WMS:GSSHA Menu
From XMS Wiki
Jump to navigationJump to search
The GSSHA model has two menus: one that can be accessed through the GSSHA map coverage and the other through the 2D Grid module.
GSSHA Coverage Menu
This menu is available when a GSSHA coverage is the active coverage in the Map module.
- Smooth Stream/Pipe Arcs
- Opens the Smooth GSSHA Streams dialog.
- Read Stream Elevation
- Update Lake Cells
- Renumber Links
- Automatically reorders and numbers links and nodes in a stream channel.
- Renumber Storm Drains
- Automatically reorders and numbers links and nodes in a storm drain arc.
GSSHA Grid Menu
This menu is active when the 2D Grid module is active.
- Open Project File
- Brings up a browser to open a GSSHA project file. This browser will look for a GSSHA project file. A GSSHA project file begins with the first line either being GSSHAPROJECT or CASC2DPROJECT. Once a valid project file has been identified, WMS will read in all of the files needed for input to GSSHA. The channel input file is not read in but instead the channel input information is re-created from the WMS map file that stores the GSSHA coverage. GSSHA output files are not read in by the Open Project File command but instead are read by the Read Solution command.
- Open Group
- Brings up a browser to open a GSSHA group file.
- Save Project File
- Opens the Save GSSHA Project File dialog for saving a GSSHA project file.
- Save Group
- Opens the Save GSSHA Group File dialog for saving a GSSHA group file.
- Job Control
- Opens the GSSHA Job Control Parameters dialog.
- Clean Digital Dams
- Runs the CleanDam algorithm.
- Precipitation
- Opens the GSSHA Precipitation dialog.
- Maps
- Opens the GSSHA Maps dialog.
- Map Tables
- Brings up the GSSHA Map Table Editor.
- Renumber Links
- Automatically reorders and numbers links and nodes in a stream channel.
- Renumber Storm Drains
- Automatically reorders and numbers links and nodes in a storm drain arc.
- Model Check
- Runs through the input data for a GSSHA simulation and looks for obvious inconsistencies and problems with the model.
- Run GSSHA
- Launches the GSSHA model run.
- Run GSSHA Group
- Opens the Save and Run GSSHA Group dialog to select which projects to run.
- Read Calibration Output
- Read Solution
- Brings up a browser to open a GSSHA solution file.
Related Topics
WMS – Watershed Modeling System | ||
|---|---|---|
| Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter |  |
| Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
| Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
| Aquaveo | ||
