial 6.3 and 6.4
762 12/8/2008–2/18/2009—WMS has problems reading the attached BIL files
553 2/9/2009–2/17/2009—Flood depth coverage doesn't accept user defined depth intervals
234 11/18/2008–2/16/2009—"WMS disappears when opening the project file at the beginning of the Volume VI, Chapter 4 tutorial."
261 11/26/2008–2/16/2009—"WMS 8.1 disappears upon completion of step 10, of the 5th tutorial on the gsshawiki."
262 11/26/2008–2/16/2009—WMS 8.1 Disappears upon completion of step 3 of Tutorials:7 Break-point Cross Sections on the GSSHA wiki.
308 12/11/2008–2/16/2009—Error Displaying Shapefiles
336 12/17/2008–2/16/2009—"WMS 8.2 Vanishes upon completion of step 3, section 2.3.6, of the Volume 2, Chapter 2 tutorial (Editing DEMs)."
111 10/11/2008–2/12/2009—"WMS kills itself upon completion of the step 2, section 2.6.1, of tutorial vol 3, chapter 2."
176 11/4/2008–2/12/2009—"On the WMS Testing machine WMS 8.1 disappears upon completion of tutorial Volume V, Chapter 2, Section 2.5.2, Step 1"
293 12/9/2008–2/12/2009—"WMS 8.1 crashes upon completion of step 21, section 2.4.2, in the MODRAT Chapter 2, MODRAT GIS Tutorial"
344 12/19/2008–2/12/2009—"XMDF (*.wms) file does not load (or possibly save) multiple datasets for 2D Grid, or single dataset for 2D Scatter"
874 12/8/2008–2/11/2009—"Tutorials, Volume I, Chapter 5, Section 5.8.3.2, Step 7. Crash"
875 12/8/2008–2/11/2009—"Tutorials, Volume I, Chapter 6, Section 6.2.4, Step 10. WMS Kills itself upon completion of this step."
430 1/13/2009–2/10/2009—TIN data and xmdf project file
437 12/8/2008–2/10/2009—Display Order andy nowak
659 12/8/2008–2/10/2009—Orange County testing results
734 12/8/2008–2/10/2009—Drawing order bug with drawing tools in 8.0 and 8.1
746 12/8/2008–2/10/2009—The Shuffle (display order) tools for drawing objects do not work
552 2/9/2009–2/9/2009—MODRAT 2.0 output (.out) problems
559 2/9/2009–2/9/2009—MODRAT 2.0 does not run when using input hydrograph files
545 2/6/2009–2/6/2009—Hydraulic structures entered at GSSHA nodes not saved
531 2/5/2009–2/5/2009—GSSHA retention depth option not working
527 2/4/2009–2/4/2009—Problems with the soil file running MODRAT 1.0
310 12/11/2008–1/30/2009—Change the radio buttons in the Watershed Data step of the hydrologic modeling wizard from radio buttons to toggle boxes
446 1/14/2009–1/30/2009—Problem saving wms.ini file from the hydrologic modeling wizard
340 12/18/2008–1/28/2009—WMS will not open gdm files with old coord sys
496 1/27/2009–1/27/2009—Crash deleting a GSSHA coverage
429 1/13/2009–1/26/2009—Reading in options set in the HEC-HMS Meteorologic Parameters
441 1/13/2009–1/26/2009—Extra default (elev) data set with ModClark model and *.wms (xmdf) project file
493 1/26/2009–1/26/2009—Cropping collars on *.tif images not working properly
296 12/9/2008–1/22/2009—WMS crashes when creating soil type coverage from the Hydrologic Modeling Wizard
440 1/13/2009–1/22/2009—HEC-HMS ModClark transform option not saved with *.wpr or *.wms (xmdf) project files
483 1/22/2009–1/22/2009—Hydrologic Modeling Wizard skips around
258 11/25/2008–1/19/2009—We don't read 2D grid datasets when saving/reading the grid as an XMDF file-see description
371 12/8/2008–1/19/2009—Help file not working for some help buttons
743 12/8/2008–1/19/2009—Save GSSHA Project File resets display options
183 11/6/2008–1/16/2009—WMS crash in Grid Options dialog
184 11/6/2008–1/16/2009—WMS crashes in Grid Options dialog (Displaying Grid Points)
359 12/23/2008–1/16/2009—Adverse slopes displayed on all coverages that support stream arcs
416 1/9/2009–1/16/2009—Crash when creating an index map before initializing GSSHA
428 1/13/2009–1/16/2009—WMS displays multiple hydrographs in the same window with the same color
278 12/4/2008–1/15/2009—Using radar rainfall data for long-term gridded simulation
241 11/20/2008–1/9/2009—WMS crashes (disappears) when using select feature line branch tool
228 11/14/2008–1/8/2009—WMS 8.1 crashes without warning when snapping the upstream nodes of two streams together
155 10/28/2008–1/6/2009—Fill below and Fill above options are backwards in WMS 8.1
233 11/18/2008–1/2/2009—"WMS 8.1 Disappears upon completion of the last step of section 2.13.1 of the Volume VI, Chapter 2 tutorial."
112 10/13/2008–12/30/2008—"Extra edit field for ""Round culverts"" in GSSHA"
142 10/24/2008–12/18/2008—Problem displaying filmloops
242 11/20/2008–12/18/2008—WMS crashes in Cross-Section Attributes dialog
217 11/12/2008–12/17/2008—Add tmcontours.dwg and trailmountain.dem to the Tins directory of tutorials for WMS 8.2
229 11/14/2008–12/17/2008—Add the lc.wpr file on Chris' computer and all its associated files to the HSPF tutorial directory and delete littlecotton.wpr
321 12/15/2008–12/17/2008—Displaying properties of selections in the Properties Window
322 12/15/2008–12/17/2008—Start time for link/node datasets in GSSHA models with precip gages not correct
181 11/4/2008–12/16/2008—We need a default max conveyance depth value for GSSHA cross section channels in WMS 9.0
317 12/12/2008–12/16/2008—Unitialized memory crash
233 12/8/2008–12/15/2008—Crash when updating contours
175 11/4/2008–12/12/2008—WMS Crashes after confirming the overwrite of a storm drain file.
191 11/7/2008–12/12/2008—WMS crashes when viewing wetland cells in 2D Grid Display Options
269 12/2/2008–12/12/2008—"Users should set horizontal and vertical units to meters at the beggining of the Volume 5, Chapter 1, HSPF Tutorial."
274 12/3/2008–12/12/2008—WMS crashes when trying to assign detention basin parameters
195 11/10/2008–12/11/2008—Help About Window needs to be updated
161 10/29/2008–12/10/2008—WMS crashes at the end of the CE-QUAL-W2 Tutorial in WMS 8.1
230 11/17/2008–12/10/2008—Bug in WMS 8.2 when right-clicking on a spreadsheet cell and selecting another cell
213 11/12/2008–12/9/2008—"The transform command is in the TIN menu of the data module, but is not in the right-click menu for a TIN (8.1 and 8.2)"
156 10/28/2008–12/8/2008—Measure tool disappears if snapped to a vertex or node in WMS 8.1
232 11/17/2008–12/8/2008—Measure tool cannot trace arcs
289 12/8/2008–12/8/2008—DEM color-filled contours with flow distance contours toggled on causes crash
290 12/8/2008–12/8/2008—Basin labels displayed with excess space between parameters
834 12/8/2008–12/8/2008—GSSHA Bug List from tutorials

Intermediate release WMS 8.1.4 – December 8, 2008

An update to WMS 8.1 has been posted to Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/. The following known bugs have been fixed in this version:

Bug Id Date Submitted—Updated-Summary

270 12/2/2008–12/4/2008—Delineate Crash
791 11/4/2008–12/4/2008—The Display Order options on the Display Options window don't work
134 10/23/2008–12/3/2008—Define Land Use and Soil Data step in Wizard not working with GSSHA Model Coverage in 9.0
273 12/2/2008–12/3/2008—File IO problem when assigning reservoirs to MODRAT diversions
102 10/7/2008–12/2/2008—WMS crashes when color fill contouring a 2D grid and then dragging the WMS window to my other monitor
118 10/17/2008–12/2/2008—Problem reading DEMs
115 10/16/2008–12/2/2008—Contouring issue – all contour appear the same color (red)
131 10/22/2008–12/2/2008—Saving shapefile *.prj files
136 10/23/2008–12/1/2008—WMS 9.0 crashes when clicking "Compute Index Mapping Tables" in the Hydrologic Modeling Wizard
4 7/9/2008–12/1/2008—Installation issues with copy protection and new demo password generation.
194 11/7/2008–11/25/2008—change xmdf file extension from *.wpr to *.wms
152 10/28/2008–11/20/2008—Computing rational method hydrographs triggers a bunch of graphics asserts in WMS 8.1
174 11/4/2008–11/18/2008—WMS disappears in the HSPF tutorial (Vol V, Ch 1) when reading in littlecotton.wpr
218 11/12/2008–11/17/2008—DEM display shifts when creating feature arcs
877 11/4/2008–11/17/2008—WMS kills itself upon completion of Tutorial 2-2, section 2.2.3, step 7 or 8.
38 8/7/2008–11/14/2008—Can't edit culvert parameters – Zack Young
146 10/27/2008–11/14/2008—WMS 8.1 crashes when placing interior outlets
135 10/23/2008–11/14/2008—When opening a GSSHA project in WMS 9.0, the wizard should set the current model to be GSSHA
145 10/27/2008–11/14/2008—TIN display bug in WMS 8.1 – entire tin shifts when closing a feature arc
150 10/28/2008–11/14/2008—WMS 8.1 crashes when adding subbasins and re-delineating after having computed a CN
870 11/4/2008–11/14/2008—GSSHA Rain Gage File I/O Bug
190 11/7/2008–11/13/2008—DEM contouring on screen is reversed (canyons are shown as ridges and ridges as canyons)
224 11/13/2008–11/13/2008—Polygon and DEM point selection does not update correctly in graphics window
182 11/6/2008–11/13/2008—Canceling out of TOPAZ Units dialog still writes out a TOPAZ elevation file
123 10/21/2008–11/13/2008—Embankment Arc Profile Editor has several bugs (at least 9) in 9.0
851 11/4/2008–11/13/2008—WMS Crashes when trying to create shapefiles from these coverages
857 11/4/2008–11/13/2008—Embankment dialog does not change arc elevations when creating a vertical curve
692 11/4/2008–11/12/2008—HMS | Compute Grid Parameters does not seem to work for computing SMA grid parameters
196 11/10/2008–11/10/2008—Cannot define GSSHA link break nodes with erodible cross section stream arcs

Intermediate release WMS 8.1.3 – November 4, 2008

An update to WMS 8.1 has been posted to Aquaveo's web site. The best place to obtain the update is from the download link on Aquaveo's web site at http://www.aquaveo.com/. The following known bugs have been fixed in this version:

Bug Id Date Submitted—Updated-Summary

173 10/31/2008–11/4/2008—WMS 8.1 Crashes upon completion of step 20, section 4.5.1 of the Volume II, Chapter 4 Tutorial. (HEC-HMS Interface)
144 10/24/2008–10/31/2008—WMS 8.1 soil legend is squished
167 10/30/2008–10/30/2008—Crash saving coordinate system metadata with DEM
113 10/14/2008–10/23/2008—WMS disappears upon double clicking on the flood.wpr file in the "open" file dialog.
133 10/23/2008–10/23/2008—When moving basin labels the heads of the arrows are quite large on my computer (The WMS testing machine).
114 10/14/2008–10/23/2008—Upon Opening the run1.wpr file in Volume 3, Chapter 3 Tutorial WMS Crashes.
637 10/31/2008–10/31/2008—Error upon saving file from the Volume 1 Chapter 3 Tutorial.
876 10/30/2008–10/30/2008—WMS kills itself upon completion of Tutorial 2-1, section 1.3.5, step 7.
345 10/30/2008–10/30/2008—Observation coverage does nothing
860 10/30/2008–10/30/2008—Problems editing/saving/writing vertical curve weir data from a hydraulic structure point
837 10/29/2008–10/29/2008—CE-QUAL-W2 issues
283 10/29/2008–10/29/2008—Georeferencing is wrong for images saved with collar cropped
816 10/28/2008–10/28/2008—WMS 8.1 Freezes in the Tc Wizard when rainfall depth is not entered.
817 10/28/2008–10/28/2008—Hydrographs not visible near end of MODRAT-3 GIS Tutorial.
829 10/28/2008–10/28/2008—WMS 8.1 gives a lot of asserts when removing flat triangles on TINs
315 10/28/2008–10/28/2008—Saving Basin Only Projects
359 10/28/2008–10/28/2008—WMS can't find HSPF LT executable
855 10/28/2008–10/28/2008—Problem with clearing selections when selecting an item in the project explorer
826 10/27/2008–10/27/2008—Bug in setting min and max contour intervals for Cumulative Rainfall Data
868 10/27/2008–10/27/2008—Copy and paste error within WMS spreadsheets when commas are used
849 10/27/2008–10/27/2008—Crash after importing TIN file (RELEASE VERSION ONLY)
858 10/24/2008–10/24/2008—Swap edges tool is MESSED UP
383 10/24/2008–10/24/2008—Cross Section computational stations remain at 0.0 when extracting Cross sections for SMPDBK
862 10/24/2008–10/24/2008—Interpolation method other than IDW causes crash
832 10/23/2008–10/23/2008—TR-55 spreadsheet labels are always dimmed
836 10/23/2008–10/23/2008—Can't cancel out of contour options if min countour value is greater than max value
838 10/23/2008–10/23/2008—Bug In CE-QUAL-W2 Tutorial block: Measure tool in segments dialog resets length to zero
830 10/23/2008–10/23/2008—Building polygons around streams assigns polygons the wrong type
137 10/23/2008–10/23/2008—Right-click option in spreadsheets
145 10/22/2008–10/22/2008—TR-20 Reservoir Data
77 10/22/2008–10/22/2008—Displaying arc after reading in TIN
764 10/21/2008–10/21/2008—Vista Problem: wmsnff.exe crashes in Windows Vista
871 10/21/2008–10/21/2008—Can we make the model wrapper resizable?
872 10/21/2008–10/21/2008—Outflow Sedograph Plot Window bug
869 10/20/2008–10/20/2008—GSSHA Soil Erosion dialog needs units
562 10/20/2008–10/20/2008—Error appears when saving HEC-1 file with average precip defined
870 10/20/2008–10/20/2008—GSSHA Rain Gage File I/O Bug
854 10/17/2008–10/17/2008—GSSHA Multi-gage interpolation methods remain dimmed after importing a Multi-gage file
807 10/17/2008–10/17/2008—Error writing curve number dataset when writing HEC-HMS file
821 10/16/2008–10/16/2008—Static Text String for file path in Convert Grids dialog is too short
840 10/16/2008–10/16/2008—Units for Wetland polygons do not match units reported on the gsshawiki
811 10/16/2008–10/16/2008—Map Drawing Fonts will crash if non-standard fonts used
740 10/15/2008–10/15/2008—Hydrographs not shown in the Volume 2 - Chapter 4 (HEC-1) Tutorial
172 10/15/2008–10/15/2008—Tree right click menus bug, with "Change module when tree selection changes" off
206 10/15/2008–10/15/2008—DEM delineation and redistributing arcs
822 10/15/2008–10/15/2008—Bug in Contour Options dialog
772 10/14/2008–10/14/2008—Film loops do not work
815 10/14/2008–10/14/2008—Map Attributes Dialog Crash
825 10/14/2008–10/14/2008—Incremental Rainfall dataset shows the wrong dates and times in the properties window
828 10/14/2008–10/14/2008—Bug when viewing values from Hydrograph Plots
814 10/13/2008–10/13/2008—WMS crashes when double clicking on GSSHA embankment arc "low points"
865 10/13/2008–10/13/2008—Problem reading HEC-RAS Solution, crash when reading WMS 8.1 project file into WMS 9.0
820 10/13/2008–10/13/2008—Bugs in Volume 2, Tutorial 7 of GSSHA Training course
873 10/13/2008–10/13/2008—Virtual Earth gives you errors
824 10/10/2008–10/10/2008—Bug in Convert Grids dialog
827 10/10/2008–10/10/2008—Error when Importing Grids for GSSHA : "Error Reading Scalar Binary File"
859 10/10/2008–10/10/2008—Crash when selecting gssha hydraulic structures
852 10/10/2008–10/10/2008—GSSHA bug: GW_INIT_MOISTURE card not needed, not recognized by GSSHA
856 10/10/2008–10/10/2008—Web Services Dialog - Tutorials Vol II, Ch 1, Section 1.3.3
846 10/9/2008–10/9/2008—Problem displaying adverse slopes in GSSHA coverage
864 10/9/2008–10/9/2008—GSSHA Stochastic run dialog crashes after reading GSSHA project file
351 10/6/2008–10/6/2008—Tutorial files for tutorial 3 (basic feature objects)
354 10/3/2008–10/3/2008—Typo in new tutorials

Intermediate release WMS 8.1.1 – October 2, 2008

Note about this update: Because NFF has been replaced by NSS in WMS 8.1, you may need to uninstall NFF from your computer before installing the update to WMS 8.1. It may also be a good idea to install NSS on your computer, though this should not be necessary. After installing this update, if you have trouble running NSS in WMS 8.1, make sure your NSSv4.mdb database file in the WMS 8.1 directory exists and is not set to Read-Only. If you continue to have problems, download and install NSS from this location.

The NFF (National Flood Frequency) database has been converted to the newer NSS (National Streamflow Statistics) database in WMS 8.1.
A problem running GSSHA in "batch" mode has been fixed.
A problem in web services with converting data to anything other than NAD 83 has been fixed.
"File Import Wizard – Step 1 of 2" Dialog freezes upon clicking next in the Vol 1 Ch 5 tutorial has been fixed.
Arc Selection Problem – Tutorials – Volume 1, Chapter 6, Section 6.2.3, step4 has been fixed.
Tutorials, Volume II, Chapter 1, Section 1.3, step 4 – mixed units in "Units" dialog has been fixed.
Terra Server creates an error in the Volume III, Chapter 1, Tutorial has been fixed.
Tutorials, Volume III, Chapter 3, Section 3.4.2, Step 6 – Z Scale Combo Box inactive has been fixed.
Penman Evapotranspiration method parameters not displaying in Mapping Tables (GSSHA) has been fixed.

v • e WMS – Watershed Modeling System
Modules:	Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter
Models:	CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55
Toolbars:	Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools
Aquaveo

WMS:Release Notes WMS: Difference between revisions

Revision as of 20:56, 17 November 2014

Contents

Important Note

Intermediate Release 9.1.12 – May 6, 2014

Intermediate Release 9.1.10 – November 22, 2013

Intermediate Release 9.1.7 – August 13, 2013

Intermediate Release 9.1.6 – July 18, 2013

Release 9.1/Intermediate Release 9.1.4 – February 22, 2013

Release 9.0/Intermediate Release 9.0.8 – October 5, 2012

Release 9.0 Beta – January 24, 2012

Release 8.4/Intermediate Release WMS 8.4.9 – February 3, 2011

Other fixes and updates

Intermediate Release WMS 8.3.4 – June 7, 2010

Intermediate Release WMS 8.3.3 – March 19, 2010

Release 8.3.0/Intermediate Release WMS 8.3.1 – January 26, 2010

Intermediate Release WMS 8.2.6 – September 22, 2009

Intermediate Release WMS 8.2.2 – June 23, 2009

Intermediate Release WMS 8.2.1 – May 4, 2009

Release WMS 8.2.0 – April 16, 2009

Intermediate release WMS 8.2.1 (beta) – March 9, 2009

Intermediate release WMS 8.1.6 – March 4, 2009

Intermediate release WMS 8.1.4 – December 8, 2008

Intermediate release WMS 8.1.3 – November 4, 2008

Intermediate release WMS 8.1.1 – October 2, 2008

Related Topics

Navigation menu

Page actions

Page actions

Personal tools

XMS Projects

Search

Links

Tools

@@ Line 41: / Line 41: @@
 * 25657; Author: ejones; Date: Thursday, September 26, 2013 11:12:38 AM; Message: Merged revision(s) 25656 from devproj/trunk/Dev/WMS/APP/bin/modrat: Fixed a bug in Modrat with generating a hydraulic parameter table used for channel routing ........
 * 25518; Author: csmemoe; Date: Wednesday, September 18, 2013 3:32:23 PM; Message: Merged revision(s) 25517 from devproj/trunk/Dev: Cleaned up some code in ocmodels.cpp-determining what Tree Mapping does. ........
+* 25487; Author: csmemoe; Date: Tuesday, September 17, 2013 4:20:31 PM; Message: Fixed a problem with images that were not displayed being checked in the project explorer window.
-----
+* 25240; Author: csmemoe; Date: Friday, September 06, 2013 9:25:10 AM; Message: Merged revision(s) 25239 from devproj/trunk/Dev: Fixed issue 0006424: WMS not saving user defined DEM names ........
+* 25226; Author: csmemoe; Date: Thursday, September 05, 2013 3:04:31 PM; Message: Merged revision(s) 25223 from devproj/trunk/Dev/WMS/APP/source/Hydrology/GSSHA/casc2d.h: Fixed issue 0006481: Error Opening Summary File in Gssha Calibration (tut 57) and cleaned up lots of code related to solutions, etc. ........
-Revision: 25487
-Author: csmemoe
-Date: Tuesday, September 17, 2013 4:20:31 PM
-Message:
-Fixed a problem with images that were not displayed being checked in the project explorer window.
-----
-Revision: 25240
-Author: csmemoe
-Date: Friday, September 06, 2013 9:25:10 AM
-Message:
-Merged revision(s) 25239 from devproj/trunk/Dev:
-Fixed issue 0006424: WMS not saving user defined DEM names
-........
-----
-Revision: 25226
-Author: csmemoe
-Date: Thursday, September 05, 2013 3:04:31 PM
-Message:
-Merged revision(s) 25223 from devproj/trunk/Dev/WMS/APP/source/Hydrology/GSSHA/casc2d.h:
-Fixed issue 0006481: Error Opening Summary File in Gssha Calibration (tut 57) and cleaned up lots of code related to solutions, etc.
-........
 ----