WMS:TR-20 Job Control Parameters: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(28 intermediate revisions by 3 users not shown)
Line 1: Line 1:
The Job Control parameters include all of the data necessary to run a TR-20 analysis that are not a part of a basin, reach, or reservoir. The following are the specific parameters defined as part of job control:
[[File:TR20jobcontrol.png|thumb|375 px|Example of the ''TR-20 Job Control'' dialog.]]
The ''TR-20 Job Control'' parameters include all of the data necessary to run a TR-20 analysis that are not a part of a basin, reach, or reservoir. The following are the specific parameters defined as part of job control:
==Title==
Enter a name and/or project description identifying the model. Two different title records up to 72 characters each can be entered. The title records will appear at the top of the TR20 input file.
 
==Unit Hydrograph Definition==
TR-20 offers two ways of defining the unit hydrograph used to compute runoff from the watershed. The first way is to use the standard SCS hydrograph provided with TR-20. Another way is to define an input hydrograph. This can be done by selecting the ''Define another dimensionless unit hydrograph'' radio button and defining the unit hydrograph in the time series editor.
 
When selecting the option to define another dimensionless unit hydrograph, a unit hydrograph must be defined using the XY Series Editor. Several unit hydrographs included with NRCS' WinTR-55 software have been loaded into WMS and can be used when running the WinTR-20 model from WMS.
 
==Time Control==
The time control section contains two options.
* ''Main Time Increment''
::The computational time increment defines the length in time between hydrograph ordinates. The interval should be specified in hours.
 
* ''Starting Time''
::The starting time of the simulation is defined in this entry. The time should be specified as floating point number of hours past midnight. For example 7:45 am would be entered as 7.75 and 1:20 p.m. as 13.33.
 
==Precipitation==
==Precipitation==
In TR20, there are two different ways to define precipitation. Precipitation is defined by selecting the '''Job Control''' command from the ''TR20'' menu. Then, select the '''Define Precipitation''' button to define precipitation over the entire watershed. A user can define precipitation by using either a standard SCS rainfall distribution or by defining a custom rainfall distribution. If a custom rainfall distribution is used, define a custom rainfall distribution in the ''XY Series Editor''. If one of the standard SCS rainfall distributions are used, a user can select one of the following rainfall types:
[[File:TR20precipitation.jpg|thumb|260 px|Example of the ''TR-20 Precipitation'' dialog.]]
In TR-20, there are two different ways to define precipitation. Precipitation is defined by selecting the '''Job Control''' command from the ''TR-20'' menu. Then, select the '''Define Precipitation''' button to define precipitation over the entire watershed. Define precipitation by using either a standard SCS rainfall distribution or by defining a custom rainfall distribution. If a custom rainfall distribution is used, define a custom rainfall distribution in the ''XY Series Editor''. If one of the standard SCS rainfall distributions are used, select one of the following rainfall types:


* Emergency Spillway and Freeboard
* Emergency Spillway and Freeboard
Line 10: Line 28:
* Type II: 48 hours
* Type II: 48 hours


For all the standard distributions, define the rainfall depth. For the dimensionless distribution, the user must also define the rainfall duration. It's only necessary to define the depth and/or duration of the rainfall for a custom distribution if one of the units entered in the ''XY Series Editor'' is dimensionless.
For all the standard distributions, define the rainfall depth. For the dimensionless distribution, also define the rainfall duration. It's only necessary to define the depth and/or duration of the rainfall for a custom distribution if one of the units entered in the ''XY Series Editor'' is dimensionless.


==Time Control==
==Output Control==
====Main Time Increment====
[[File:TR20joboutput.png|thumb|none|left|250 px|Example of the TR-20 ''Job Output Control'' dialog.]]
The computational time increment defines the length in time between hydrograph ordinates. The interval should be specified in hours.


====Starting Time====
==Base Flow==
The starting time of the simulation is defined in this entry. The time should be specified as floating point number of hours past midnight. For example 7:45 am would be entered as 7.75 and 1:20 p.m. as 13.33.
Base flow can be entered in TR-20 from the ''Job Control'' dialog by selecting the '''Define Base Flow''' button. There are two ways for defining base flow in TR-20. One way is to define a constant base flow. The second way is to define a triangular base flow in the watershed by specifying a volume in inches, a peak time in hours, and a base time in hours. By selecting the appropriate option, define either a triangular or a constant base flow for the watershed.
==Title==
Enter a name and/or project description identifying the model. Two different title records up to 72 characters each can be entered. The title records will appear at the top of the TR20 input file.
==Unit Hydrograph Definition==
TR20 offers two ways of defining the unit hydrograph used to compute runoff from the watershed. The first way is to use the standard SCS hydrograph provided with TR20. Another way is to define an input hydrograph. This can be done by selecting the '''Define another dimensionless unit hydrograph''' radio button and defining the unit hydrograph in the time series editor.


==Base Flow==
[[File:TR20baseflow.png|thumb|none|left|220 px|Example of the ''TR-20 Base Flow'' dialog.]]
Base flow can be entered in TR20 from the ''Job Control'' dialog by selecting the '''Define Base Flow''' button. There are two ways for defining base flow in TR20. One way is to define a constant base flow. The second way is to define a triangular base flow in the watershed by specifying a volume in inches, a peak time in hours, and a base time in hours. By selecting the appropriate option, a user can define either a triangular or a constant base flow for the watershed.


==Related Topics==
==Related Topics==
Line 39: Line 51:
[[Category:TR-20|J]]
[[Category:TR-20|J]]
[[Category:WMS Parameters|T]]
[[Category:WMS Parameters|T]]
[[Category:WMS Dialogs|T]]
[[Category:TR-20 Dialogs|J]]
[[Category:WMS Job Control|TR-20]]

Latest revision as of 20:59, 13 December 2023

Example of the TR-20 Job Control dialog.

The TR-20 Job Control parameters include all of the data necessary to run a TR-20 analysis that are not a part of a basin, reach, or reservoir. The following are the specific parameters defined as part of job control:

Title

Enter a name and/or project description identifying the model. Two different title records up to 72 characters each can be entered. The title records will appear at the top of the TR20 input file.

Unit Hydrograph Definition

TR-20 offers two ways of defining the unit hydrograph used to compute runoff from the watershed. The first way is to use the standard SCS hydrograph provided with TR-20. Another way is to define an input hydrograph. This can be done by selecting the Define another dimensionless unit hydrograph radio button and defining the unit hydrograph in the time series editor.

When selecting the option to define another dimensionless unit hydrograph, a unit hydrograph must be defined using the XY Series Editor. Several unit hydrographs included with NRCS' WinTR-55 software have been loaded into WMS and can be used when running the WinTR-20 model from WMS.

Time Control

The time control section contains two options.

  • Main Time Increment
The computational time increment defines the length in time between hydrograph ordinates. The interval should be specified in hours.
  • Starting Time
The starting time of the simulation is defined in this entry. The time should be specified as floating point number of hours past midnight. For example 7:45 am would be entered as 7.75 and 1:20 p.m. as 13.33.

Precipitation

Example of the TR-20 Precipitation dialog.

In TR-20, there are two different ways to define precipitation. Precipitation is defined by selecting the Job Control command from the TR-20 menu. Then, select the Define Precipitation button to define precipitation over the entire watershed. Define precipitation by using either a standard SCS rainfall distribution or by defining a custom rainfall distribution. If a custom rainfall distribution is used, define a custom rainfall distribution in the XY Series Editor. If one of the standard SCS rainfall distributions are used, select one of the following rainfall types:

  • Emergency Spillway and Freeboard
  • Type I: 24 hours
  • Type II: 24 hours
  • Type IA: 24 hours
  • Type III: 24 hours
  • Type II: 48 hours

For all the standard distributions, define the rainfall depth. For the dimensionless distribution, also define the rainfall duration. It's only necessary to define the depth and/or duration of the rainfall for a custom distribution if one of the units entered in the XY Series Editor is dimensionless.

Output Control

Example of the TR-20 Job Output Control dialog.

Base Flow

Base flow can be entered in TR-20 from the Job Control dialog by selecting the Define Base Flow button. There are two ways for defining base flow in TR-20. One way is to define a constant base flow. The second way is to define a triangular base flow in the watershed by specifying a volume in inches, a peak time in hours, and a base time in hours. By selecting the appropriate option, define either a triangular or a constant base flow for the watershed.

Example of the TR-20 Base Flow dialog.

Related Topics