WMS:GSSHA Storm Drain

From XMS Wiki
Revision as of 22:04, 30 April 2019 by Jmonson (talk | contribs) (Created page with "The "GSSHA Storm Drain" coverage in WMS is used to hold feature arcs, nodes, and polygons related to subsurface drainage network or agricultural tile drain modeling. ==Storm...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

The "GSSHA Storm Drain" coverage in WMS is used to hold feature arcs, nodes, and polygons related to subsurface drainage network or agricultural tile drain modeling.

Storm/Tile Drain Dialog

The GSSHA Storm/tile drain dialog.

The GSSHA Storm/tile drain dialog has three options:

  • Allow GSSHA to redistribute Superlink Vertices – Turn on to allow GSSHA to redistribute superlink vertices.
  • Groundwater flow computation method section
    • "Cooke Method (default)" – Uses the Cooke Method for calculating [1]
    • "" –

References

  1. ^ Cooke, Richard A.; Badiger, Shrinivas M.; García, Ana Maria (June 21, 2001). "Drainage equations for random and irregular tile drainage systems". Agricultural Water Management 48 (3): 207-224. Archived from the original. You must specify the date the archive was made using the |archivedate= parameter. https://www.sciencedirect.com/science/article/pii/S0378377400001360.