WMS:GSSHA Batch Mode/Stochastics Dialog: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(Created page with "{{TOC right}} The ''GSSHA Batch Mode/Stochastics'' dialog is accessible by clicking the '''Edit parameters...''' button to the right of ''Stochastic'' in the list of other par...")
 
Line 29: Line 29:
**"Uniform" –  
**"Uniform" –  
**"Beta" – Selecting "Beta" brings up the [[#Beta Distribution Shape Factors Dialog|''Beta Distribution Shape Factors'' dialog]].
**"Beta" – Selecting "Beta" brings up the [[#Beta Distribution Shape Factors Dialog|''Beta Distribution Shape Factors'' dialog]].
*''Min'' –  
*''Min'' – A decimal value.
*''Max'' –  
*''Max'' – A decimal value.
*''Log'' –  
*''Log'' – Turn on to
*''Num Segments'' – An integer value. Accessible when ''Latin Hypercube (LHS)'' is selected in the ''Batch Setup'' section.
*''Num Segments'' – An integer value. Accessible when ''Latin Hypercube (LHS)'' is selected in the ''Batch Setup'' section.
*''Run X'' – The the quantity of ''Run 1'', ''Run 2'', etc., rows is controlled by the ''Number of instances'' field in the ''Batch Setup'' section.  
*''Run X'' – The the quantity of ''Run 1'', ''Run 2'', etc., rows is controlled by the ''Number of instances'' field in the ''Batch Setup'' section.  
Line 41: Line 41:
*''Shape Factor "b"'' – An integer value.
*''Shape Factor "b"'' – An integer value.
{{-}}
{{-}}
==Batch Setup==
==Batch Setup==
The ''Batch Setup'' section has the following options:
The ''Batch Setup'' section has the following options:

Revision as of 16:13, 1 May 2019


The GSSHA Batch Mode/Stochastics dialog is accessible by clicking the Edit parameters... button to the right of Stochastic in the list of other parameters in the GSSHA Job Control Parameters dialog. The Help... button at the bottom of the dialog opens this page in a web browser.

The dialog has the following sections:

  • Parameter List
  • Batch Setup
  • Model Selection
  • Stochastic Parameters

Parameters

The GSSHA Batch Mode/Stochastics dialog.

The Parameter List section contains a spreadsheet with the following rows:

  • Name – A WMS-assigned name for the parameter. Not user editable.
  • Key
  • Type – A drop-down list with the following options:
    • "Capil. Hd." – Sets the type to "capillary head".
    • "Hyd. Con." – Sets the type to "hydraulic conductivity".
    • "Init. Moist." – Sets the type to "initial moisture".
    • "Area Reduct." – Sets the type to "area reduct".
    • "Manning" – Sets the type to "Manning", a Manning's n value.
    • "Porosity" – Sets the type to "porosity".
    • "Precip." – Sets the type to "precip".
    • "Roughness Exp." – Sets the type to "roughness exponent".
  • Std. Deviation – Enter a standard deviation value in decimal form.
  • Mean Value – Enter a mean value in decimal form.
  • Histogram – Clicking the Dot dot dot button.png to bring up the Stochastic Histogram dialog, where a histogram can be viewed. The Number of Intervals can be specified at the bottom of the dialog.
  • Distribution – A drop-down list with the following options:
  • Min – A decimal value.
  • Max – A decimal value.
  • Log – Turn on to
  • Num Segments – An integer value. Accessible when Latin Hypercube (LHS) is selected in the Batch Setup section.
  • Run X – The the quantity of Run 1, Run 2, etc., rows is controlled by the Number of instances field in the Batch Setup section.

Beta Distribution Shape Factors Dialog

The Beta Distribution Shape Factors dialog.

The Beta Distribution Shape Factors dialog has a single Shape Factors section with the following options:

  • Shape Factor "a" – An integer value.
  • Shape Factor "b" – An integer value.


Batch Setup

The Batch Setup section has the following options:

  • Number of instances – This field controls the number of Run rows in the spreadsheet in the Parameter List section. It is recommended to use no more than 10,000 instances as it will significantly impact the speed of the simulation run time.
  • Sampling Method – Includes the following radio button options:
    • Monte Carlo
    • Latin Hypercube (LHS) – Reveals the Num Segments row in the Parameter List spreadsheet and disables direct editing of the Number of instances option.
    • User Defined – Disables and/or hides the Mean Value and Distribution rows in the Parameter List spreadsheet and the Repopulate Runs button in the Stochastic Parameters section.

Model Selection

The Model Selection section has the following options:

  • Select a model – A drop-down list with the following options:
    • GSSHA – Select to use the GSSHA model.
    • CE-QUAL-W2 – Select to use the CE-QUAL-W2 model.

Stochastic Parameters

The Stochastic Parameters section has the following buttons:

  • Add Parameter – Adds a new column to the Parameter List spreadsheet.
  • Delete Parameter – Immediately deletes the selected column from the Parameter List spreadsheet.
  • Delete All Parameters – Immediately deletes all columns from the Parameter List spreadsheet.
  • Repopulate Runs – Repopulates the data in the Run rows in the Parameter List spreadsheet.