WMS:GSSHA Nutrients: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(13 intermediate revisions by 2 users not shown)
Line 1: Line 1:
To model nutrients using GSSHA:
{{TOC right}}
#Toggle on the ''Nutrients'' option in the ''Job Control''.<br>
The GSSHA ''Nutrients'' dialog is accessed by turning on ''Nutrients'' in the other options section of the [[WMS:GSSHA Job Control|''GSSHA Job Control Parameters'' dialog]], then clicking '''Edit parameters...''' to the right of the option. The following tabs are found in this dialog:
#:[[File:NutrientsJobControl.jpg|thumb|none|left|600 px|''GSSHA Job Control Parameters'' dialog with the ''Nutrients'' option selected.]]
*''Point Sources''
#Open the ''Nutrients'' dialog to view the four nutrient tabs: ''Point Sources'', ''Non Point Sources'', ''Other'', and ''Uniform Properties.''  Enter nutrient concentrations in the Other tab. These concentrations will be applied to rainfall input. The ''Uniform'' properties tab contains default values for uniform nutrient properties.  It's possible to adjust these values.<br>
*''Non-Point Sources''
#:[[File:NutrientsDialogOther.jpg|thumb|none|left|450 px|''Nutrients'' dialog showing the ''Other'' tab.]]
*''Other''
#:[[File:NutrientsDialogUniformProperties.jpg|thumb|none|left|450 px|''Nutrients'' dialog showing the ''Uniform Properties'' tab.]]
*''Uniform Properties''
#Create stream and grid index maps.  At least one stream and one grid index map is required for nutrient setup.<br>
#:[[File:GSSHAStreamIndexMap.jpg|thumb|none|left|300 px|''GSSHA Maps'' dialog showing the ''Index &ndash; Stream'' tab.]]
#Set up the initial conditions for the stream and grid index maps using the Nutrients map tables in the [[WMS:GSSHA Mapping Tables|GSSHA Map Table dialog]]. The following map tables are supported:
#*Aquatic kinetic constants
#*Dispersion
#*Nitrogen initial conditions
#*Phosphorus initial conditions
#*Carbon initial conditions
#*Other initial conditions
#*Soil nitrogen initial conditions
#*Soil phosphorus initial conditions
#*Soil carbon initial conditions
#*Soil uptake rates
#*Soil/water partitioning
#*Groundwater nitrogen initial conditions
#*Groundwater phosphorus initial conditions
#*Groundwater other initial conditions
#Turn on any nutrient related output options in the ''Output Control'' dialog to view the desired datasets.
#If wanting to define Point Sources or Non-Point Sources, select the ''Nutrients'' button in the '''GSSHA Job Control''' dialog.  If defining non-point sources, define a grid-based or a stream-based index map associated with the non-point source.  If defining a point source, determine the ''I, J'' index of the cell if defining an overland point source or the ''Link, Node'' index if defining a stream point source.  The I, J can be determined from the grid cell properties in the Properties window.  The Link number can be determined by turning on the link number display option and viewing the link numbers in the WMS graphics window.  Whether defining a point or non-point contaminant source, define a mass curve or a concentration curve for any contaminant source to be modeled.


Other important troubleshooting notes:
The following buttons are found at the bottom of the GSSHA ''Nutrients'' dialog:
*GSSHA nutrients can only be modeled in long-term simulations
*'''Help''' &ndash; Opens this article in a web browser.
*The contaminants option must be turned on with at least one contaminant in order for nutrients to run.  In this case, all contaminant parameters can be left at 0.
*'''OK''' &ndash; Saves all changes and closes the GSSHA ''Nutrients'' dialog.
*Turn on the initial depth option in the job control and specify an initial depth for any initial condition nutrient mapping tables to have any effect
*'''Cancel''' &ndash; Discards all changes and closes the GSSHA ''Nutrients'' dialog.
*A project must have at least one ID for all nutrient mapping tables for nutrients to run properly, even if the values for some IDs are all 0.


==Related Topics==
==General==
* [[WMS:GSSHA Maps|GSSHA Maps]]
There are a number of things that should be kept in mind regarding GSSHA nutrients
*GSSHA nutrients can only be modeled in [[WMS:Long Term Simulation Dialog|long-term simulations]].
*Create [[WMS:GSSHA Maps#Stream Index Maps|stream]] and [[WMS:GSSHA Maps#Grid Index Maps|grid index maps]]. At least one stream and one grid index map is required for nutrient setup.
*The contaminants option must be turned on with at least one contaminant in order for nutrients to run. Contaminant parameter values can be left at "0", if desired.
*A project must have at least one ID for all [[WMS:GSSHA Mapping Tables#Nutrients|nutrient mapping tables]] for nutrients to run properly, even if the values for some IDs are all "0".
*Turn on ''Initial depth'' in the ''Overland flow'' section of the [[WMS:GSSHA Job Control|''GSSHA Job Control Parameters'' dialog]] and specify an initial depth for any initial condition [[WMS:GSSHA Mapping Tables#Nutrients|nutrient mapping tables]] to have any effect.
*Turn on any nutrient related output options in the [[WMS:GSSHA Output Control|''GSSHA Output Control'' dialog]] to view the desired output datasets.
*Set up the initial conditions for the stream and grid index maps using the ''Nutrients'' map tables in the [[WMS:GSSHA Mapping Tables|''GSSHA Map Table'' dialog]]. The following map tables are supported:
**[[WMS:GSSHA Mapping Tables#Aquatic kinetic constants|Aquatic kinetic constants]]
**[[WMS:GSSHA Mapping Tables#Dispersion|Dispersion]]
**[[WMS:GSSHA Mapping Tables#Nitrogen initial conditions|Nitrogen initial conditions]]
**[[WMS:GSSHA Mapping Tables#Phosphorous initial conditions|Phosphorous initial conditions]]
**[[WMS:GSSHA Mapping Tables#Carbon initial conditions|Carbon initial conditions]]
**[[WMS:GSSHA Mapping Tables#Other initial conditions|Other initial conditions]]
**[[WMS:GSSHA Mapping Tables#Soil nitrogen initial conditions|Soil nitrogen initial conditions]]
**[[WMS:GSSHA Mapping Tables#Soil phosphorous initial conditions|Soil phosphorous initial conditions]]
**[[WMS:GSSHA Mapping Tables#Soil carbon initial conditions|Soil carbon initial conditions]]
**[[WMS:GSSHA Mapping Tables#Soil uptake rates|Soil uptake rates]]
**[[WMS:GSSHA Mapping Tables#Soil water partitioning|Soil/water partitioning]]
**[[WMS:GSSHA Mapping Tables#Groundwater nitrogen initial conditions|Groundwater nitrogen initial conditions]]
**[[WMS:GSSHA Mapping Tables#Groundwater phosphorous initial conditions|Groundwater phosphorous initial conditions]]
**[[WMS:GSSHA Mapping Tables#Groundwater other initial conditions|Groundwater other initial conditions]]


{{GSSHAMain
==Point Sources==
[[File:GSSHA Nutrients dialog Point Sources tab.png|thumb|right|450px|The ''Point Sources'' tab in the GSSHA ''Nutrients'' dialog.]]
Point sources, such as that from a discharge pipe, are defined on the ''Point Sources'' tab. When defining point sources, determine the ''I, J'' index of the cell if defining an overland point source, or the ''Link, Node'' index if defining a stream point source. The ''I, J'' index can be determined from the grid cell properties in the Properties section of the [[WMS:Graphical User Interface#Main Graphics Window|Main Graphics Window]]. The link number can be determined by turning on the link number display on the ''Map'' tab under "Map Data" in the [[WMS:Display Options|''Display Options'' dialog]].


|PLinks=
For any contaminant source being modeled as a point source, a mass curve or a concentration curve must be defined in order to be selectable from the drop-downs for each contaminant. These must be entered separately from the non-point source curves.


|GUMLinks=
The ''Type'' drop-down has the following options:
* [http://gsshawiki.com/index.php?title=Constituents:Nutrient_Sub_Module_(NSM)_Constituents,_Project_Cards NSM Project Cards]
*"All" &ndash; Displays all point sources.
* [http://gsshawiki.com/index.php?title=Constituents:Nutrient_Sub_Module_(NSM)_Constituents,_Aquifer_Environment_File NSM Aquatic Kinetic Constants]
*"Overland" &ndash; Displays only overland point sources.
* [http://gsshawiki.com/index.php?title=Constituents:Point_and_Non-point_sources Point/Non-point Sources]
*"Stream" &ndash; Displays only stream point sources.
* [http://gsshawiki.com/index.php?title=Mapping_Table:NSM_Grid-based_Mapping_Tables NSM Map Tables]


}}
The ''Show'' drop-down has the following options:
*"All" &ndash; Shows all of the selected ''Type''.
*"Selected" &ndash; Shows only those of the selected ''Type'' that are selected in the Main Graphics Window.
 
The following buttons appear on the ''Point Sources'' tab:
*'''Add''' &ndash; Adds a new point source to the spreadsheet on this tab.
*'''Delete''' &ndash; Immediately deletes the selected point source.
*'''Mass Curves...''' &ndash; Opens the [[WMS:XY Series Editor|''XY Series Editor'' dialog]] to allow defining of a mass curve.
*'''Concentration Curves...''' &ndash; Opens the [[WMS:XY Series Editor|''XY Series Editor'' dialog]] to allow defining of a concentration curve.
 
The spreadsheet has the following rows:
*''Name'' &ndash; Alphanumeric field. Enter the name of the point source.
*''Type'' &ndash; A drop-down with the following options:
**"Overland" &ndash; Select if the point source is an overland source.
**"Stream" &ndash; Select if the point source is a stream source.
*''I / Link'' &ndash; The ''I'' coordinate (for an overland source) or the link number (for a stream).
*''J / Node'' &ndash; The ''J'' coordinate (for an overland source) or the node number (for a stream)
*''Flow'' &ndash; A drop-down of all available point source concentration curves.
*''Nitrite (NO2-)'' &ndash; A drop-down of all available point source mass and concentration curves.
*''Nitrate (NO3-)'' &ndash; A drop-down of all available point source mass and concentration curves.
*''Ammonium NH4+'' &ndash; A drop-down of all available point source mass and concentration curves.
*''Organic Nitrogen (ON)'' &ndash; A drop-down of all available point source mass and concentration curves.
*''Organic Phos. (OP)'' &ndash; A drop-down of all available point source mass and concentration curves.
*''Diss Phosphorous (DP)'' &ndash; A drop-down of all available point source mass and concentration curves.
*''Phosphate (PO4)'' &ndash; A drop-down of all available point source mass and concentration curves.
*''Algae (Alg)'' &ndash; A drop-down of all available point source mass and concentration curves.
*''CBOD'' &ndash; A drop-down of all available point source mass and concentration curves.
*''Dissolved Oxygen (DO)'' &ndash; A drop-down of all available point source mass and concentration curves.
 
==Non-Point Sources==
[[File:GSSHA Nutrients dialog Non-Point Sources tab.png|thumb|right|450px|The ''Non-Point Sources'' tab in the GSSHA ''Nutrients'' dialog.]]
Non-point sources, such as rainfall, are defined on the ''Non-Point Sources'' tab. When defining non-point sources, define a [[WMS:GSSHA Maps#Grid Index Maps|grid]] or [[WMS:GSSHA Maps#Stream Index Maps|stream index map]] associated with the non-point source. For any contaminant source being modeled as a non-point source, a mass curve or a concentration curve must be defined in order to be selectable from the drop-downs for each contaminant. These must be entered separately from the point source curves.
 
The ''Type'' drop-down has the following options:
*"All" &ndash; Displays all non-point sources.
*"Overland" &ndash; Displays only overland non-point sources.
*"Stream" &ndash; Displays only stream non-point sources.
 
The ''Show'' drop-down has the following options:
*"All" &ndash; Shows all of the selected ''Type''.
*"Selected" &ndash; Shows only those of the selected ''Type'' that are selected in the Main Graphics Window.
 
The following buttons appear on the ''Point Sources'' tab:
*'''Add''' &ndash; Adds a new non-point source to the spreadsheet on this tab.
*'''Delete''' &ndash; Immediately deletes the selected non-point source.
*'''Mass Curves...''' &ndash; Opens the [[WMS:XY Series Editor|''XY Series Editor'' dialog]] to allow defining of a mass curve.
*'''Concentration Curves...''' &ndash; Opens the [[WMS:XY Series Editor|''XY Series Editor'' dialog]] to allow defining of a concentration curve.
 
The spreadsheet has the following rows:
*''Name'' &ndash; Alphanumeric field. Enter the name of the non-point source.
*''Type'' &ndash; A drop-down with the following options:
**"Overland" &ndash; Select if the non-point source is an overland source.
**"Stream" &ndash; Select if the non-point source is a stream source.
*''Index Map'' &ndash; A drop-down of all available index maps in the GSSHA project.
*''Rainfall'' &ndash; Turn on if the non-point source is rainfall.
*''Flow'' &ndash; A drop-down of all available non-point source concentration curves.
*''Nitrite (NO2-)'' &ndash; A drop-down of all available non-point source mass curves.
*''Nitrate (NO3-)'' &ndash; A drop-down of all available non-point source mass curves.
*''Ammonium NH4+'' &ndash; A drop-down of all available non-point source mass curves.
*''Organic Nitrogen (ON)'' &ndash; A drop-down of all available non-point source mass curves.
*''Organic Phos. (OP)'' &ndash; A drop-down of all available non-point source mass curves.
*''Diss Phosphorous (DP)'' &ndash; A drop-down of all available non-point source mass curves.
*''Phosphate (PO4)'' &ndash; A drop-down of all available non-point source mass curves.
*''Algae (Alg)'' &ndash; A drop-down of all available non-point source mass curves.
*''CBOD'' &ndash; A drop-down of all available non-point source mass curves.
*''Dissolved Oxygen (DO)'' &ndash; A drop-down of all available non-point source mass curves.
 
==Other==
[[File:WMS GSSHA Nutrients dialog Other tab.png|thumb|right|450 px|''Nutrients'' dialog showing the ''Other'' tab.]]
The ''Other'' tab allows nutrient concentrations to be entered. These concentrations will be applied to rainfall input.
 
The following rows appear in the spreadsheet on this tab:
*''Temperature (C)'' &ndash; A decimal value in degrees Celsius.
*''Channel pH'' &ndash; A decimal pH value.
*''Nitrite, NO2'' &ndash; A decimal value in milligrams per liter.
*''Nitrate, NO3'' &ndash; A decimal value in milligrams per liter.
*''Ammonium, NH4'' &ndash; A decimal value in milligrams per liter.
*''Organic nitrogen, ON'' &ndash; A decimal value in milligrams per liter.
*''Organic phosphorous, OP'' &ndash; A decimal value in milligrams per liter.
*''Dissolved phosphorous, DP'' &ndash; A decimal value in milligrams per liter.
*''Phsphate, PO4'' &ndash; A decimal value in milligrams per liter.
*''Algae'' &ndash; A decimal value in milligrams per liter.
*''Carbonaceous biochemical oxygen demand, CBOD'' &ndash; A decimal value in milligrams per liter.
*''Dissolved oxygen, DO'' &ndash; A decimal value in milligrams per liter.
*''Dissolved organic carbon, DOC'' &ndash; A decimal value in milligrams per liter.
*''Fraction organic carbon in DOC'' &ndash; A decimal percentage value.
 
Below this point, any additional contaminants created in the [[WMS:GSSHA Contaminants|''GSSHA Contaminants'' dialog]] will be listed.
{{-}}
==Uniform Properties==
[[File:WMS GSSHA Nutrients dialog Uniform Properties tab.png|thumb|right|450 px|''Nutrients'' dialog showing the ''Uniform Properties'' tab.]]
The ''Uniform Properties'' tab contains user-editable default values for uniform nutrient properties. KOC is "the 'distribution coefficient' (Kd) normalized to total organic carbon content.<ref>{{cite web|<!--url=https://apps.ecology.wa.gov/clarc/FocusSheets/Physical&ChemicalParameters.htm--> |title=Notes on Chemical-Specific Parameters – Physical and Chemical Properties |publisher=State of Washington Department of Ecology |accessdate=16 May 2019|archivedate=16 May 2019|archiveurl=http://www.webcitation.org/78QGmhE4j |deadurl=no}}</ref> KM (the Michaelis constant) is "the substrate concentration at which the reaction rate is half of its maximal value".<ref>{{cite web|url=https://www.uniprot.org/help/biophysicochemical_properties |title=Biophysicochemical properties |publisher=Uniprot Consortium |accessdate=16 May 2019 |archivedate=16 May 2019 |archiveurl=http://www.webcitation.org/78QH5PvSP |deadurl=no}}</ref>
*''NO2_KOC''
*''NO2_KM''
*''NO3_KOC''
*''NO3_KM''
*''NH4_KOC''
*''NH4_KM''
*''ON_KOC''
*''ON_KM''
*''OP_KOC''
*''OP_KM''
*''DP_KOC''
*''DP_KM''
{{-}}
 
==References==
{{reflist}}
 
 
{{GSSHA Wiki}}
{{WMSMain}}


[[Category:GSSHA|N]]
[[Category:GSSHA|N]]
[[Category:GSSHA Dialogs]]
[[Category:GSSHA Dialogs|Nut]]

Latest revision as of 15:45, 26 July 2024


The GSSHA Nutrients dialog is accessed by turning on Nutrients in the other options section of the GSSHA Job Control Parameters dialog, then clicking Edit parameters... to the right of the option. The following tabs are found in this dialog:

  • Point Sources
  • Non-Point Sources
  • Other
  • Uniform Properties

The following buttons are found at the bottom of the GSSHA Nutrients dialog:

  • Help – Opens this article in a web browser.
  • OK – Saves all changes and closes the GSSHA Nutrients dialog.
  • Cancel – Discards all changes and closes the GSSHA Nutrients dialog.

General

There are a number of things that should be kept in mind regarding GSSHA nutrients

Point Sources

The Point Sources tab in the GSSHA Nutrients dialog.

Point sources, such as that from a discharge pipe, are defined on the Point Sources tab. When defining point sources, determine the I, J index of the cell if defining an overland point source, or the Link, Node index if defining a stream point source. The I, J index can be determined from the grid cell properties in the Properties section of the Main Graphics Window. The link number can be determined by turning on the link number display on the Map tab under "Map Data" in the Display Options dialog.

For any contaminant source being modeled as a point source, a mass curve or a concentration curve must be defined in order to be selectable from the drop-downs for each contaminant. These must be entered separately from the non-point source curves.

The Type drop-down has the following options:

  • "All" – Displays all point sources.
  • "Overland" – Displays only overland point sources.
  • "Stream" – Displays only stream point sources.

The Show drop-down has the following options:

  • "All" – Shows all of the selected Type.
  • "Selected" – Shows only those of the selected Type that are selected in the Main Graphics Window.

The following buttons appear on the Point Sources tab:

  • Add – Adds a new point source to the spreadsheet on this tab.
  • Delete – Immediately deletes the selected point source.
  • Mass Curves... – Opens the XY Series Editor dialog to allow defining of a mass curve.
  • Concentration Curves... – Opens the XY Series Editor dialog to allow defining of a concentration curve.

The spreadsheet has the following rows:

  • Name – Alphanumeric field. Enter the name of the point source.
  • Type – A drop-down with the following options:
    • "Overland" – Select if the point source is an overland source.
    • "Stream" – Select if the point source is a stream source.
  • I / Link – The I coordinate (for an overland source) or the link number (for a stream).
  • J / Node – The J coordinate (for an overland source) or the node number (for a stream)
  • Flow – A drop-down of all available point source concentration curves.
  • Nitrite (NO2-) – A drop-down of all available point source mass and concentration curves.
  • Nitrate (NO3-) – A drop-down of all available point source mass and concentration curves.
  • Ammonium NH4+ – A drop-down of all available point source mass and concentration curves.
  • Organic Nitrogen (ON) – A drop-down of all available point source mass and concentration curves.
  • Organic Phos. (OP) – A drop-down of all available point source mass and concentration curves.
  • Diss Phosphorous (DP) – A drop-down of all available point source mass and concentration curves.
  • Phosphate (PO4) – A drop-down of all available point source mass and concentration curves.
  • Algae (Alg) – A drop-down of all available point source mass and concentration curves.
  • CBOD – A drop-down of all available point source mass and concentration curves.
  • Dissolved Oxygen (DO) – A drop-down of all available point source mass and concentration curves.

Non-Point Sources

The Non-Point Sources tab in the GSSHA Nutrients dialog.

Non-point sources, such as rainfall, are defined on the Non-Point Sources tab. When defining non-point sources, define a grid or stream index map associated with the non-point source. For any contaminant source being modeled as a non-point source, a mass curve or a concentration curve must be defined in order to be selectable from the drop-downs for each contaminant. These must be entered separately from the point source curves.

The Type drop-down has the following options:

  • "All" – Displays all non-point sources.
  • "Overland" – Displays only overland non-point sources.
  • "Stream" – Displays only stream non-point sources.

The Show drop-down has the following options:

  • "All" – Shows all of the selected Type.
  • "Selected" – Shows only those of the selected Type that are selected in the Main Graphics Window.

The following buttons appear on the Point Sources tab:

  • Add – Adds a new non-point source to the spreadsheet on this tab.
  • Delete – Immediately deletes the selected non-point source.
  • Mass Curves... – Opens the XY Series Editor dialog to allow defining of a mass curve.
  • Concentration Curves... – Opens the XY Series Editor dialog to allow defining of a concentration curve.

The spreadsheet has the following rows:

  • Name – Alphanumeric field. Enter the name of the non-point source.
  • Type – A drop-down with the following options:
    • "Overland" – Select if the non-point source is an overland source.
    • "Stream" – Select if the non-point source is a stream source.
  • Index Map – A drop-down of all available index maps in the GSSHA project.
  • Rainfall – Turn on if the non-point source is rainfall.
  • Flow – A drop-down of all available non-point source concentration curves.
  • Nitrite (NO2-) – A drop-down of all available non-point source mass curves.
  • Nitrate (NO3-) – A drop-down of all available non-point source mass curves.
  • Ammonium NH4+ – A drop-down of all available non-point source mass curves.
  • Organic Nitrogen (ON) – A drop-down of all available non-point source mass curves.
  • Organic Phos. (OP) – A drop-down of all available non-point source mass curves.
  • Diss Phosphorous (DP) – A drop-down of all available non-point source mass curves.
  • Phosphate (PO4) – A drop-down of all available non-point source mass curves.
  • Algae (Alg) – A drop-down of all available non-point source mass curves.
  • CBOD – A drop-down of all available non-point source mass curves.
  • Dissolved Oxygen (DO) – A drop-down of all available non-point source mass curves.

Other

Nutrients dialog showing the Other tab.

The Other tab allows nutrient concentrations to be entered. These concentrations will be applied to rainfall input.

The following rows appear in the spreadsheet on this tab:

  • Temperature (C) – A decimal value in degrees Celsius.
  • Channel pH – A decimal pH value.
  • Nitrite, NO2 – A decimal value in milligrams per liter.
  • Nitrate, NO3 – A decimal value in milligrams per liter.
  • Ammonium, NH4 – A decimal value in milligrams per liter.
  • Organic nitrogen, ON – A decimal value in milligrams per liter.
  • Organic phosphorous, OP – A decimal value in milligrams per liter.
  • Dissolved phosphorous, DP – A decimal value in milligrams per liter.
  • Phsphate, PO4 – A decimal value in milligrams per liter.
  • Algae – A decimal value in milligrams per liter.
  • Carbonaceous biochemical oxygen demand, CBOD – A decimal value in milligrams per liter.
  • Dissolved oxygen, DO – A decimal value in milligrams per liter.
  • Dissolved organic carbon, DOC – A decimal value in milligrams per liter.
  • Fraction organic carbon in DOC – A decimal percentage value.

Below this point, any additional contaminants created in the GSSHA Contaminants dialog will be listed.

Uniform Properties

Nutrients dialog showing the Uniform Properties tab.

The Uniform Properties tab contains user-editable default values for uniform nutrient properties. KOC is "the 'distribution coefficient' (Kd) normalized to total organic carbon content.[1] KM (the Michaelis constant) is "the substrate concentration at which the reaction rate is half of its maximal value".[2]

  • NO2_KOC
  • NO2_KM
  • NO3_KOC
  • NO3_KM
  • NH4_KOC
  • NH4_KM
  • ON_KOC
  • ON_KM
  • OP_KOC
  • OP_KM
  • DP_KOC
  • DP_KM


References

  1. ^ "Notes on Chemical-Specific Parameters – Physical and Chemical Properties". State of Washington Department of Ecology. 
  2. ^ "Biophysicochemical properties". Uniprot Consortium. https://www.uniprot.org/help/biophysicochemical_properties. Retrieved on 16 May 2019.