SMS:Attributes in the Feature Objects Menu

Feature object attributes are dependent on the coverage type. If a feature object has attributes, the attributes are edited by selecting the feature object and then selecting the menu command Feature Objects | Attributes or select Attributes from the right-click mouse menu. An Attibutes dialog will appear with options for the specific selected feature object in relation to the coverage type containing the feature object.

Feature Point Attributes

The following coverages can apply attributes to points or nodes.

Generic Coverage Point Types

• Observation – Uses the Observation Coverage dialog.
• Spectral – Uses the Spectral Energy dialog.
• Stamping – Uses the Stamping Point Attributes dialog.

Model Coverage Point Types

• ADCIRC – Uses the Refine Attributes dialog.
• ADH
  • ADH – Use the ADH Boundary Condition Assignment dialog.
  • Vessel – Use the Vessel Node Properties dialog.
• BOUSS-2D
  • Wavemaker – Uses the BOUSS-2D Wave Generator Properties dialog.
• CGWAVE – Uses the Refine Attributes dialog.
• CMS-Flow
  • Save Points – Uses the Assign Save Points dialog.
• CMS-Wave – Uses the Refine Attributes dialog.
• FESWMS – Uses the 'FESWMS Point/Node Attributes dialog.
• GenCade – Uses the Refine Attributes dialog.
• Generic Model – Uses the Feature Point/Node Attributes dialog.
• PTM
  • PTM – Uses the Feature Object Attributes dialog.
  • Gages – Uses the PTM Gage Attributes dialog.
• SRH-2D
  • Obstructions – Uses the Obstructions dialog.
• TABS – Uses the Feature Point/Node Options dialog.
• TUFLOW
  • 1D Network – Uses the Node Attributes dialog.
  • 1D Water Level Points – Uses the Materials Data dialog.
  • 1D–2D BCs and Links – Uses the Boundary Conditions dialog.
  • 2D Flow Constriction Shape – Uses the Flow Constriction Point dialog.
  • 2D Z Lines (advanced) – Uses the Point Attributes dialog.

Feature Arc Attributes

The following coverages can apply attributes to arcs.

Generic Coverage Arc Types

• Mapping – Uses the Arc Attributes dialog.
• Observation – Uses the Observation Coverage dialog.
• Stamping – Uses the Stamping Arc Attributes dialog.

Model Coverage Arc Types

• ADCIRC – Uses the ADCIRC Arc/Nodestring Attributes dialog.
• ADH
  • ADH – Use the ADH Boundary Condition Assignment dialog.
• BOUSS-2D – Uses the Cartesian Grid Arc Options dialog.
• BOUSS Runup/Overtopping
  • Probes – Uses a Arc Attributes dialog.
  • Damping – Uses a Damping Properties dialog.
  • Porosity – Uses a Porosity Properties dialog.
  • Transects – Uses the XY Series Editor.
  • Wave Maker – Uses the BOUSS-2D Wave Generator Propertise dialog.
• CGWAVE – Uses the CGWAVE Boundary Conditions dialog.
• CMS-Flow
  • Boundary Conditions – Uses the Arc Boundary Conditions dialog.
• FESWMS – Uses the Feature Arc Attributes dialog.
• GenCade – Uses the GenCade Arc Attributes dialog.
• Generic Model – Uses the Feature Arc Attributes dialog.
• PTM
  • PTM – Uses the Feature Object Attributes dialog.
• SRH-2D
  • Boundary Conditions – Uses the SRH-2D Linear BC dialog.
  • Obstructions – Uses the Obstructions dialog.
• TABS – Uses the '"Feature Arc Attributes dialog.
• TUFLOW
  • 1D Cross Section – Uses the TUFLOW Cross Section dialog.
  • 1D Network – Uses the Channel Attributes dialog.
  • 1D Water Level Lines – Uses the Water Level Arc Attributes dialog.
  • 1D–2D BC and Links – Uses the Boundary Conditions dialog.
  • 1D/2D Connections – Uses the Arc Attributes dialog.
  • 2D Flow Constriction Shape – Uses the Flow Constriction Attributes dialog.
  • 2D Grid Extents – Uses the Cartesian Grid Arc Options dialog.
  • 2D Z Lines (advanced) – Uses the Z Shape dialog.
  • 2D Z Lines/Polygons (simple) – Uses the Choose Arc Type dialog.
  • 2D/2D Linkage –

Polygon Attributes

The following coverages can apply attributes to polygons.

Generic Coverage Polygon Types

• Area Property – Uses the Land Polygon Attributes dialog.
• Mesh Generator – Uses the 2D mesh Poylgon Properties dialog.
• Mapping – Uses a Polygon Attributes dialog.
• Quadtree Generator – Uses a Polygon Attributes dialog.

Model Coverage Polygon Types

• ADCIRC – Uses the 2D Mesh Polygon Properties dialog.
• ADH
  • ADH – Uses the 2D Mesh Polygon Properties dialog.
• BOUSS-2D – Use the Polygon Attributes dialog.
• BOUSS Runup/Overtopping
  • Roughness – Uses the Roughness dialog.
• CGWAVE – Uses the 2D Mesh Polygon Properties dialog.
• FESWMS – Uses the 2D Mesh Polygon Properties dialog.
• Generic Model – Uses the 2D Mesh Polygon Properties dialog.
• PTM
  • PTM – Use the Feature Objects Attributes dailog.
• SRH-2D
  • Materials – Uses the Assign Material Properties dialog.
  • Sediment Materials – Uses the Assign Material Properties dialog.
• TABS – Uses the 2D Mesh Polygon Properties dialog.
• TUFLOW
  • 1D–2D BC and Links – Uses the Boundary Conditions dialog.
  • 2D Flow Constriction Shape – Uses the Flow Constriction Attributes dialog.
  • 2D Flow Constriction (cell based) – Uses the Flow Constrictions dialog.
  • 2D Grid Extents – Uses the Polygon Attributes dialog.
  • 2D Miscellaneous (FLC, WRF, IWL, SRF and AD) – Uses a Polygon Properties dialog for the coverage property type.
  • 2D Z Lines/Polygons (simple) – Uses the Polygon Elevation dialog.
  • 2D/2D Linkage – Uses the Select TUFLOW Grid dialog.
• WAM – Uses the Polygon Attributes dialog.

Related Topics

• Feature Objects Menu