Search results

To print in to WMS, use the following steps: !style="text-align:left;"|1. Page setup and print parameters.

To print in to SMS, use the following steps: !style="text-align:left;"|1. Page setup and print parameters.

To print in to GMS, use the following steps: !style="text-align:left;"|1. Page setup and print parameters.

The following steps demonstrate how to use the print Layout Editor in GMS: :# Have data correctly displayed in the Graphics Window.

To use the Print Layout tool in to SMS, use the following steps: :# Have data correctly displayed in the Graphics Window.

...cit Package) solver package is one of the [[GMS:MODFLOW Packages Supported in GMS#Solver Packages|solver packages]] for MODFLOW supported by GMS. ...is the maximum number of times through the iteration loop in one time step in an attempt solve the system of finite-difference equations.

...he SOR solver only uses a head change convergence criterion and may result in significant volume budget error. ...he printout also occurs at the end of each stress period regardless of the print out interval.

...shown in the figure below. The various flow type properties may be found in HY-8 by selecting the '''Flow Types''' button from the ''Culvert Summary Ta ...due to outlet control is shown in the figure below: {{only in print|(Zoom in or click on this image to see it more clearly)}}

...or printing, and to exit the program. The following commands are contained in the ''File'' menu: ; Open... : This command is used to read in project files and to import data or other files generated outside of GMS.

In this dialog, select various 2D scatter point datasets and associate them wi ...button. The association between the datasets and the MODFLOW data is shown in the spread sheet labeled ''Dataset → MODFLOW data''.

...llocate more memory than any of us have available. Turning off this option in this situation is the best course of action. ...en within the respective files in ASCII format. The binary option results in more files, but uses less disk space. There is also a time savings during

...shortcuts for menu commands. Which macro toolbars appear at startup is set in the [[SMS:Preferences|''Preferences'']] dialog. The macro toolbars include: ...'''Print''' – Opens the ''Print'' dialog. See [[SMS:File Menu#Print|Print]].

In this example a combination of boreholes, user-defined cross sections, and T Image:SlopeXsectZoom.png|Zoomed in on cross sections

...accessed by double-clicking on the OC package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: ...RINT_FORMAT:'' – When turned on, allows you to specify the format to print to the listing file. Options include:

...ull of the point data are assigned the default extrapolation value entered in the ''Interpolation Options'' dialog. The figure below shows a network of t :{{hide in print|[[File:convex_hull.jpg|thumb|none|left|300 px|Network of triangles]]}}

{{hide in print| {{only in print|[[Image:Switching_MF2K5.jpg|200px|none|thumb|left|MODFLOW Global Option Dia

...le:Save Macro.svg|13 px]], and [[WMS:File Menu#Print|'''Print''']] [[File:Print Icon.svg|16 px]] appear at the top left of the WMS screen directly under t ...ctive View''' [[File:Oblique View Macro.svg|14 px]] – Draw all data in a 3-dimensional oblique view. Selecting the ''Display | View'' | '''Oblique

...ccessed by double-clicking on the GNC package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: **''Print input to listing file (PRINT_INPUT)'' – If turned on, indicates that

The Sparse Matrix Solver (SMS) Package is the only solver package compatible with [[GMS:MODFLOW-USG|MODFLOW-USG]] and is not c *''Comments (Text)'' – Places a comment in the solver.

...n of the '''Add | Diversion''' and '''Retrieve Diversion''' commands found in the ''Tree'' menu. Once created, data for the diversion can be defined and/ ..., selecting ''Add'' | '''Diversion''' and selecting '''New Diversion...''' in the ''Defined Diversions'' dialog.

...D Grid Display Options'' or ''3D Mesh Display Options'' dialogs. The items in the ''Isosurface Options'' dialog are as follows: In the next section of the dialog the number of isosurfaces and the isovalues

...absolute error, and root mean squared error for an observation measurement in a coverage. The error values may be listed for a single time step of a data Three error types are shown in the plot.

...ccessed by double-clicking on the MVR package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: **''PRINT_INPUT'' – Print input to listing file. Turn on to write the list of MVR information to the

Many commands in GMS are can be accessed using keyboard shortcuts. Shortcuts for standard menu commands are listed in the table below.

...ccessed by double-clicking on the RCH package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: **''READASARRAYS – Click to specify to use array-based input in the RCH package.

...ons of a braided stream, or other similar purpose. In order to participate in the continuity table, the nodestring must either be assigned as a boundary ...wrate across it. The flux across all other cross sections will be reported in the continuity table as a percentage of this flowrate, whether it be more,

...ccessed by double-clicking on the CHD package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: ...dash; Allow boundary names. Turn on to allow boundary names to be included in the list of constant-head cells.

{{only in print|[[Image:drt.png|thumb|right|275px|Illustration of DRT package<ref name="ofr ...ng the [[GMS:MODFLOW Conceptual Model Approach|conceptual model approach]] in the [[GMS:Map Module|map module]].

...ccessed by double-clicking on the DRN package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: ...dash; Allow boundary names. Turn on to allow boundary names to be included in the list of drain cells.

...ccessed by double-clicking on the GHB package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: ...dash; Allow boundary names. Turn on to allow boundary names to be included in the list of general head cells.

...groundwater flow. A more recent revision of the MNW package is available in the [[GMS:MNW2 Package|MNW2 package]]. A MODFLOW model can not use both the ...ng the [[GMS:MODFLOW Conceptual Model Approach|conceptual model approach]] in the [[GMS:Map Module|map module]].

...irst triangulated to form a network of triangles. The network of triangles only covers the convex hull of the point data, making extrapolation beyond the c ...ull of the point data are assigned the default extrapolation value entered in the ''Interpolation Options'' dialog. The figure below shows a network of t

Global parameters for a storm drain analysis are defined in the ''Job Control'' dialog. ...ifferent kinds of storm drain analysis can be performed. Option 2 is Storm only and uses the rational method (peak flow analysis) to generate the flows for

...ccessed by double-clicking on the EVT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: ...rray-baseed input with be used. Select to specify to use array-based input in the EVT package.

...ccessed by double-clicking on the WEL package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: ...dash; Allow boundary names. Turn on to allow boundary names to be included in the list of river cells.

...erves. Over the past several decades kriging has become a fundamental tool in the field of geostatistics. ...random variable and a completely deterministic variable in that it varies in a continuous manner from one location to the next and therefore points that

...ccessed by double-clicking on the WEL package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: **''PRINT_INPUT'' &ndash; Print input to listing file. If turned on, indicates that the list of lake inform

{{hide in print| ...me file and, when the project is saved, GMS lists the unsupported packages in the name file and copies the unsupported package files from the old directo

The following parameters are specified in the ''model setup'' tab: ** ''Full print output'' &ndash; Path and name of printed output file.

...nd alone window for a hydrograph, are accessed by right-clicking the mouse in the plot window. ...to a printer. Exporting can be to an image or text file and can be placed in a file or sent to the Windows clipboard for pasting.

...ccessed by double-clicking on the WEL package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: **''BOUNDNAMES'' &ndash; Turn on to allow boundary names to be included in the list of well cells.

...llows exporting the plot data to the desired format. The dialog is reached in the following ways: * Clicking the '''Export...''' button in the [[WMS:Customization Dialog|''Customization...'' dialog]].

...ccessed by double-clicking on the MAW package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: **''PRINT_INPUT'' &ndash; Print input to listing file. Print input to listing file. If turned on, indicates that the list of multi-aquif

Many commands in WMS are can be accessed using keyboard shortcuts. Shortcuts for standard menu commands are listed in the table below.

...the program so that all display option and default values match the values in the "settings" file. This command should be selected when a new modeling pr ...s given with the option to specify another format type to use when reading in the file. Data from the file is added to the current data base and SMS upda

...of the standard menus and is available in all of the modules. The commands in the ''File'' menu are used for file input and output for the WMS file types The following commands are contained in the ''File'' menu:

...ceptual model]] is constructed and a grid has been created, the final step in converting a conceptual model to a MODFLOW numerical model is to select the #Select the '''New Simulation''' command in the ''MODFLOW'' menu.

...S will write the file in the correct format based on the options specified in the [[WMS:MODRAT Job Control Parameters|Job Control]]. ...for MODRAT to access the data correctly. The format of the hydrograph data in this file is standard MODRAT hydrograph file format.

...ccessed by double-clicking on the SFR package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: **''PRINT_INPUT'' &ndash; Print input to listing file. Turn on to write the list of streamflow routing info

...of the stratigraphic layers defined by a set of solids. The steps involved in using the '''Solids &rarr; Layered Mesh''' command are as follows: ...s and each quadrilateral in the [[GMS:2D Mesh Module|2D mesh]] will result in a column of 3D hexahedral elements. The 2D mesh can be refined around well

...LC, CONS, HTRCH, SEDTRN, RQUAL. To activate a module, click the toggle box in the ''Reach/Reservoir Activity'' dialog box. This will activate the button ...able. For information on the definition and function of specific variables in this module, see Section 4.4(3).2 &ndash; HYDR Input of the HSPF Manual.[ht

Many commands in SMS can be accessed using keyboard shortcuts. Shortcuts for standard menu commands are listed in the table below.

...sing the ''Detention Basin'' calculator. This same calculator is also used in to define detention basin parameter input for HEC-1, the Rational Method an ...ervoir parameters. Using the principle of conservation of mass, the change in reservoir storage, ''S'', for a given time period, ''&Delta;t'', is equal t

...ccessed by double-clicking on the MVT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: ...or every stress period time step that has been specified by "BUDGET PRINT" in Output Control. If ''PRINT_FLOWS'' has been specified but there is no Outpu

...when reading MODFLOW Head files. The file is added to the MODFLOW solution in the Project Explorer. ##Print Layout

...llows exporting the plot data. The dialog is reached through the '''Export/Print''' command when right-clicking on an active plot. In this section, select where SMS will send the plot data when exporting.

The controls in the ''General'' tab include model description, FESWMS version, run controls ...d at the top of the FESWMS input files. The network file (*.net) includes only the network stamp but the bc file includes both the network stamp and the b

...article describes how to use the standard MODFLOW parameterization method in GMS. ==Support in GMS==

...to more accurately match the model domain and be more efficiently refined in areas where more accuracy is desired. {{only in print|[[Image:Switching_MF2K5.jpg|200px|none|thumb|left|MODFLOW Global Option Dia

...a [[SMS:STWAVE|STWAVE]] model. The [[SMS:STWAVE|STWAVE]] interface exists in the [[SMS:Cartesian Grid Module|Cartesian Grid module]]. ...tions include time controls, run types, output options, global parameters, print options and other global settings.

...'''shift''' key can be used to select multiple hydrographs to be displayed in the same plot window. :# Right-click in the hydrograph plot window.

...ge for MODFLOW 6 provided with GMS is still being developed and may change in the future. Newer versions of the package may not be compatible with older <!--*''Print_Input'' &ndash; Print input to listing file.

}}</ref> It is included in MODFLOW 2000 and GMS includes an interface to it starting at version 7.0. ...mediate points that must be defined is one less than the number of segments in the variable interval. For each intermediate point, two values, PXDP and PE

...of the standard menus and is available in all of the modules. The commands in the ''Display'' menu are as follows: ; Frame Image : Adjusts the view so that all currently visible objects fit in the [[GMS:The_GMS_Window#Graphics_Window|Graphics Window]].

...E4 file. The ''MODFLOW DE4 Solver'' package dialog will show the variables in the DE4 file. Variables include: ...mount of memory used by the package. Prints the actual number of equations in the upper part when the package runs.

...Parameters'']] dialog and then clicking on a ''Job Control'' related card in the text display window. *''Beginning Time'' &ndash; The beginning time of the simulation is defined in this entry. The time should be specified as a single integer number definin

...Demo Mode on any computer and it can be freely distributed. To enable the print and save functions, either a password or a hardware lock is needed. ...efore any files can be saved or printed. Before registration, GMS will run in Community Edition.

{{hide in print|Starting at GMS version 8.2, GMS supports MODFLOW-NWT.}} MODFLOW-NWT is a {{only in print|[[Image:Switching_MF2K5.jpg|200px|none|thumb|left|MODFLOW Global Option Dia

...dow]] depends on the current tool. The following table describes the tools in the 3D grid tool palette. ...ro may be entered in any of the i, j or k fields indicating that all cells in that direction will be selected. (See Note)}}

...ccessed by double-clicking on the IMS package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: ...of convergence information from the solver. Turn on to make the following print options available from the drop-down:

...erves. Over the past several decades kriging has become a fundamental tool in the field of geostatistics. ...random variable and a completely deterministic variable in that it varies in a continuous manner from one location to the next and therefore points that

...to 0, the model runs with English units. If it is set to 1, the model runs in metric units. SMS saves the SI card based on the coordinate system (project '''Q:''' What cards need to be used in RMA4?

...S#Modules|module]] or [[GMS:What_Is_GMS#Numerical Models|numerical model]] in use. {{only in print|&nbsp;[[Image:Tree_General.jpg|200px|right]]}}

...ues for each [[GMS:Stress Periods|stress period]] for each vertical column in the grid. The values consist of an elevation, an ET extinction depth, and a {{hide in print|

...an [[SMS:ADCIRC|ADCIRC]] model. The [[SMS:ADCIRC|ADCIRC]] interface exists in the [[SMS:Mesh Module|2D Mesh Module]]. ...tions include time controls, run types, output options, global parameters, print options and other global settings.

...ccessed by double-clicking on the UZF package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: **''PRINT_INPUT'' &ndash; Print input to listing file. Turn on to write the list of UZF information to the

...eating, editing and debugging a FESWMS model. The FESWMS interface exists in the [[SMS:Mesh Module|Mesh module]]. ...rols (steady state/dynamic), run types, output options, global parameters, print options and other global settings.

There are several toolbars that can be displayed in the GMS interface. Below are the toolbars that are on by default. *'''Print''' [[File:Print Icon.svg|16 px]] &ndash; Brings up the ''Print'' dialog, allowing the contents of the Graphics Window to be printed to any

...nd horizontal wells that can be affected by the effects of dynamic changes in the distribution of pumping or intraborehole flow that can significantly al ...OW Conceptual Model Approach|conceptual model]] MNW2 points can be defined in the [[GMS:Map Module|map module]].

...ion from the XMS Main Graphics Window to be assembled and exported for use in reports and presentations. Below is a brief explanation of the macros, tools, and menus found in the ''Layout Editor'' dialog.

...execution of CGWAVE. The parameter description for each field is displayed in SMS using the interactive help messages. ...ident Wave Conditions'' section specifies wave conditions to be simulated in a run. See [[SMS:CGWAVE Incident Wave Conditions|CGWAVE Incident Wave Condi

...storage values to be changed as a step function between stress periods or in a continuous manner through a transient simulation. ...' &ndash; Print flag determining how much information the TVM package will print to the listing file.

...MODFLOW]] uses the conductance to determine the amount of water that flows in or out of the model due to the boundary condition stresses. When using a [[GMS:Conceptual Model|conceptual model]], the manner in which the conductance term should be computed and entered depends on whethe

...ing, editing, and debugging a RMA2 model. The TABS (RMA2) interface exists in the [[SMS:Mesh Module|Mesh module]]. SMS can visualize and create RMA2 proj ...rols (steady state/dynamic), run types, output options, global parameters, print options and other global settings.

...associated with a modeling project. The Project Explorer manages the data in multiple ways, including creation of new data objects, deleting data object ...roject can be saved with a new name. Currently, projects can only be saved in the *.hy8 file format.

...to be solved for often change only slightly in their algebraic properties. In these cases the LMG3 solver can accelerate the overall simulation run enorm The [[GMS:LMG1_Package|LMG1 package]] is only supported in GMS versions prior to 8.0.

[[File:ADCIRC Simulation.png|thumb|175 px|Example of an ADCIRC simulation in the Project Explorer]] Simulations are available for ADCIRC starting in SMS 13.0. A simulation should contain a 2D mesh and an ADCIRC boundary cond

|model_type= Finite element water quality transport numerical model in which the depth concentration distribution is assumed uniform. It computes ...ting the physical processes of migration and mixing of a soluble substance in reservoirs, rivers, bays, estuaries and coastal zones. The model is useful

...ned in the cross section, so snapping to a TIN is best done before filling in the cross sections. ...the cross section and an arc (polyline) has been created for each segment in the boreholes.

...ccessed by double-clicking on the OBS package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: **''PRINT_INPUT'' &ndash; Print input to listing file. Indicates that the list of information will be writt

...n just using the standard runoff coefficient (based on percent impervious) in the rational equation. Complex reach routing is also factored into the dete The ''OC Rational'' menu, in the Hydrologic Modeling module, has the following commands:

[[File:STWAVE simulation.png|thumb|175 px|Example of an STWAVE simulation in the Project Explorer]] Simulations are available for STWAVE starting in SMS 13.0. A simulation should contain a 2D grid and a spectral coverage, an

* Print File (*.prt) &ndash; A summary printed output file that reports on the stat ...e shoals related to the inlet. One IRV file will be created for each inlet in the simulation.

[[File:ADCIRC Simulation.png|thumb|175 px|Example of an ADCIRC simulation in the Project Explorer]] Simulations are available for ADCIRC starting in SMS 13.0. A simulation should contain a 2D mesh and an ADCIRC boundary cond

...ccessed by double-clicking on the HFB package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options: **''PRINT_INPUT'' &ndash; Print input to listing file. Turn on to write the list of flow barrier informatio

{{hide in print|'''''Prior to version 9.0 this command and dialog were called "Convergence ...the '''''PEST ASP Package''''' (Advanced Spatial Parameterization) command in the ''MODFLOW'' | ''Optional Packages'' menu. The options are as follows:

...e being edited, select the desired item in the Project Explorer. The items in the ''Contour Options'' dialog are as follows: ...option selected from this menu affects the availability of other features in this dialog.

...Plot Wizard Macro.svg|16 px]] macro. The list of currently available plots in the ''Plot Wizard'' is shown below. All of the plots listed below are asso ...shown, and other pertinent information. Each plot's options are described in more detail by click on the ''Plot Type'' links above.

...13.2 and later. Simulations are useful as multiple simulations can be used in the same project. ...selecting ''New Simulation'' | '''CMS-Wave'''. The simulation will appear in the Project Explorer under the "Simulation Data" item.

...aph analysis is used for watersheds greater than 1 square mile (640 acres) in Orange County, California. Losses are accounted for by calculating an effec The ''OC Hydrograph'' menu, available in the '''Hydrologic Modeling Module''' [[File:Hydrologic Module Icon.svg|12 p