WMS:Feature Object Guidelines: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 11: Line 11:
===2. Digitize the Map===
===2. Digitize the Map===


The map can then be digitized using a tablet and standard digitizing software outside of WMS and then imported as a CAD or GIS file, or it can be created using "heads up," or "on-screen digitizing" inside of WMS. In order to do heads up digitizing you will need one of two things: 1) digital elevation data that can be contoured by WMS, or 2) a scanned tiff image that can be read into WMS and used as a background map.
The map can then be digitized using a tablet and standard digitizing software outside of WMS and then imported as a CAD or GIS file, or it can be created using "heads up," or "on-screen digitizing" inside of WMS. In order to do heads up digitizing, a user will need one of two things: 1) digital elevation data that can be contoured by WMS, or 2) a scanned tiff image that can be read into WMS and used as a background map.


[[Image:feature_object_guidelines_1.jpg]]
[[Image:feature_object_guidelines_1.jpg]]

Revision as of 17:03, 26 August 2014

GIS vector data includes points, lines, and polygons that are used in WMS to represent basins, streams, and key points such as outlets or culverts. In WMS we refer to this GIS data as Feature Objects, and tools for using them are included in the Map Module. Feature object data can be used by itself to create a watershed model for hydrologic analysis or as a companion in the development of watershed models with TINs and DEMs.

Many times it is not practical to obtain digital elevation data and perform an automated watershed characterization prior to setting up a hydrologic model. Watershed and sub-basin boundaries may already be known and stored as part of a GIS or CAD database, or it may be straight-forward to trace an existing map to define streams and basins. With WMS, properly structured hydrologic models can be created automatically from points, lines, and polygons. Since these data are often already developed and stored in a GIS, importing from ARC/INFO® and ArcView®, or DXF files is easily done.

The following are the basic steps taken to create watershed models from GIS data within WMS.

1. Obtain a Map or Already Developed GIS or CAD Data

The first step is to obtain a map that defines the streams and basins which will be modeled. If such a map already exists digitally as a CAD drawing or as part of a GIS database then it can be imported directly and the next step can be skipped.

2. Digitize the Map

The map can then be digitized using a tablet and standard digitizing software outside of WMS and then imported as a CAD or GIS file, or it can be created using "heads up," or "on-screen digitizing" inside of WMS. In order to do heads up digitizing, a user will need one of two things: 1) digital elevation data that can be contoured by WMS, or 2) a scanned tiff image that can be read into WMS and used as a background map.

Feature object guidelines 1.jpg

3. Construct Feature Object Topology

The points and lines must be assigned the right attribute types, and the polygons for sub-basins constructed from the lines.

If you use data already developed in a GIS then you may have to do some editing. This will depend on how well the data being imported matches with the required data for watershed model development. In WMS three primary layers as illustrated below : 1) A point layer representing the watershed outlet and any sub-basin outlet or confluence points, 2) a line layer representing a stream network, and 3) a polygon layer representing watershed boundaries.

If all three layers exist then construction of the watershed model topology can proceed, but if one or more of the layers are absent, they must be created manually from within WMS. For example if you only had a file that contained sub-basin boundaries, you would need to digitize the stream network and define the outlet locations of the sub-basins.

An important point to remember in WMS is that lines used to define a stream network have direction. For each line (arc) there is a beginning and an ending node and “flow” along the line is defined in this direction. When interactively creating lines in WMS you should always create streams from downstream to upstream. If you import a set of lines that has been previously created by another program you may discover that the order does not match what is required by WMS. The Reorder Streams command in the Feature Objects menu (Map module) can be used to properly order the incoming lines so that they can be converted to streams.

Feature object guidelines 2.jpg

4. Define the Hydrologic Model

Once the watershed model representation has been created, data defining a specific hydrologic model can be entered through a series of user friendly dialogs. Since WMS allows for all hydrologic modeling input to be defined separate from any digital terrain data, it is not required that the watershed model developed with feature objects be to scale. Area and length parameters can simply be manually defined using the model interface. The figure below shows how a topologic model is automatically created from point, line, and polygon feature object data.

Feature object guidelines 3.jpg


Related Topics