WMS:GSSHA Menu

The GSSHA model has two menus: one that can be accessed through the GSSHA map coverage and the other through the 2D Grid module.

GSSHA Coverage Menu

This menu is available when a GSSHA coverage is the active coverage in the Map module.

Smooth Stream/Pipe Arcs

Opens the Smooth GSSHA Streams dialog.

Read Stream Elevation

Update Lake Cells

Renumber Links

Automatically reorders and numbers links and nodes in a stream channel.

Renumber Storm Drains

Automatically reorders and numbers links and nodes in a storm drain arc.

GSSHA Grid Menu

This menu is active when the 2D Grid module is active.

Open Project File

Brings up a browser to open a GSSHA project file. This browser will look for a GSSHA project file. A GSSHA project file begins with the first line either being GSSHAPROJECT or CASC2DPROJECT. Once a valid project file has been identified, WMS will read in all of the files needed for input to GSSHA. The channel input file is not read in but instead the channel input information is re-created from the WMS map file that stores the GSSHA coverage. GSSHA output files are not read in by the Open Project File command but instead are read by the Read Solution command.

Open Group

Brings up a browser to open a GSSHA group file.

Save Project File

Opens the Save GSSHA Project File dialog for saving a GSSHA project file. Specify the GSSHA project file name and location in the Save GSSHA Project File dialog. Select Save to save the GSSHA project file and all other GSSHA input files. WMS automatically uses the GSSHA project file name as a prefix for all GSSHA input files (file extensions are used to differentiate between GSSHA input files), except for the index map files, which are assigned default names using the convention id_map_##.idx, where ## is generated by WMS. All files are written to the same directory according to the specified location.

For long term simulations WMS copies the HMET file from its original location to the new GSSHA project directory.

It is also possible to manage all of the GSSHA input and output files names using the Manage files option in the GSSHA Job Control Parameters dialog.

Save Group

Opens the Save GSSHA Group File dialog for saving a GSSHA group file.

Job Control

Opens the GSSHA Job Control Parameters dialog.

Clean Digital Dams

Runs the CleanDam algorithm.

Precipitation

Opens the GSSHA Precipitation dialog.

Maps

Opens the GSSHA Maps dialog.

Map Tables

Brings up the GSSHA Map Table Editor.

Renumber Links

Automatically reorders and numbers links and nodes in a stream channel.

Renumber Storm Drains

Automatically reorders and numbers links and nodes in a storm drain arc.

Model Check

Runs through the input data for a GSSHA simulation and looks for obvious inconsistencies and problems with the model.

Run GSSHA

Launches the GSSHA model run.

Run GSSHA Group

Opens the Save and Run GSSHA Group dialog to select which projects to run.

Read Calibration Output

Read Solution

Brings up a browser to open a GSSHA solution file.

Related Topics

• GSSHA