GMS:TIN Commands: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(8 intermediate revisions by 4 users not shown)
Line 7: Line 7:
; [[GMS:Triangulation|Triangulate]] : Creates triangles from existing vertices on the active TIN using the [[GMS:Triangulation|Delauney]] criteria. If triangles already exist, they will be deleted.  
; [[GMS:Triangulation|Triangulate]] : Creates triangles from existing vertices on the active TIN using the [[GMS:Triangulation|Delauney]] criteria. If triangles already exist, they will be deleted.  
; [[GMS:Editing_a_TIN#Subdivide_TIN|Subdivide TIN...]] : Opens the ''Subdivision Factor'' dialog that allows entering a factor by which existing triangles will be split into smaller triangles.  
; [[GMS:Editing_a_TIN#Subdivide_TIN|Subdivide TIN...]] : Opens the ''Subdivision Factor'' dialog that allows entering a factor by which existing triangles will be split into smaller triangles.  
; [[GMS:Creating_a_3D_Mesh#Fill_Between_TINs_-.3E_3D_Mesh|Fill Between TINs → 3D Mesh]] : Creates a [[GMS:3D_Mesh_Module|3D mesh]], or adds onto an existing 3D mesh, by filling in the space between two TINs. A 2D mesh must exist and is used as a projection mesh for the 3D elements. Two TINs must be selected.
; [[GMS:Horizons_to_Solids|Horizons → Solids...]] : Opens the Horizons to Solids wizard which can be used to create [[GMS:Solid_Module|solids]] from a combination of boreholes, TINs, and conceptual models.
; [[GMS:Horizons_to_3D_Mesh|Horizons → 3D Mesh...]] : Opens the ''Horizons to Mesh'' wizard which can be used to create a [[GMS: 3D_Mesh_Module |3D mesh]] from a combination of boreholes, TINs, and conceptual models.
; [[GMS:Horizons_to_UGrid|Horizons → UGrid...]] : Opens the ''Horizons to UGrid'' wizard which can be used to create a [[GMS: UGrid_Module |UGrid]] from a combination of boreholes, TINs, and conceptual models.
; Convert To... :
; [[GMS:Converting_TINS_to_Other_Data_Types#TIN_-.3E_2D_Scatter_Points|TIN → 2D Scatter Points]] : Creates a new [[GMS:2D_Scatter_Point_Module|2D Scatter Point set]] from the vertices of the active TIN. The scatter points could then be used for interpolation.  
; [[GMS:Converting_TINS_to_Other_Data_Types#TIN_-.3E_2D_Scatter_Points|TIN → 2D Scatter Points]] : Creates a new [[GMS:2D_Scatter_Point_Module|2D Scatter Point set]] from the vertices of the active TIN. The scatter points could then be used for interpolation.  
; [[GMS:Converting_TINS_to_Other_Data_Types#TIN_-.3E_2D_Mesh|TIN → 2D Mesh]] : Creates a new [[GMS:2D_Mesh_Module|2D mesh]] from the active TIN, preserving the triangles.  
; [[GMS:Converting_TINS_to_Other_Data_Types#TIN_-.3E_2D_Mesh|TIN → 2D Mesh]] : Creates a new [[GMS:2D_Mesh_Module|2D mesh]] from the active TIN, preserving the triangles.  
; [[GMS:Creating_a_3D_Mesh#Fill_Between_TINs_-.3E_3D_Mesh|Fill Between TINs → 3D Mesh]] : Creates a [[GMS:3D_Mesh_Module|3D mesh]], or adds onto an existing 3D mesh, by filling in the space between two TINs. A 2D mesh must exist and is used as a projection mesh for the 3D elements. Two TINs must be selected.
; TIN → Extruded Solid : [[File:ExtrudeOffset TIN to Solid.png|thumb|225 px|The ''Extrude/Offset Tin → Solid'' dialog]]Opens the ''Extrude/Offset Tin → Solid'' dialog which is used to extrude the TIN vertically up or down to form a solid.  
; [[GMS:Horizons_to_Solids|Horizons → Solids...]] : Opens the Horizons to Solids wizard which can be used to create [[GMS:Solid_Module|solids]] from a combination of boreholes, TINs and conceptual models.
; [[GMS:Horizons_to_3D_Mesh|Horizons → 3D Mesh...]] : Opens the Horizons to Mesh wizard which can be used to create a [[GMS: 3D_Mesh_Module |3D mesh]] from a combination of boreholes, TINs and conceptual models.  
; [[GMS:Converting_TINS_to_Other_Data_Types|TIN Boundary → Polygons]] : Creates a new coverage containing a polygon derived from the outer boundary of the TIN.  
; [[GMS:Converting_TINS_to_Other_Data_Types|TIN Boundary → Polygons]] : Creates a new coverage containing a polygon derived from the outer boundary of the TIN.  
; [[GMS:Converting_TINS_to_Other_Data_Types|TIN Thiessen → Polygons]] : Creates a new coverage containing polygons derived from the [[GMS:TIN_Display_Options#thiessen polygons|thiessen polygons]] of the TIN.  
; [[GMS:Converting_TINS_to_Other_Data_Types|TIN Thiessen → Polygons]] : Creates a new coverage containing polygons derived from the [[GMS:TIN_Display_Options#thiessen polygons|thiessen polygons]] of the TIN.  
; Advanced... :
; TIN Contours → Arcs : Creates a new coverage containing feature arcs derived from the linear contours displayed on the TIN.  
; TIN Contours → Arcs : Creates a new coverage containing feature arcs derived from the linear contours displayed on the TIN.  
; Vertex Strings → Arcs : Creates a new coverage containing a feature arc derived from the vertex string on the TIN (if one exists).  
; Vertex Strings → Arcs : Creates a new coverage containing a feature arc derived from the vertex string on the TIN (if one exists).  
; TIN → Extruded Solid : [[File:ExtrudeOffset TIN to Solid.png|thumb|225 px|The ''Extrude/Offset Tin → Solid'' dialog]]Opens the ''Extrude/Offset Tin → Solid'' dialog which is used to extrude the TIN vertically up or down to form a solid.  
; Vertex Strings → Extruded Solid : Creates a new solid from each of the selected TINs by extruding each of the TINs up or down to an elevation specified by the user. Extruded TINs are useful in the construction of solid models of soil stratigraphy.
; [[GMS:Building_Solids_and_3D_Meshes_with_TINs|Fill Between TINs → Solid]] : Creates a [[GMS:Solid_Module|solid]] by extruding one or more TINs to a base elevation and then performing a [[GMS:Set_Operations|set operation]] to remove the solid portions outside the TINs.  
; [[GMS:Building_Solids_and_3D_Meshes_with_TINs|Fill Between TINs → Solid]] : Creates a [[GMS:Solid_Module|solid]] by extruding one or more TINs to a base elevation and then performing a [[GMS:Set_Operations|set operation]] to remove the solid portions outside the TINs.  
; [[GMS:Editing_a_TIN#Adding_Breaklines|Add Breakline(s)]] : Inserts edges into the TIN from a defined breakline, splitting or swapping triangles as necessary.  
; [[GMS:Editing_a_TIN#Adding_Breaklines|Add Breakline(s)]] : Inserts edges into the TIN from a defined breakline, splitting or swapping triangles as necessary.  
Line 23: Line 28:
; Intersect TINs : Displays the intersection line between two selected TIN surfaces (if they intersect).  
; Intersect TINs : Displays the intersection line between two selected TIN surfaces (if they intersect).  
; [[GMS:Horizons_to_HUF|Horizons → HUF]] : Opens the ''Horizons → HUF'' wizard to create [[GMS:HUF_Package|MODFLOW HUF]] data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package.  
; [[GMS:Horizons_to_HUF|Horizons → HUF]] : Opens the ''Horizons → HUF'' wizard to create [[GMS:HUF_Package|MODFLOW HUF]] data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package.  
; Z Values → Dataset : Creates a dataset from the Z locations of the vertices.
<!--; Z Values &rarr; Dataset : Creates a dataset from the Z locations of the vertices.
; Map to Z Values : Moves the Z locations of the vertices to the values in the dataset.
; Map to Z Values : Moves the Z locations of the vertices to the values in the dataset.
; Zoom To Extents : Frames the Graphics Window around the selected objects.
; Zoom To Extents : Frames the Graphics Window around the selected objects.-->


==Related Topics==
==Related Topics==
Line 32: Line 37:


{{Navbox GMS}}
{{Navbox GMS}}
[[Category:TINs]]
[[Category:TINs|Com]]
[[Category:GMS Menus]]
[[Category:GMS Menus]]

Latest revision as of 20:15, 13 April 2022

GMS Commands
Common
File
Edit
Display
Modules
TINs
Boreholes
Solids
Mesh (2D)
Grid (2D)
Scatter Points (2D)
Interpolation (2D and 3D)
Mesh (3D)
Grid (3D)
Scatter Points (3D)
Feature Objects
GIS
UGrid
Models
FEMWATER
MODAEM
MODFLOW
mod-PATH3DU
MODPATH
MT3DMS
SEAWAT
SEEP2D
T-PROGS
UTEXAS
v • e

When the TIN module is active, the following commands can be found in the TIN menu:

New TIN...
Creates a new TIN and opens the TIN Properties dialog.
Lock All Vertices
Since it is possible to accidentally drag points, vertices can be "locked" to prevent them from being dragged or edited by toggling on this command.
TIN Settings...
Opens the Preferences dialog to the settings affecting TINs.
Triangulate
Creates triangles from existing vertices on the active TIN using the Delauney criteria. If triangles already exist, they will be deleted.
Subdivide TIN...
Opens the Subdivision Factor dialog that allows entering a factor by which existing triangles will be split into smaller triangles.
Fill Between TINs → 3D Mesh
Creates a 3D mesh, or adds onto an existing 3D mesh, by filling in the space between two TINs. A 2D mesh must exist and is used as a projection mesh for the 3D elements. Two TINs must be selected.
Horizons → Solids...
Opens the Horizons to Solids wizard which can be used to create solids from a combination of boreholes, TINs, and conceptual models.
Horizons → 3D Mesh...
Opens the Horizons to Mesh wizard which can be used to create a 3D mesh from a combination of boreholes, TINs, and conceptual models.
Horizons → UGrid...
Opens the Horizons to UGrid wizard which can be used to create a UGrid from a combination of boreholes, TINs, and conceptual models.
Convert To...
TIN → 2D Scatter Points
Creates a new 2D Scatter Point set from the vertices of the active TIN. The scatter points could then be used for interpolation.
TIN → 2D Mesh
Creates a new 2D mesh from the active TIN, preserving the triangles.
TIN → Extruded Solid
The Extrude/Offset Tin → Solid dialog
Opens the Extrude/Offset Tin → Solid dialog which is used to extrude the TIN vertically up or down to form a solid.
TIN Boundary → Polygons
Creates a new coverage containing a polygon derived from the outer boundary of the TIN.
TIN Thiessen → Polygons
Creates a new coverage containing polygons derived from the thiessen polygons of the TIN.
Advanced...
TIN Contours → Arcs
Creates a new coverage containing feature arcs derived from the linear contours displayed on the TIN.
Vertex Strings → Arcs
Creates a new coverage containing a feature arc derived from the vertex string on the TIN (if one exists).
Vertex Strings → Extruded Solid
Creates a new solid from each of the selected TINs by extruding each of the TINs up or down to an elevation specified by the user. Extruded TINs are useful in the construction of solid models of soil stratigraphy.
Fill Between TINs → Solid
Creates a solid by extruding one or more TINs to a base elevation and then performing a set operation to remove the solid portions outside the TINs.
Add Breakline(s)
Inserts edges into the TIN from a defined breakline, splitting or swapping triangles as necessary.
Select Boundary Triangles
Selects triangles on the outer boundary which meet the "long and thin" criteria specified in TIN settings.
Snap Vertices to TIN
Given some selected vertices, moves them so that they are on the surface of a TIN selected from a dialog.
Intersect TINs
Displays the intersection line between two selected TIN surfaces (if they intersect).
Horizons → HUF
Opens the Horizons → HUF wizard to create MODFLOW HUF data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package.

Related Topics


v • e
GMS – Groundwater Modeling System
Modules:2D Grid  •  2D Mesh  •  2D Scatter Point  •  3D Grid  •  3D Mesh  •  3D Scatter Point  •  Boreholes  •  GIS  •  Map  •  Solid  •  TINs  •  UGridsGMS Logo2.png
Models:FEFLOW  •  FEMWATER  •  HydroGeoSphere  •   MODAEM  •  MODFLOW  •  MODPATH  •  mod-PATH3DU  •  MT3DMS  •  MT3D-USGS  •  PEST  •  PHT3D  •  RT3D  •  SEAM3D  •  SEAWAT  •  SEEP2D  •  T-PROGS  •  ZONEBUDGET
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=GMS:TIN_Commands&oldid=154183"