WMS:Storage Capacity Data: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 5: Line 5:
== Help ==
== Help ==


This step in the wizard lists all the crossings in the HY-8 coverage and allows you to define storage capacity data for each of the crossings.  The elevation-volume curve is defined from the DEM and the outlet/watershed boundary or the flood inundation polygon associated with the crossing.  The elevations are defined from the headwater elevations in the HY-8 analysis.  Alternatively, geometry of the area can be defined and the elevation-volume curve can be computed from this geometry or an elevation-area curve can be defined and the volume can be computed from this curve (a fourth option is that the storage can be entered directly into the storage capacity data dialog).  When clicking on the '''Define''' button from the wizard, the ''Storage Capacity Input'' dialog appears, shown below:
This step in the wizard lists all the crossings in the HY-8 coverage and allows the user to define storage capacity data for each of the crossings.  The elevation-volume curve is defined from the DEM and the outlet/watershed boundary or the flood inundation polygon associated with the crossing.  The elevations are defined from the headwater elevations in the HY-8 analysis.  Alternatively, geometry of the area can be defined and the elevation-volume curve can be computed from this geometry or an elevation-area curve can be defined and the volume can be computed from this curve (a fourth option is that the storage can be entered directly into the storage capacity data dialog).  When clicking on the '''Define''' button from the wizard, the ''Storage Capacity Input'' dialog appears, shown below:


[[Image:StorageCapacityInput.png|thumb|none|left|300 px|''Storage Capacity'' dialog.]]
[[Image:StorageCapacityInput.png|thumb|none|left|300 px|''Storage Capacity'' dialog.]]


In this dialog, you will be able to select the option to use your DEM (this is the default if a DEM exists) to compute your volumes at each water surface elevation.  Alternatively, you can enter the geometry of the basin upstream of the culvert or an elevation-area curve.  If the ''Known Area'' option is selected, you will be allowed to manually enter the area at each of the headwater elevations computed by HY-8.
In this dialog, the user will be able to select the option to use the DEM (this is the default if a DEM exists) to compute the volumes at each water surface elevation.  Alternatively, a user can enter the geometry of the basin upstream of the culvert or an elevation-area curve.  If the ''Known Area'' option is selected, the user will be allowed to manually enter the area at each of the headwater elevations computed by HY-8.


After exiting the define storage dialog, the ''Detention Basin Analysis'' dialog shows the elevation-storage-discharge chart in an ''FHWA Hydraulic Toolbox'' dialog and allows you to view and edit the routed hydrograph and its associated data:
After exiting the define storage dialog, the ''Detention Basin Analysis'' dialog shows the elevation-storage-discharge chart in an ''FHWA Hydraulic Toolbox'' dialog and allows viewing and editing the routed hydrograph and its associated data:


[[Image:DetentionBasinAnalysis.png|thumb|none|left|375 px|''Detention Basin Analysis'' dialog.]]
[[Image:DetentionBasinAnalysis.png|thumb|none|left|375 px|''Detention Basin Analysis'' dialog.]]

Revision as of 14:15, 16 September 2014

HY8 Modeling Wizard showing the Storage Capacity Data step.

The Storage Capacity Data step is used to define storage capacity data and to route the hydrograph at the outlet through the culvert.

Help

This step in the wizard lists all the crossings in the HY-8 coverage and allows the user to define storage capacity data for each of the crossings. The elevation-volume curve is defined from the DEM and the outlet/watershed boundary or the flood inundation polygon associated with the crossing. The elevations are defined from the headwater elevations in the HY-8 analysis. Alternatively, geometry of the area can be defined and the elevation-volume curve can be computed from this geometry or an elevation-area curve can be defined and the volume can be computed from this curve (a fourth option is that the storage can be entered directly into the storage capacity data dialog). When clicking on the Define button from the wizard, the Storage Capacity Input dialog appears, shown below:

Storage Capacity dialog.

In this dialog, the user will be able to select the option to use the DEM (this is the default if a DEM exists) to compute the volumes at each water surface elevation. Alternatively, a user can enter the geometry of the basin upstream of the culvert or an elevation-area curve. If the Known Area option is selected, the user will be allowed to manually enter the area at each of the headwater elevations computed by HY-8.

After exiting the define storage dialog, the Detention Basin Analysis dialog shows the elevation-storage-discharge chart in an FHWA Hydraulic Toolbox dialog and allows viewing and editing the routed hydrograph and its associated data:

Detention Basin Analysis dialog.