WMS:Curb and Gutter Flow Analysis
From XMS Wiki
(Redirected from WMS:Curb and Gutter Analysis Dialog)
Jump to navigationJump to search
The Hydraulic Toolbox's Curb and Gutter Analysis calculator that uses the FHWA HEC-22 equations, is built into WMS and can be used to examine flow across storm drain inlets for a variety of curb and gutter openings. The dialog is reached through the Calculators | Curb & Gutters command in the Hydrologic Modeling module.
Dialog Description
The dialog has three main parts as described below.
Gutter
The Gutter section has values for defining the gutter dimensions. Values include:
- Longitudinal Slope of Road
- Cross=slope of Pavement
- Define Cross-slope of Gutter
- Manning's Roughness
- Gutter Width
- Design Flow
- Width of Spread
- 'Compute Unknown
The final values show the results of the computation.
- Gutter Depression
- Area of Flow
- Eo (Gutter Flow to Total Flow)
- Depth of Curb
Inlet
The Inlet section allows entering parameters for the inlet.
- Inlet Location
- Percent Clogging
- Inlet Types
- Grate Types
- Grate Width
- Grate Length
- Length of Inlet
- Curb Opening Height
- Local Depression
Parameters Table
The parameters table will display the inlet data after the Compute Inlet Data button has been clicked.
Related Topics
WMS – Watershed Modeling System | ||
|---|---|---|
| Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter |  |
| Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
| Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
| Aquaveo | ||
