WMS:Rational Method Edit Parameters: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(21 intermediate revisions by the same user not shown)
Line 1: Line 1:
Like the other models supported by WMS, the Rational Method can be defined for a watershed/catchment developed from feature objects, DEMs, or TINs, or built using the tools provided in the hydrologic modeling module under the ''Tree'' menu. Once the topologic tree has been constructed the ''Rational Method'' dialog can be accessed using the '''Run Simulation''' command from the ''Rational'' menu.
[[File:RationalMethodEditParameters.png|thumb|450 px|''Rational Method'' parameters dialog.]]
Like the other models supported by WMS, the Rational Method can be defined for a watershed/catchment developed from feature objects, DEMs, or TINs, or built using the tools provided in the hydrologic modeling module under the ''Tree'' menu. Once the topologic tree has been constructed, the ''Rational Method'' dialog can be accessed using the '''Run Simulation''' command from the ''Rational'' menu. It can also be accessed by selecting a basin or outlet, then right-clicking and selecting the '''Edit Parameters''' menu command.
 
The ''Rational Method'' dialog allows entering all of the necessary values for computing a peak flow for a selected catchment area, or confluence point. The values for ''C'', ''i'', and ''A'' represent the values of the currently selected basin or outlet. Options include:
 
*''Display''
**''Type'' – Options include "Basins" or "Outlets" which will determine the options in the parameters section below.
**''Show'' – Options include "Selected" or "All". The "Selected" option will on show options for the currently selected outlet or basin. The "All" option will show values for all basins and outlets in the project.
*''Units''
*''Parameters'' – Section for all values that can be set. Along with the following options, there can be a column for Basin, Outlet, and Unit options depending on how the dialog was reached.
**Name
**Runoff Coefficient
**Rainfall Intensity
**[[WMS:Rational Method Rainfall Intensity|Compute I – IDF Curves]]
**Area
**Time of Concentration
**[[WMS:Travel Times from Basin Data|Compute Tc – Basin Data]]
**[[WMS:Combining Arc Travel Times|Compute Tc – Map Data]]
**Routing Lag Time
**[[WMS:Combining Arc Travel Times|Compute Lag Time]]
**[[WMS:Detention Basin Calculator|Define Reservoir]]
**Flowrate
**[[WMS:Rational Method Computing Hydrographs|Compute Hydrographs]]


The ''Rational Method'' dialog allows you to enter all of the necessary values for computing a peak flow for a selected catchment area, or confluence point. The values for <math>C</math>, <math>i</math>, and <math>A</math> represent the values of the currently selected basin or outlet.


==Related Topics==
==Related Topics==
Line 11: Line 32:


{{WMSMain}}
{{WMSMain}}
[[Category:Rational Method|E]]
[[Category:WMS Parameters|R]]
[[Category:Rational Method Dialogs|E]]

Latest revision as of 21:33, 8 June 2023

Rational Method parameters dialog.

Like the other models supported by WMS, the Rational Method can be defined for a watershed/catchment developed from feature objects, DEMs, or TINs, or built using the tools provided in the hydrologic modeling module under the Tree menu. Once the topologic tree has been constructed, the Rational Method dialog can be accessed using the Run Simulation command from the Rational menu. It can also be accessed by selecting a basin or outlet, then right-clicking and selecting the Edit Parameters menu command.

The Rational Method dialog allows entering all of the necessary values for computing a peak flow for a selected catchment area, or confluence point. The values for C, i, and A represent the values of the currently selected basin or outlet. Options include:

  • Display
    • Type – Options include "Basins" or "Outlets" which will determine the options in the parameters section below.
    • Show – Options include "Selected" or "All". The "Selected" option will on show options for the currently selected outlet or basin. The "All" option will show values for all basins and outlets in the project.
  • Units
  • Parameters – Section for all values that can be set. Along with the following options, there can be a column for Basin, Outlet, and Unit options depending on how the dialog was reached.


Related Topics


v • e
WMS – Watershed Modeling System
Modules:Terrain Data  •   Drainage  •   Map  •   Hydrologic Modeling  •   River  •   GIS  •   2D Grid  •   2D ScatterWMS.PNG
Models:CE-QUAL-W2  •   GSSHA  •   HEC-1  •   HEC-HMS  •   HEC-RAS  •   HSPF  •   MODRAT  •   NSS  •   OC Hydrograph  •   OC Rational  •   Rational  •   River Tools  •   Storm Drain  •   SMPDBK  •   SWMM  •   TR-20  •   TR-55
Toolbars:Modules  •   Macros  •   Units   •   Digitize  •   Static Tools  •   Dynamic Tools  •   Drawing  •   Get Data Tools
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=WMS:Rational_Method_Edit_Parameters&oldid=159370"