GMS:MODFLOW-2005
From XMS Wiki
| MODFLOW | |
|---|---|
| Pre-processing | |
| MODFLOW Commands | |
| Building a MODFLOW Model | |
| Map to MODFLOW | |
| Calibration | |
| Packages Supported in GMS | |
| Saving a MODFLOW Simulation | |
| Importing MODFLOW Files | |
| Unsupported MODFLOW Features | |
| Run MODFLOW | |
| Post-processing | |
| MODFLOW Display Options | |
| MODFLOW Post-Processing Viewing Options | |
| Reading a MODFLOW Simulation | |
| Tutorials | |
| Packages | |
| Flow: | BCF6, HUF, LPF, UPW |
| Solvers: | SMS |
| Other: | UZF1 |
Starting at GMS version 8.0, GMS supports MODFLOW 2005.
Choosing MODFLOW-2000 or MODFLOW-2005
Choosing to use MODFLOW-2000 or MODFLOW-2005 is done in the MODFLOW Global Options Dialog. At any time you can switch from one to the other.
Changes in MODFLOW-2005
The following list shows changes in MODFLOW-2005 from MODFLOW-2000.
- 1. SOR1 Solver
- MODFLOW-2005 no longer supports the SOR1 Solver.
- 2. PCG2 Solver
- MODFLOW-2005 replaces the DAMP variable with DAMPPCG and DAMPPCGT variables [1]. These two new variables allow different damping factors to be applied separately to steady-state and transient stress periods.
- 3. UZF Package
- MODFLOW-2005 added support for the Unsaturated Zone Flow (UZF) package.
- 4. LPF package
- MODFLOW-2005 provides more options for the LPF Package. Pictures below show the LPF package options supported in MODFLOW-2000 vs MODFLOW-2005.
- 5. PES and PEST
- PES is not available in MODFLOW 2005. Automated calibration in GMS is handled using PEST.
| GMS – Groundwater Modeling System | ||
|---|---|---|
| Modules: | 2D Grid • 2D Mesh • 2D Scatter Point • 3D Grid • 3D Mesh • 3D Scatter Point • Boreholes • GIS • Map • Solid • TINs • UGrids |  |
| Models: | FEFLOW • FEMWATER • HydroGeoSphere • MODAEM • MODFLOW • MODPATH • mod-PATH3DU • MT3DMS • MT3D-USGS • PEST • PHT3D • RT3D • SEAM3D • SEAWAT • SEEP2D • T-PROGS • ZONEBUDGET | |
| Aquaveo | ||
Retrieved from "https://www.xmswiki.com/index.php?title=GMS:MODFLOW-2005&oldid=61349"
