SMS:Model Specific Coverages: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 2: Line 2:


The following model specific coverages are available:
The following model specific coverages are available:
*3D Structure
**3D Structure
**3D Bridge (legacy)
* [[SMS:ADCIRC Coverages|ADCIRC]] – Used to build a conceptual model of an ADCIRC project.
* [[SMS:ADCIRC Coverages|ADCIRC]] – Used to build a conceptual model of an ADCIRC project.
** Boundary Conditions
** Boundary Conditions
** Recording Stations
** Recording Stations<!--
** Pipes
** Pipes
** Wind Stations
** Wind Stations-->
* ADH &ndash; Has two coverage options.
* ADH &ndash; Has three coverage options.
**[[SMS:ADH|ADH]] &ndash; Used to build a conceptual model of an ADH project.
** Boundary Conditions
**[[SMS:ADH Vessel Coverage|Vessel]] &ndash; Used to add vessels to the simulation and give them paths to follow.
** Materials
** Sediment Materials
<!--**[[SMS:ADH|ADH]] &ndash; Used to build a conceptual model of an ADH project.
**[[SMS:ADH Vessel Coverage|Vessel]] &ndash; Used to add vessels to the simulation and give them paths to follow.-->
* [[SMS:BOUSS-2D|BOUSS2D]] &ndash; Used to build feature objects and parameters for a BOUSS-2D model simulation.
* [[SMS:BOUSS-2D|BOUSS2D]] &ndash; Used to build feature objects and parameters for a BOUSS-2D model simulation.
**[[SMS:BOUSS-2D_Using_the_Model#Damping_.2F_Porosity_coverage|Damping]] &ndash; Used to create arcs with damping attributes.
**[[SMS:BOUSS-2D_Using_the_Model#Damping_.2F_Porosity_coverage|Damping]] &ndash; Used to create arcs with damping attributes.
Line 24: Line 30:
* [[SMS:CGWAVE|CGWAVE]] &ndash; Used to build a conceptual model of a CGWAVE project.
* [[SMS:CGWAVE|CGWAVE]] &ndash; Used to build a conceptual model of a CGWAVE project.
* [[SMS:CMS-Flow Coverages|CMS-Flow]] &ndash; Utilize two different coverage types.
* [[SMS:CMS-Flow Coverages|CMS-Flow]] &ndash; Utilize two different coverage types.
**Rubble Mound Jetties
**Boundary Conditions &ndash; Used to create the computational domain (or grid).
**Boundary Conditions &ndash; Used to create the computational domain (or grid).
**[[SMS:CMS-Flow/Save Points|Save Points]] &ndash; Used to define special output locations from the computation.
**[[SMS:CMS-Flow/Save Points|Save Points]] &ndash; Used to define special output locations from the computation.
* [[SMS:CMS-Wave|CMS-Wave]]  &ndash; Used to build a conceptual model of a CMS-Wave project.
* [[SMS:CMS-Wave|CMS-Wave]]  &ndash; Used to build a conceptual model of a CMS-Wave project.
**Observation Cells
**Nesting Points
**Structures
* [[SMS:EFDC Coverage|EFDC]] &ndash; Used to create curvilinear grids for use with the EFDC model (EFDC grid format).
* [[SMS:EFDC Coverage|EFDC]] &ndash; Used to create curvilinear grids for use with the EFDC model (EFDC grid format).
* [[SMS:ESMF - Earth System Modeling Framework|ESMF]] &ndash; Used to couple ADCIRC and STWAVE models.
* [[SMS:ESMF - Earth System Modeling Framework|ESMF]] &ndash; Used to couple ADCIRC and STWAVE models.
* [[SMS:EWN|EWN]] &ndash; Engineering with Nature (EWN).
* [[SMS:EWN|EWN]] &ndash; Engineering with Nature (EWN).
**EWN Features
**Sediment Volume Management
* [[SMS:FESWMS|FESWMS]] &ndash; Used to build a conceptual model of a FESWMS project.
* [[SMS:FESWMS|FESWMS]] &ndash; Used to build a conceptual model of a FESWMS project.
* [[SMS:GenCade|GenCade]] &ndash; Used to build a conceptual model of a GenCade project.
* [[SMS:GenCade|GenCade]] &ndash; Used to build a conceptual model of a GenCade project.

Revision as of 21:27, 19 August 2024

Specific model coverage can be selected by right-clicking on the Map Data Map Folder.svg item in the Project Explorer and selecting Type | Models followed by selecting the model coverage; or by right-clicking on the Map Data Map Folder.svg item and selecting New Coverage command followed by using the New Coverage dialog.

The following model specific coverages are available:

  • 3D Structure
    • 3D Structure
    • 3D Bridge (legacy)
  • ADCIRC – Used to build a conceptual model of an ADCIRC project.
    • Boundary Conditions
    • Recording Stations
  • ADH – Has three coverage options.
    • Boundary Conditions
    • Materials
    • Sediment Materials
  • BOUSS2D – Used to build feature objects and parameters for a BOUSS-2D model simulation.
    • Damping – Used to create arcs with damping attributes.
    • Porosity – Used to create arcs with porosity attributes.
    • Roughness – Uses polygons to define the varying roughness.
    • Wavemaker – Used to create arcs that define wave parameters.
  • BOUSS Runup/Overtopping – Uses multiple coverages to create the Runup/Overtopping model simulation. The coverages are:
    • Probes – Used to create feature objects for probes.
    • Damping – Used to create arcs with damping attributes.
    • Porosity – Used to create arcs with porosity attributes.
    • Roughness – Uses polygons to define the varying roughness.
    • Transects – Used to create arcs to represent the 1-d grid used for a run-up simulation.
    • Wavemaker – Used to create arcs that define wave parameters.
  • CGWAVE – Used to build a conceptual model of a CGWAVE project.
  • CMS-Flow – Utilize two different coverage types.
    • Rubble Mound Jetties
    • Boundary Conditions – Used to create the computational domain (or grid).
    • Save Points – Used to define special output locations from the computation.
  • CMS-Wave – Used to build a conceptual model of a CMS-Wave project.
    • Observation Cells
    • Nesting Points
    • Structures
  • EFDC – Used to create curvilinear grids for use with the EFDC model (EFDC grid format).
  • ESMF – Used to couple ADCIRC and STWAVE models.
  • EWN – Engineering with Nature (EWN).
    • EWN Features
    • Sediment Volume Management
  • FESWMS – Used to build a conceptual model of a FESWMS project.
  • GenCade – Used to build a conceptual model of a GenCade project.
  • Generic Model Coverage
  • PTM – Allows simulating particle transport processes.
  • SED-ZLJ – Sediment model used with the EFDC coverage.
  • SRH-2D – Uses multiple coverages to create the SRH-2D model simulation. The coverages are:
    • Boundary Conditions – Used to create boundary conditions for hydraulic computation.
    • Obstructions – Used to create feature objects that represent obstructions, such as bank protrusions and boulder clusters.
    • Monitor Points – Used to gather specific information for that location at all time steps.
    • Materials – Allows creating material zones specific to the SRH-2D model.
  • STWAVE – Used to create an STWAVE project.
    • Monitoring Cells
    • Nesting Points
  • TABS (RMA2/RMA4) – Used to build a conceptual model for a RMA2 or RMA4 project.
  • TUFLOW Coverages – Used to create feature objects for a TUFLOW simulation. Includes several coverages.
    • 1D Cross Sections – Used to define open channel cross section data for 1D networks.
    • 1D Networks – Used to create channels and nodes for a 1D domain.
    • 1D Water Level Lines – Define the locations where 1D solutions will be written as 2D output.
    • 1D Water Level Points – Used in conjunction with water level lines to guide TUFLOW on creating 2D output for 1D networks.
    • 1D/2D BCs and Links – Used to specify cell code (active/inactive) areas of the 2D model domain.
    • 1D/2D Connections – Used with the 2D BC coverage to link 2D and 1D domains.
    • 2D Flow Constriction Shapes – Used to define flow constrictions in TUFLOW.
    • 2D Flow Constriction (cell based)
    • 2D Grid Extents – Used to create TUFLOW grids.
    • 2D Materials – Used to assign material data for use in the TUFLOW simulation.
    • 2D Miscellaneous (FLC, WRF, IWL, SRF, and AD)
    • 2D Z Lines (advanced) – Modifies geometry through time to simulate levee failures or other changes to elevation data within the model run.
    • 2D Z Lines/Polygons (simple) – Used as geometry modifications and force grid elevation values using arcs or polygons.
    • 2D/2D Linkages – Used to setup TUFLOW to use multiple 2D domains.
  • WAM – Used to build a conceptual model of a WAM project.
  • Wind – Represents a storm as an arc or series of arcs that follow the storm track and define the storm attributes at the nodes along the arc.
    • Holland/PBL – Used to create a storm track for a PBL project for use in ADCIRC.
    • Synthetic Storm – Provides a mechanism for creating a PBL coverage based upon user specified parameters.


Related Topics