WMS:Preparing Stage Data

There are three basic ways to create stage data for flood plain delineation. The tutorial on floodplain delineation demonstrates all three methods.

Hydraulic Model Data

When running HEC-RAS or other supported hydraulic models, resulting water surface elevations are created as a scatter set for each cross section in the model. Typically the number of scatter points created from the cross sections is insufficient to adequately interpolate a flood plain on the TIN and so these points need to be interpolated along the river center line and cross sections in order to create a scatter set with sufficient points for interpolation. The additional points along cross sections are created with the same value as the first point which does not violate the assumptions of a 1D model like HEC-RAS. Additional points along center lines are created by linearly interpolating from the cross sections (again being consistent with the assumptions of 1D models).

Read a scatter data set

Scatter sets can be read in as 2D scatter files, or imported using the text wizard if existing data can be created in a spreadsheet or other consistent text file format. The interpolation tools for cross sections and center lines can also be used after a file has been read.

Manually create scatter points by digitizing in WMS

The 2D Scatter module provides a tool for creating new scatter points interactively. Water surface elevation can be entered for as the data value. Generally in such cases you will want to take advantage of a centerline and cross sections to develop a larger data set for flood plain delineation. For example if you create a 1D-Hydraulic centerline to represent your stream, and optionally cross sections you can interpolate computed values along these feature objects.

Use the Channel Calculator

This is actually similar to the manual method. A new scatter point can be created along a cross section arc at the intersection point of a centerline using the water surface elevation (computed depth plus lowest elevation along the cross section) computed with the channel calculator.

Related Topics

• Read a Stage File
• Importing Text
• Interpolating Hydraulic Model Results
• Floodplain Delineation
• Channel Calculator