WMS:Menu Bar: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Image:WMSIcon_Menu_Bar.png|thumb|350 px|The Menu Bar]]
[[Image:WMSIcon_Menu_Bar.png|thumb|340 px|The Menu Bar]]
The commands in WMS are accessed through pull down menus located in the menu bar. Each menu can be accessed with the mouse or by holding down the ''ALT'' key and pressing the underlined letter in the menu title. Once a menu is visible the individual commands can be selected with the mouse or by holding down the ''ALT'' key and pressing the underlined letter in the menu command.
The commands in WMS are accessed through pull-down menus located in the menu bar. Each menu can be accessed with the mouse or by holding down the ''ALT'' key and pressing the underlined letter in the menu title. Once a menu is visible the individual commands can be selected with the mouse or by holding down the ''ALT'' key and pressing the underlined letter in the menu command.


When the active module is changed, the menus change to a set of menus associated with the selected module. The first three menus ([[WMS:File Menu|''File'']], [[WMS:Edit Menu|''Edit'']], [[WMS:Display Menu|''Display'']]) are the same for every module, as are the last two ([[WMS:Window Menu|''Window'']], [[WMS:Help Menu|''Help'']]). The remaining menus are dependent on the selected module.
When the active module is changed, the menus change to a set of menus associated with the selected module. The first three menus ([[WMS:File Menu|''File'']], [[WMS:Edit Menu|''Edit'']], [[WMS:Display Menu|''Display'']]) are the same for every module, as are the last two ([[WMS:Window Menu|''Window'']], [[WMS:Help Menu|''Help'']]). The remaining menus are dependent on the selected module.
Line 6: Line 6:
If a menu item is dimmed, then it can not be used until the proper conditions exist. Typically this means the appropriate data has not yet been created or selected.
If a menu item is dimmed, then it can not be used until the proper conditions exist. Typically this means the appropriate data has not yet been created or selected.


Some menus for creation and manipulation of data objects appear when right-clicking in the Project Explorer.
Some menus for creation and manipulation of data objects appear when right-clicking in the Project Explorer or when right-clicking on feature objects.


==WMS Menus==
WMS contains standard menus and dynamic menus. The dynamic menus change depending on the active module or model.
===Standard Menus===
The following menus are always available.
* [[WMS:File Menu|''File'']] – Commands for importing, saving, exporting, etc.
* [[WMS:Edit Menu|''Edit'']] – Commands for selecting, deleting, preferences, etc.
* [[WMS:Display Menu|''Display'']] – Commands for view options.
* [[WMS:Help Menu|''Help'']] – Commands for registration, users manual, etc.
* [[WMS:Window Menu|''Window'']] – Commands for organizing WMS windows.
===Module Menus===
The following menus are available depending on the active module.
* [[WMS:TIN Menu|''TIN'']] – Available in the [[WMS:Terrain Data Module|Terrain]] and [[WMS:Drainage Module|Drainage]] modules.
* [[WMS:DEM Menu|''DEM'']] – Available in the WMS:Terrain Data Module|Terrain]] and [[WMS:Drainage Module|Drainage]] modules.
* [[WMS:Overview_of_Floodplain_Delineation#Flood_Menu|''Flood'']] – Available in the [[WMS:Terrain Data Module|Terrain]] module.
* [[WMS:Feature Objects Menu|''Feature Objects'']] – Available in the [[WMS:Map Module|Map]] module.
* [[WMS:Drawing_Tools#Drawing_Objects_Menu|''Drawing Objects'']] – Available in the [[WMS:Map Module|Map]] module.
* [[WMS:CAD Data|''CAD'']] – Available in the [[WMS:Map Module|Map]] module.
* [[WMS:Topologic Trees|''Tree'']] – Available in the [[WMS:Hydrologic Modeling Module|Hydrologic Modeling]] module.
* ''Models'' – Available in the [[WMS:Map Module|Map]] and [[WMS:Hydrologic Modeling Module|Hydrologic Modeling]] modules. This menu will display commands available for all models allowing viewing model options before selecting a model.
* [[WMS:Hydrographs|''Hydrographs'']] – Available in the [[WMS:Hydrologic Modeling Module|Hydrologic Modeling]] and [[WMS:2D Grid Module|2D Grid]] modules.
* [[WMS:Hydrologic/Hydraulic Calculators|''Calculators'']] – Available in the [[WMS:Hydrologic Modeling Module|Hydrologic Modeling]] module.
* ''Data'' – Available in the [[WMS:GIS_Menus#Data|GIS]], [[WMS:2D Grid Module|2D Grid]], and [[WMS:2D Scatter Point Module|2D Scatter Point]] modules.
* [[WMS:GIS_Menus#Selection|''Selection'']] – Available in the [[WMS:GIS Module|GIS]] module.
* [[WMS:GIS_Menus#Mapping|''Mapping'']] – Available in the [[WMS:GIS Module|GIS]] module.
* [[WMS:GIS_Menus#Images|''Images'']] – Available in the [[WMS:GIS Module|GIS]] module.
* ''Grids'' – Available in the [[WMS:2D Grid Module|2D Grid]] module.
* ''Interpolation'' – Available in the [[WMS:2D Scatter Point Module|2D Scatter Point]] module.
===Model Menus===
The following menus are available depending on the active numeric model.
* [[WMS:CE-QUAL-W2 Menu|''CE-QUAL-W2'']] – Available in the Map module and works with the CE-QUAL-W2 Branch and CE-QUAL-W2 Segment coverages.
* [[WMS:EPANET#EPANET_Menu|''EPANET'']] – Available in the Hydraulic module.
* [[WMS:HEC-1#HEC-1_Menu|''HEC-1'']] – Available in the Hydrologic Modeling module.
* [[WMS:HEC-HMS#HEC-HMS_Menu|''HEC-HMS'']] – Available in the Hydrologic Modeling module.
* [[WMS:HEC-RAS#HEC-RAS_Menu|''HEC-RAS'']] – Available in the Hydraulic module.
* [[WMS:HSPF#HSPF_Menu|''HSPF'']] – Available in the Hydrologic Modeling module.
* [[WMS:GSSHA Menu|''GSSHA'']] – Available in the Map and 2D Grid modules.
* [[WMS:MODRAT WMS Interface|''MODRAT'']] – Available in the Hydrologic Modeling module.
* [[WMS:NSS#NSS_Menu|''NSS'']] – Available in the Hydrologic Modeling module.
* [[WMS:Orange_County_Unit_Hydrograph#OC_Hydrograph_Menu|''OC Hydrograph'']] – Available in the Hydrologic Modeling module.
* [[WMS:Orange_County_Rational_Method#OC_Rational_Menu|''OC Rational'']] – Available in the Hydrologic Modeling module.
* [[WMS:Rational_Method#Rational_Menu|''Rational'']]  – Available in the Hydrologic Modeling module.
* [[WMS:River Tools|''River Tools'']] – Available in the Map module. Works with the 1D-Hydraulic Centerline and 1D-Hydraulic Cross Section coverages.
* ''Sanitary Sewer'' – Available with a Sanitary Sewer coverage in the Map module. Identical to the [[WMS:Storm_Drain#Storm_Drain_Menu|''Storm Drain'']] menu. Works with the SWMM Sanitary model.
* [[WMS:SMPDBK#SMPDBK_Menu|''SMPDBK'']] – Available in the Hydraulic module.
* [[WMS:Storm_Drain#Storm_Drain_Menu|''Storm Drain'']] – Available with a Storm Drain coverage in the Map module. Contains the '''Map→1D Schematic''' menu command for SWMM or HY-12 modeling.
* [[WMS:SWMM#SWMM_Menu|''SWMM'']] – Available in the Hydrologic Modeling and Hydraulic modules.
* [[WMS:SWMM#SWMM_Sanitary_Menu|''SWMM Sanitary'']] – Available in the Hydrologic Modeling and Hydraulic modules.
* [[WMS:TR-20#TR-20_Menu|''TR-20'']] – Available in the Hydrologic Modeling module.
* [[WMS:TR-55#TR-55_Menu|''TR-55'']] – Available in the Hydrologic Modeling module.
* ''Water Distribution'' – Available with a Water Distribution coverage in the Map module. Identical to the [[WMS:Storm_Drain#Storm_Drain_Menu|''Storm Drain'']] menu. Works with the EPANET model.


==Related Topics==
==Related Topics==
* [[WMS:WMS Screen|WMS Screen]]
* [[WMS:Graphical User Interface|WMS Graphical User Interface]]
* [[WMS:Project Explorer Overview|Project Explorer]]
* [[WMS:Project Explorer Overview|Project Explorer]]


Line 17: Line 69:


[[Category:WMS General Information|M]]
[[Category:WMS General Information|M]]
[[Category:WMS Menus|M]]
[[Category:WMS Menus|Menu Bar]]
 
{{stub}}

Latest revision as of 19:03, 5 May 2020

The Menu Bar

The commands in WMS are accessed through pull-down menus located in the menu bar. Each menu can be accessed with the mouse or by holding down the ALT key and pressing the underlined letter in the menu title. Once a menu is visible the individual commands can be selected with the mouse or by holding down the ALT key and pressing the underlined letter in the menu command.

When the active module is changed, the menus change to a set of menus associated with the selected module. The first three menus (File, Edit, Display) are the same for every module, as are the last two (Window, Help). The remaining menus are dependent on the selected module.

If a menu item is dimmed, then it can not be used until the proper conditions exist. Typically this means the appropriate data has not yet been created or selected.

Some menus for creation and manipulation of data objects appear when right-clicking in the Project Explorer or when right-clicking on feature objects.

WMS Menus

WMS contains standard menus and dynamic menus. The dynamic menus change depending on the active module or model.

Standard Menus

The following menus are always available.

  • File – Commands for importing, saving, exporting, etc.
  • Edit – Commands for selecting, deleting, preferences, etc.
  • Display – Commands for view options.
  • Help – Commands for registration, users manual, etc.
  • Window – Commands for organizing WMS windows.

Module Menus

The following menus are available depending on the active module.

Model Menus

The following menus are available depending on the active numeric model.

  • CE-QUAL-W2 – Available in the Map module and works with the CE-QUAL-W2 Branch and CE-QUAL-W2 Segment coverages.
  • EPANET – Available in the Hydraulic module.
  • HEC-1 – Available in the Hydrologic Modeling module.
  • HEC-HMS – Available in the Hydrologic Modeling module.
  • HEC-RAS – Available in the Hydraulic module.
  • HSPF – Available in the Hydrologic Modeling module.
  • GSSHA – Available in the Map and 2D Grid modules.
  • MODRAT – Available in the Hydrologic Modeling module.
  • NSS – Available in the Hydrologic Modeling module.
  • OC Hydrograph – Available in the Hydrologic Modeling module.
  • OC Rational – Available in the Hydrologic Modeling module.
  • Rational – Available in the Hydrologic Modeling module.
  • River Tools – Available in the Map module. Works with the 1D-Hydraulic Centerline and 1D-Hydraulic Cross Section coverages.
  • Sanitary Sewer – Available with a Sanitary Sewer coverage in the Map module. Identical to the Storm Drain menu. Works with the SWMM Sanitary model.
  • SMPDBK – Available in the Hydraulic module.
  • Storm Drain – Available with a Storm Drain coverage in the Map module. Contains the Map→1D Schematic menu command for SWMM or HY-12 modeling.
  • SWMM – Available in the Hydrologic Modeling and Hydraulic modules.
  • SWMM Sanitary – Available in the Hydrologic Modeling and Hydraulic modules.
  • TR-20 – Available in the Hydrologic Modeling module.
  • TR-55 – Available in the Hydrologic Modeling module.
  • Water Distribution – Available with a Water Distribution coverage in the Map module. Identical to the Storm Drain menu. Works with the EPANET model.

Related Topics