WMS:Define Flood Inundation Polygon: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 5: Line 5:
== Help ==
== Help ==


Selecting the '''define flood inundation polygon''' button allows you to create arcs that represent your flood inundation boundary.  Normally, you should use the roadway as one of the arcs and build arcs for the rest of the inundation boundary.  If you select '''delete flood inundation polygon''' and then click on an arc or inside that polygon, the polygon is deleted and all the generic arcs (not the roadway centerline arcs) making up that polygon are deleted from memory.  Selecting '''build polygons''' builds all the polygons in the HY-8 coverage and assigns them as flood inundation polygons without prompting whether you want to use all the arcs to build polygons.
Selecting the '''define flood inundation polygon''' button allows the user to create arcs that represent the flood inundation boundary.  Normally, use the roadway as one of the arcs and build arcs for the rest of the inundation boundary.  If the user selects '''delete flood inundation polygon''' and then click on an arc or inside that polygon, the polygon is deleted and all the generic arcs (not the roadway centerline arcs) making up that polygon are deleted from memory.  Selecting '''build polygons''' builds all the polygons in the HY-8 coverage and assigns them as flood inundation polygons without prompting to use all the arcs to build polygons.


{{WMSHy8ModWizard}}
{{WMSHy8ModWizard}}
{{WMSMain}}
{{WMSMain}}
[[Category:WMS To HY8|D]]
[[Category:WMS To HY8|D]]

Revision as of 14:09, 16 September 2014

HY8 Modeling Wizard showing the Define Flood Inundation Polygon step.

The Define Flood Inundation Polygon step is used to define a flood inundation polygon if a drainage coverage with a polygon defining the inundation area does not already exist. You need to define a flood inundation polygon for any culvert crossings with no outlets (and no basin polygons) assigned but with a hydrograph. The purpose of this inundation polygon is to compute a storage capacity curve and to define a flood barrier when running the floodplain delineation.

Help

Selecting the define flood inundation polygon button allows the user to create arcs that represent the flood inundation boundary. Normally, use the roadway as one of the arcs and build arcs for the rest of the inundation boundary. If the user selects delete flood inundation polygon and then click on an arc or inside that polygon, the polygon is deleted and all the generic arcs (not the roadway centerline arcs) making up that polygon are deleted from memory. Selecting build polygons builds all the polygons in the HY-8 coverage and assigns them as flood inundation polygons without prompting to use all the arcs to build polygons.