WMS:Universal Rational Hydrograph: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
|} | |} | ||
|- style="background:#dfdfdf;" | |- style="background:#dfdfdf;" | ||
! | !''t''/''t<sub>c</sub>'' !!''Q''/''Q<sub>p</sub>'' | ||
|- Align=Center | |- Align=Center | ||
|0 ||0.00 | |0 ||0.00 | ||
| Line 35: | Line 35: | ||
|11 ||0.00 | |11 ||0.00 | ||
|} | |} | ||
Notice that the peak occurs at ''3*t<sub>c</sub>'', and the time base is equal to ''11*t<sub>c</sub>''. | |||
Notice that the peak occurs at < | |||
[[Image:UniversalRationalHydrograph.png]] | [[Image:UniversalRationalHydrograph.png]] | ||
| Line 44: | Line 42: | ||
where: | where: | ||
* < | * ''t<sub>c</sub>'' = Time of concentration. | ||
* | * ''Q'' = Flow at time <math>t</math>, in cfs. | ||
* < | * ''Q<sub>p</sub>'' = Peak flow. | ||
Revision as of 16:05, 14 December 2016
The Universal Rational Hydrograph uses a set of coefficients and the peak discharge to compute the hydrograph ordinates at different times. The coefficients are shown in the following table and the resulting hydrograph is displayed.
| ||
| t/tc | Q/Qp | |
|---|---|---|
| 0 | 0.00 | |
| 1 | 0.21 | |
| 2 | 0.30 | |
| 3 | 1.00 | |
| 4 | 0.54 | |
| 5 | 0.39 | |
| 6 | 0.25 | |
| 7 | 0.18 | |
| 8 | 0.15 | |
| 9 | 0.14 | |
| 10 | 0.13 | |
| 11 | 0.00 | |
Notice that the peak occurs at 3*tc, and the time base is equal to 11*tc.
where:
- tc = Time of concentration.
- Q = Flow at time , in cfs.
- Qp = Peak flow.
Related Topics
WMS – Watershed Modeling System | ||
|---|---|---|
| Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter |  |
| Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
| Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
| Aquaveo | ||
