User:Tswensen/mdt package: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 24: Line 24:
* ''DIFFLENMD'' – The length over which diffusion occurs in the low-permeability material, indicating how far molecules travel during diffusion.
* ''DIFFLENMD'' – The length over which diffusion occurs in the low-permeability material, indicating how far molecules travel during diffusion.
* ''TORTMD'' –  The tortuosity of the matrix domain, representing the path that a molecule must travel during diffusion in the low-permeability material.
* ''TORTMD'' –  The tortuosity of the matrix domain, representing the path that a molecule must travel during diffusion in the low-permeability material.
[[File:Species Properties.png|thumb|alt=Dialogue found through double-clicking MDT for MODFLOW-USG Transport]]
[[File:Species Properties.png|thumb|450 px]]
==SPECIES PROPERTIES==
==SPECIES PROPERTIES==
* ''KDMD'' – The adsorption coefficient in the matrix domain, showing how a contaminant binds to the low-permeability material.
* ''KDMD'' – The adsorption coefficient in the matrix domain, showing how a contaminant binds to the low-permeability material.

Revision as of 17:18, 11 February 2025

MODFLOW
Pre-processing
MODFLOW Commands
Building a MODFLOW Model
Map to MODFLOW
Calibration
Packages Supported in GMS
Saving a MODFLOW Simulation
Importing MODFLOW Files
Unsupported MODFLOW Features
Run MODFLOW
Post-processing
MODFLOW Display Options
MODFLOW Post-Processing Viewing Options
Reading a MODFLOW Simulation
Tutorials
Packages
Flow: BCF6, HUF, LPF, UPW
Solvers:

DE4, GMG, NWT, PCG,

PCGN, LMG, SIP, SOR,

SMS
Other:

BAS6, BFH, CHD1, CLN,

DRN1, DRT1, EVT1, ETS1,

GAGE, GHB1, GNC, HFB1,

HUF, LAK3, MNW1, MNW2,

OUT1, RCH1, RIV1, SFR2,

STR1, SUB1, SWI2, WEL1,

UZF1
v • e

MODFLOW-USG Transport is a version of MODFLOW that can be used to model groundwater flow and contaminate transport. To model the effects of matrix diffusion, it can be paired with the Matrix Diffusion Transport (MDT) package.

Note: The MDT package is not an official package released by USGS. The MDT package provided with GMS is still being developed and may change in the future. Newer versions of the package may not be compatible with older projects.

The MDT Package dialog is divided into two parts: one on the left which shows the main sections, and one on the right which shows the inputs for the current section.

COMMENTS

Comment lines can be added and will appear at the top of the MDT file.

VARIABLES

  • Cell-by-cell mass flux unit (IMDTCB) – Controls whether cell-by-cell mass flux terms are written to a specified unit number or listing file.
  • Immobile domain concentration unit (IMDTCF) – Controls whether matrix coefficients and immobile domain concentrations are saved to a specified unit number or the listing file.
  • Hydraulic conductivity for fracture only (FRAHK) – Specifies whether the hydraulic conductivity and storage terms apply only to the fracture (mobile) domain or to the entire medium during flow simulations.
  • Darcy flux hydraulic conductivity for fracture only (FRADARCY) – Specifies that the Darcy flux is computed only for the fracture domain, with hydraulic conductivity adjusted by the fracture volume fraction, and storage terms apply only to the fracture domain.
  • Shift matrix diffusion start time (TSHIFTMD) – Indicates that the MODFLOW start time is not the start time for matrix diffusion, and the variable TSHIFT represents the time elapsed since matrix diffusion began; the AIOLD1MD and AIOLD2MD coefficients are also input when TSHIFTMD is used.
  • Time elapsed since matrix diffusion began (tshift) – Represents the time elapsed since matrix diffusion began.

AQUIFER PROPERTIES

  • MDFLAG – An integer that controls how matrix diffusion is modeled in the system.
  • VOLFRACMD – The portion of a grid cell occupied by a higher permeability material, representing the mobile domain's volume fraction.
  • PORMD – The porosity of the low-permeability material in the matrix domain, showing the amount of space in a grid cell filled with immobile material.
  • RHOBMD – The dry bulk density of the low-permeability material in the matrix domain.
  • DIFFLENMD – The length over which diffusion occurs in the low-permeability material, indicating how far molecules travel during diffusion.
  • TORTMD – The tortuosity of the matrix domain, representing the path that a molecule must travel during diffusion in the low-permeability material.
File:Species Properties.png

SPECIES PROPERTIES

  • KDMD – The adsorption coefficient in the matrix domain, showing how a contaminant binds to the low-permeability material.
  • DECAYMD – The rate at which a substance degrades in the low-permeability material, based on a first-order decay process.
  • YIELDMD – The yield coefficient for chain decay at any location, representing the amount of mass produced by the decay of the parent component.
  • DIFFMD – The diffusion coefficient for each species in the matrix domain, representing how quickly a substance spreads through the low-permeability material.
  • AIOLD1MD – The concentration integral (equation 8) of each species in an element associated with matrix diffusion into an infinite acting adjacent aquitard (MDFLAG = 1, 3, 4, 5, 6, or 7). This value is used to restart a simulation with prior matrix diffusion.
  • AIOLD2MD – The concentration integral (equation 8) of each species in an element associated with matrix diffusion in low permeability zones that are embedded in the volume element (MDFLAG = 2, 5, 6, or 7). This value is used to restart a simulation with prior matrix diffusion.

Conversion from MODFLOW-USG Transport

When converting a MODFLOW 6 model to MODFLOW-USG Transport, use the following table when converting the MDT package:

MODFLOW 6 MODFLOW-USG Transport
Package Variable Package Variable
CNC PCB
DSP DIFFC BCT DIFFNC
MST POROSITY BCT PRSITY
MST BULK_DENSITY BCT BULKD
MST DISTCOEF BCT ADSORB
MDT MD_TYPE_FLAG MDT MDFLAG
MDT MD_FRACTION MDT VOLFRACMD
MDT MD_POROSITY MDT PORMD
MDT BULK_DENSITY MDT RHOBMD
MDT MD_DIFF_LENGTH MDT DIFFLENMD
MDT MD_TORTUOSITY MDT TORTMD
MDT MD_DIFF_COEFF MDT DIFFMD

Related Topics


Retrieved from "https://www.xmswiki.com/index.php?title=User:Tswensen/mdt_package&oldid=164272"