Search results

...l of the modules. The commands in the ''Help'' menu are to assist in using WMS. ; WMS Help : Accesses the [[WMS:WMS|WMS Wiki]] if an internet connection is available.

...er formats, as GIS data layers in WMS. These data can then be converted to WMS feature objects in map coverages. * [[WMS:Introduction to ArcObjects#Enabling ArcObjects|Enabling ArcObjects]]

[[Image:WMS XY SeriesEditor.jpg|thumb|none|left|600 px|Example of the ''XY Series Edito * [[WMS:DSS Files|DSS Files]]

...rd guides the user through setting up the application on each system. Once WMS is installed, default settings can be adjusted and saved. ...stallation process, make sure the computer meets the [[System Requirements|WMS System Requirements]].

...neation and time of concentration calculations from feature objects (see [[WMS:Lag Time and Time of Concentration|Lag Time and Time of Concentration]]), m This section describes the mechanics of the WMS interface to TR-55 and is not a complete reference to the methodology, uses

...lues, Fm or Ybar) from the unit rainfall (Orange County IDF curves). The [[WMS:Rational_Method_Computing_Hydrographs#Rational_Hydrograph|Rational unit hyd # Exit all dialogs and select the hydrograph icon to view the runoff hydrograph

...tal elevation data can be formatted in the same way and then imported into WMS using the '''Open''' command in the ''File'' menu. This will bring up the ' [[Image:WMS Import ArcInfo Grid.jpg|thumb|none|left|350 px|''Importing ArcInfo Grid'' d

...s described in the information on [[WMS:River Tools|River Tools]] in the [[WMS:Map Module|Map module]]. :* [[WMS:Hydraulic Modeling|Hydraulic Modeling]]

Breakline options option are controlled in the [[WMS:TIN Options|'''TIN Options''']] of the ''TINs'' menu. This dialog allows sp * [[WMS:Triangulation|Edge Swapping]]

...[[WMS:Introduction to ArcObjects#Enabling ArcObjects|enable ArcObjects]]. WMS uses the feature objects stored in each coverage to build the geodatabase. ...erence in the geodatabase is defined from the current coordinate system in WMS.

#:[[File:WMS HEC RAS MP.png|150 px]] When WMS writes the SMPDBK input file, average roughness values are computed based o

[[File:WMS Model Wrapper Dialog.png|thumb|right|550px|''Model Wrapper'' dialog]] The ''Model Wrapper'' dialog in WMS is used to display what is happening during a model run. The following info

{{Version WMS 11.2}} ...MS 11.2! This page lists the exciting new features that have been added to WMS 11.2.

WMS allows defining the watershed as a single basin or subdivide the watershed ...g the appropriate travel time. If desired, use a time computation arc to [[WMS:Lag Time and Time of Concentration|compute the travel time]].

To use [[WMS:Display Options|Display Options]] in WMS, use the following steps: ...f the window, or click the [[WMS:Display Options|'''Display Options''']] [[WMS:Macros|'''macro''']].

{{WMS Deprecated Feature}} * [[WMS:1D-HYD Centerline Coverage Type|1D-Hydraulic Centerline Coverage]]

...t data to run one of the supported models can be defined using a series of dialogs. This module is used for interfacing to hydrologic models and for the const ...ed with all [http://www.aquaveo.com/software/wms-pricing paid editions] of WMS. [[Category:Link to Store]] This module is the primary module available for

The drainage module has a number of tools to edit feature objects. The dialogs can be reached by double-clicking on feature object or by selecting the fea [[Image:WMS Drainage Feature Arc Type.png|thumb|175 px|Drainage ''Feature Arc Type'' di

...read the solution back into WMS by opening the HMS DSS solution file from WMS. ...e the DSS file to view is located. Open the DSS file and a [[WMS:DSS Files-WMS Interface|dialog]] like the following will show up.

...lready exist. In order to take advantage of this type data when available, WMS allows hydrologic models to be built directly from three different features ...would have to be determined by some other means and defined in appropriate dialogs prior to running one of the supported hydrologic models).

...ow is calculated. Once all of the items listed in this window are entered, WMS performs the calculation for peak discharge and displays the result in the ...55 does not require that basin names are unique, other models supported by WMS do.

...tc. Also enter variable names corresponding to the basin data computed by WMS, or enter variables that to define. The variable definition is displayed an * [[WMS:Travel Times from Basin Data|Travel Times from Basin Data]]

* [[WMS:DSS Files|DSS Files]] * [[WMS:XY Series Files|XY Series Files]]

Like the other models supported by WMS, the Rational Method can be defined for a watershed/catchment developed fro **[[WMS:Rational Method Rainfall Intensity|Compute I – IDF Curves]]

...emperatures''', and '''Define precipitation concentrations''' buttons open dialogs to add precipitation and its temperature and constituent concentrations to ...ad concentrations''' buttons become active. Selecting these buttons opens dialogs that specify the elevations, temperatures, and concentrations of the extern

* '''F_m''' – Maximum area [[WMS:OC Losses|loss rate]] * [[WMS:OC Losses|Losses]]

...on of MODRAT input data. Furthermore, MODRAT can be launched directly from WMS through menu options. These menus can be found in the Hydrologic Modeling m * [[WMS:MODRAT#Saving_and_Reading_MODRAT_Files|'''Save MODRAT File''']] – Sa

[[Image:WMS Display Options 2D Grid.jpg|thumb|500 px|''Display Options'' dialog showing *The ''Nodes'' item is used to display grid nodes. Since all grids in WMS 7.0 are cell-centered, a dot is displayed at the cell centers.

...tionality in WMS that is available in ArcView®, but this is only providing WMS is running on a computer that has a current license of ArcView®. Without a .... If a license is not found then the ArcView® functions remain dimmed, but WMS is able to do many of the same things, the primary limitation being that on

...he first six plot types are related to the two-dimensional runoff model, [[WMS:GSSHA|GSSHA]], where a series of results for the finite difference grid, an [[File:WMS PlotWizard2.jpg|thumb|none|400 px|Step 2 of the ''Plot Wizard'' using the M

The ''XY Series Editor'' is used in GMS, SMS, and WMS. It was designed to be general in nature so that it could be used anywhere * [[WMS:WMS|WMS main page]]

* [[WMS:1D-HYD Cross Section Coverage Type|Cross Section Coverage]] * [[WMS:Area Property Coverage|Area Property Coverage]]

...nting to start over with HSPF input or wanting to use another model within WMS. ...ntains input for the simulation, these files should be merged for use with WMS. The filename fields complete the data necessary for the FILES block of HSP

...lso available directly from within many of the hydrologic model parameter dialogs where time of concentration, lag time, or routing travel time is needed. ...re time computation types and methods can be selected. This dialog has a [[WMS:Customizing Equations|'''Modify Equation''']]and a '''User Defined''' optio

The control option data entered in WMS is exported to the HMS project and used to set the appropriate HMS paramete The basin option data entered in WMS is exported to the HMS project and used to set the appropriate HMS paramete

#redirect [[Projection Dialogs]] ...each projection and the information in these dialogs can be found in the [[WMS:Projections]] article.

...urve dialog.png|right|thumb|The ''Detention Basin Rating Curve'' dialog in WMS.]] [[Category:GSSHA Dialogs|Detention]]

[[Image:WMS Coverage Overlay.jpg|thumb|275 px|''Coverage Overlay'' dialog]] ...ing the basins. These values are often needed for computations using the [[WMS:NSS|National Streamflow Statistics]] (NSS) program of regional regression e

...e to enable importing, exporting, viewing, and editing DSS files inside of WMS. ...d edit a DSS file. This dialog comes up when reading a DSS file from the [[WMS:XY Series Editor|XY Series Editor]] or from the '''Open''' command in the '

...ative WMS Files]] for a list. For files that are not included in the list, WMS provides the ''File Import Wizard''. ...iated by pasting data from a text file or spreadsheet into WMS using the [[WMS:Edit Menu#Paste|Paste]] command from the ''Edit'' menu.

...w WMS automatically rounds elevations values when a DEM is imported. See [[WMS:Smoothing DEMs|Smoothing DEMs]] for more information. * '''Trim''' – See [[WMS:Editing DEMs|Editing DEMs]] for more information on the ''Trim'' commands.

...n an inflow hydrograph can be analyzed and an output hydrograph created in WMS using the ''Detention Basin'' calculator. This same calculator is also used # A [[WMS:Hydrographs|hydrograph]].

*[[WMS:Basin HEC-1 Cards|Basin HEC-1 Cards]] *[[WMS:Routing HEC-1 Cards|Routing HEC-1 Cards]]

...in and then choosing the '''Unit Hydrograph Method...''' button from the [[WMS:Orange County Unit Hydrograph|''Edit Orange County Unit Hydrograph Paramete Clicking on '''OK''' will write the unit hydrograph data to the [[WMS:Basin HEC-1 Cards#Derived Unit Hydrograph (UI)|UI]] card for analysis using

[[Image:WMS Exporting Plot Data.jpg|thumb|375 px|''Exporting'' dialog]] * Clicking the '''Export...''' button in the [[WMS:Customization Dialog|''Customization...'' dialog]].

...water.usgs.gov/software/HSPF/]). The ''Assign External Sources'' dialog in WMS has been developed to allow setting up the required external sources for an ...s''' is present in each of the [[WMS:HSPF Modules|HSPF module dialogs]] in WMS. Upon clicking this button, the ''Assign External Sources'' dialog box is a

...[[WMS:HEC-HMS Gages|''User Gage Weighting'']] option is selected in the [[WMS:HEC-HMS Defining the Meteorological Model|''HMS Meteorological Model'' dial ...s the points in an XMRG file to incremental distribution rain gages in a [[WMS:Rain_Gage|rain gage coverage]]. These gages can then be tied to a basin in

...sections, a prompt will ask for the name of a cross section database file. WMS stores all of the cross section information in a text database file. The cr * [[WMS:Editing Cross Sections|Editing Cross Sections]]

...of weirs, outlets, and standpipes along with their individual parameters. WMS will then compute an elevation discharge relationship with an appropriate e ...levation-discharge computations for this crossing are then assigned to the WMS Elevation Discharge relationship. The hydrograph is routed based on the HY

* [[WMS:OC Rational Sub-area Data|Sub-area Data]] * [[WMS:OC Rational Reach Routing|Reach Routing]]

...fall event, and are primarily a function of the geometry of the watershed. WMS provides two powerful methods of computing travel times for lag time and ti ...ost of these equations are a function of the [[WMS: Variables Computed by WMS|geometric parameters computed from digital terrain models]].

[[Image:WMS DEM Trim by Elevation.png|thumb|225 px|''DEM Trim by Elevation'' dialog]] [[Image:WMS DEM TrimArea.png]] [[Image:WMS DEM trimmed.png]]

...ction 4.6.4.2 of the HSPF manual[http://water.usgs.gov/software/HSPF/]. In WMS, a list of mass links may be created for each segment type: PERLND, IMPLND, * [[WMS:HSPF|Overview of HSPF]]

...nded to the nearest hydrograph value for the standard version of TR-55. In WMS hydrographs are determined by linear interpolation between two hydrographs ...he peak flows from these two different methods will usually be different. WMS uses the method described in Exhibit 5 in the TR-55 manual to compute a hyd

* [[WMS:TR-20|TR-20 Overview]] * [[WMS:TR-20 Job Control Parameters|Entering Job Control Parameters]]

#Load the *.tif, or *.jpg image into WMS and [[Registering an Image|register]] according to the latitude and longitu * [[WMS:NSS|NSS Model]]

While future versions of WMS may be able to process some commands directly from the GIS data layers, cur ...and make sure that it has an attribute set of Soil Type. After making sure WMS will be mapping to the correct coverage, select the polygons which overlay

...d with each feature in the layer (as rows). Tables cannot be edited within WMS; this is only a way to explore and discover the nature of the database asso ...IS data layer on the hard drive of the computer, it only exists within the WMS application.

* [[WMS:Contour Options|WMS Contour Options]] [[Category:SMS Display Dialogs]]

...ng, it's necessary to link the appropriate soil type variables to each ID. WMS allows completing this in one of two ways. First of all, with the soil type Parameter values for soil type IDs are defined by selecting the ID in the WMS soil type ID text window and the parameter from the selected soil type prop

A Land Use coverage in WMS has a different purpose depending on the model and/or model parameters assi ...necessary to link the appropriate land use variables to each land use ID. WMS allows completing this in one of two ways. First of all, with the land use

The toolbar for the WMS [[WMS:GIS Module|GIS module]] has a variety of tools useful for selecting objects ...ributes of the selected feature in the top most layer (as displayed in the WMS Project Explorer) are displayed, but the ''Layers'' drop down combo can be

...hannel routing. Structures are defined in the same way as structures for [[WMS:TR-20 Reservoir Data|reservoir routing]]. ...is diverted. For this method, define what this constant outflow is. Also [[WMS:TR-20 Routing Data#Defined Cross Sections|define a cross section]] and the

* [[WMS:SMPDBK|Simplified Dam-Break Analysis]] * [[WMS:Interpolating Hydraulic Model Results|Interpolate Results]]

...possible to enter surveyed cross sections, however in order to use them in WMS for floodplain delineation, or modeling of any kind they must be georeferen *Line Prop Types – By default, WMS uses only a Material ID, but other properties could be defined for general

...asin and then choosing the '''Effective Precipitation''' button from the [[WMS:Orange County Unit Hydrograph|''Edit Orange County Unit Hydrograph Paramete ...ick on the '''Compute Mountainous''' button if a DEM or TIN exists to have WMS calculate the amount of mountainous terrain in the sub-area.

...already defined. To set up a groundwater model in [[WMS:GSSHA|GSSHA]] with WMS, do the following: :#Interpolate the aquifer bottom data set to the 2D grid to create a new [[WMS:GSSHA_Maps#Grid_Continuous_Maps|continuous map]] for the aquifer bottom.

# The time of concentration can be computed outside of WMS and entered into the appropriate edit field. # The [[WMS:Travel Times from Basin Data|Compute Tc – Basin Data]] button can be

...r each basin, define one or more total storm gages and one recording gage. WMS has the capability to automatically determine gage weights for each sub-bas ..._Systems|coordinate system]]. The RADAR grids are read by selecting the [[WMS:HEC-HMS Convert Grids|'''Radar Data→Rain Gages''']] button and definin

Most of the data types ([[WMS:Modules|modules]]) in WMS have a set of display options that can be modified using the '''Display Opt ...r, or when selecting a color from within the ''Line or Symbol Attributes'' dialogs.

[[WMS:Display Menu|Display Menu]] [[Category:WMS 2D Grid|G]]

* [[WMS:OC Rational Sub-area Data|Sub-area Data]] * [[WMS:Orange_County_Rational_Method#Reports|Reports]]

...must be numbered and lettered properly, from most upstream to downstream. WMS will automatically number and letter the watershed components once a topolo ...orresponding to each lateral as prompted to do so in the dialog. Note that WMS will automatically skip numbers/letters at certain confluences to allow for

[[File:WMS SubsetDefinition.png|thumb|300 px|The ''Subset Definition'' dialog]] In the [[WMS:Inverse Distance Weighted Interpolation|''IDW Interpolation Options'']] dia

...r storage capacity curves, but the primary use of ''Plot Windows'' is to [[WMS:Hydrographs|display the hydrographs]] that result from hydrologic modeling ...and ''Save Settings'' menus will not perform any action within WMS. The [[WMS:Customization Dialog|'''Display Options''']] command will allow control of

{{WMS Deprecated Feature}} ...play in the WMS window according to this projection and any data mapped to WMS coverages will be mapped into the coordinate system specified by the ''Map

DEM files can be converted by WMS into TINs or feature objects. ...equired. More efficient ways of converting DEMs to a TIN include using a [[WMS:Creating TINs|bounding polygon]] and interior breakline arcs (i.e. streams

* [[WMS:GIS Tools|GIS Tool Palette]] * [[WMS:Mapping to Feature Objects|Mapping GIS Features to Feature Objects]]

[[File:WMS GSSHA Model Linkage dialog.png|thumb|right|380 px|''GSSHA Model Linkage'' d ...sible by clicking the '''Model Linkage...''' button at the bottom of the [[WMS:GSSHA Job Control|''GSSHA Job Control'' dialog]]. It allows linking the cur

...accessed by selecting a DEM point with the '''Select DEM Points''' [[File:WMS SelectDEMpointsTool.svg|13 px]] tool and choosing the '''Point Attributes'' ...ery tedious and should only be used for small local changes. If desired, [[WMS:Editing DEM Elevations|edit elevations]] using feature arcs if wanting to m

[[Image:WMS Tin Options.png|thumb|400 px|''TIN Options'' dialog]] ...ation of vertices should be done once digitizing vertices are completed. [[WMS:Creating TINs|See creating a TIN from a scanned image]] for more informatio

...he rainfall mass curves to be used by MODRAT. This file will be created by WMS—name it anything appropriate. ...th the ''Detention Basin Calculator'' in WMS, this file will be created by WMS – name it anything appropriate. If having manually created this file in t

...' window provides both information and opportunities to edit properties of WMS entities. ...For example, if selecting a feature polygon representing a basin boundary, WMS will also select the associated basin in the hydrologic tree.

...page is to explain how to obtain a registration code and enable WMS. When WMS is first launched, the following window appears: To get started using WMS, the software must be registered. Register WMS by choosing the '''Register...''' button. The following window will appear

...page is to explain how to obtain a registration code and enable WMS. When WMS is first launched, the following window appears: To get started using WMS, the software must be registered. Register WMS by choosing the '''Register...''' button. The following window will appear

...ious), and DPA zones are all available from the LACDPW. Once the map is in WMS, functions have been created which will overlay the parameter map on the wa ...ype data is present in WMS, compute and assign soil numbers using the '''[[WMS:Importing Shapefiles|Map Attributes]]''' command from the ''MODRAT'' menu.

...point or manually changing the flow direction can also be edited in the [[WMS:DEM Point Attributes|''DEM Point Attributes'']] dialog. * [[WMS:DEM Point Attributes|Point Attributes]]

WMS, beginning in version 9.1, uses ''Hydraulic Toolbox'' to perform the channe ...across a specified arc, as long as the user has elevation data loaded into WMS then turn on cross sections. The image showing channel geometry becomes upd

{{TOC right}}The "GSSHA Storm Drain" coverage in WMS is used to hold feature arcs, nodes, and polygons related to subsurface dra ...in a "GSSHA Storm Drain" coverage. This makes it so pipes drawn inside of WMS do not impact stream elevations in the "GSSHA" coverage.

=The Path of Data from WMS to HY8 in the HY8 Modeling Wizard= The HY8 Modeling Wizard in WMS gathers data to setup an HY8 model. Some data can be changed at multiple l

{{WMS Deprecated Feature}} [[Image:WMS FHWA Storm Drain JC.jpg|thumb|400 px|''FHWA Storm Drain Job Control'' dialo

[[File:WMS DynamicToolsQuick.png|thumb|right|The toolbar for the Terrain Data module.] The toolbar for the WMS [[WMS:Terrain Data Module|Terrain Data module]] has a variety of tools useful for

...in GSSHA requires turning on the ''Contaminant transport'' option in the [[WMS:GSSHA Job Control|''Job Control'' dialog]]. ...e one to be used with the contaminant. This can also be specified in the [[WMS:GSSHA Mapping Tables|''GSSHA Map Table Editor'' dialog]].

...IS data as Feature Objects, and tools for using them are included in the [[WMS:Map Module|Map Module]]. Feature object data can be used by itself to creat ...ese data are often already developed and stored in a GIS, importing from [[WMS:Importing Shapefiles|ARC/INFO® and ArcView®]], or DXF files is easily don

...h''' – One or more input hydrographs can be defined for a reservoir. WMS will combine any input hydrographs with other input hydrographs to the rese * [[WMS:TR-20|TR-20 Overview]]

...ould have been defined using WMS. If the simulation was not defined using WMS, define branch and segment coverages representing the branches and segments ...created when selecting the '''Map→CE-QUAL-W2 Grids''' menu command. WMS reads the solution values from the CE-QUAL-W2 snapshot files and the soluti

...ndaries''' command. The drainage basin boundaries option in the Drainage [[WMS:Display Options|''Display Options'']] dialog is automatically set when defi ...boundaries can be split using the '''Refine Boundaries''' command in the [[WMS:Drainage_Module_Menus#Drainage_TIN_Menu|''TIN'']] menu for the Drainage mod

A flood extent coverage is created from a [[WMS:Delineate Floodplain|flood delineation dataset]] and contains polygons show ...y showing the extent of a floodplain. These coverages can be exported from WMS for reporting or use with Geographic Information Systems (GIS) to perform o

...string crosses triangle edges, a prompt will ask if wanting to insert a [[WMS:TIN Breaklines|breakline]]. The breakline is inserted by creating new poin The '''Delete Stream Segments''' command (in the [[WMS:Drainage_Module_Menus#Drainage_TIN_Menu|''TIN'']] menu for the Drainage mod

...been loaded into WMS and can be used when running the WinTR-20 model from WMS. * [[WMS:TR-20|TR-20 Analysis]]

...h the basin. The name can not be more than six characters long. By default WMS uses the basin ID number followed by a "B" for the name, but a descriptive ...ndash; When a [[WMS:TIN Guidelines|TIN]], [[WMS:DEM Guidelines|DEM]], or [[WMS:Feature Object Guidelines|map-based]] model is present, basin areas and slo

...analysis is similar to the [[WMS:HEC-1 Parameters|HEC-1 interface]] within WMS. Some of the processes specific to Orange County are described below: * '''Open HEC-1 File''' – [[WMS:HEC-1#Reading_Existing_Files|Reads in]] existing HEC-1 files.

...is superior in all cases, several interpolation techniques are provided in WMS. [[Image:WMS 2D Interpolation Options.jpg|thumb|225 px|''2D Interpolation Options'' dial

The toolbar for the WMS [[WMS:Map Module|Map module]] has a variety of tools useful for editing and creat {{WMS Select Feature Point/Node}}

...nstream. Currently, this coverage only supports links and nodes for the [[WMS:SWMM|SWMM model]]. ...done this, define model specific data on the hydraulic schematic in the [[WMS:Project Explorer Contents for River Module|river module]].

Changing the preferences for the WMS interface can be done through the ''Preferences'' dialog. This dialog can b :[[File:WMS ProjectExplorer1.png]]

...ndividual basin segments as well as the area of the basin as calculated by WMS if a terrain model was used to calculate basin data. A radio group is locat * [[WMS:HSPF External Targets|WMS:HSPF External Targets]]

[[Image:WMS DEM Smoothing Options.png|thumb|225 px|''DEM Smoothing Options'' dialog]] ...read in the DEM can be smoothed using the '''Smooth''' command from the [[WMS:DEM Menu|''DEM'']] menu.

WMS includes an interface to the Orange County Rational Method which can be use All of the computations for peak flows and routing are done within WMS.

...in HMS. The results from these models can then be read into and viewed in WMS. WMS provides GIS, watershed modeling, and HMS parameter computation capabilitie

...cting the '''Dataset Calculator''' in the ''Edit'' menu. It is accessed in WMS by selecting the '''Data Calculator''' command from the ''Edit'' menu. The * [[WMS:Datasets|Datasets (WMS)]]

{{WMS Deprecated Feature}} [[Category:Projection Dialogs]]

* [[WMS:Orange County Rational Method|Orange County Rational Method]] [[Category:OC Rational Dialogs|T]]

...SHA Storm Drain)|''Properties'' dialog]]. This is only accessible when a [[WMS:GSSHA Storm Drain#GSSHA Storm Drain Coverage|GSSHA storm drain coverage]] i ...commended to add more than one pipe (two nodes) between superjunctions. In WMS, superlinks are represented as arcs and superjunctions are represented by t

This menu is available when a GSSHA coverage is the active coverage, or if WMS is switched to the '''Map''' [[File:Map Module Icon.svg|16px]] module. : Opens the [[WMS:Smooth GSSHA Streams#Stream Smoothing|''Smooth GSSHA Streams'' dialog]].

[[File:WMS DrawingToolsQuick.png|thumb|right|The Annotation toolbar.]] ; Select Drawing Objects : The '''Select Drawing Objects''' [[Image:WMS SelectDrawingObjectsTool.svg|15 px]] tool is used to select the previously

...n or lag time. If the equation is a function of a variable not computed by WMS then enter the value in this dialog before a travel time can be computed. T # [[WMS:Assigning an Equation|Select an equation]] (or create a new one).

...essed by turning on ''Soil erosion'' in the other options section of the [[WMS:GSSHA Job Control|''GSSHA Job Control Parameters'' dialog]] and clicking th ...map]] can be created that incorporates the sediment types as needed. The [[WMS:GSSHA Mapping Tables|''GSSHA Map Table Editor'' dialog]] can then be used t

...anizing all the datasets associated with the several models and modules in WMS. In the 2D Grid module, the Project Explorer serves to store and modify the ...rves as a manager for all of the gridded datasets that have been read into WMS. When other modules are active the Project Explorer references TINs, DEMs,

*[[WMS:1D-HYD Centerline Coverage Type|WMS 1D-HYD Centerline Coverage Type]] [[Category:SMS Map Dialogs|1D hyd]]

* [[WMS:OC Rational Sub-area Data|Sub-area Data]] [[Category:OC Rational Dialogs|I]]

...additional information on [[WMS:Importing USGS DEMs|importing DEMs]] and [[WMS:Importing Shapefiles|ArcView® Shapefiles]]. ...types listed below, several other types of data can be imported via the [[WMS:File Import Wizard|''File Import]] Wizard''.

#Assign a cross section from a database by double-clicking on an arc in a [[WMS:1D-HYD Cross Section Coverage Type|1D Hydraulic Cross Section]] coverage. A ...cross section database for editing (or create a new database) using the [[WMS:Managing Cross Sections|'''Manage Cross Sections''']] command.

...or by selecting the '''Delete''' command from the ''Edit'' menu. If the [[WMS:Edit Menu|''Confirm deletions'']] option is active, a prompt will ask to co ...g ''Vertices'' | '''Delete Duplicates''' from the ''TIN'' menu. Otherwise, WMS may abort when the vertices are triangulated. The tolerance for duplicate v

WMS automatically assigns the correct type (generic, link break, or junction) t ...pen a separate dialog. The options for feature arcs are described in the [[WMS:GSSHA Feature Arcs|GSSHA Feature Arcs]] article.

The '''Get Data''' [[File:WMS GetDataToolIcon.svg|16 px]] tool is used to get data from the web or from a ...for a community of users it is convenient to catalog the necessary files. WMS can read a database catalog and then automatically open any files that fit

...ed with all [http://www.aquaveo.com/software/wms-pricing paid editions] of WMS (10.1 comes with HEC-RAS 5.0.1). [[Category:Link to Store]] ...ormation on the tools and processes to set up a river schematic, see the [[WMS:Stochastic Modeling#Step 2. Develop a working model in HEC-RAS|1D River Hyd

* [[WMS:TR-20|TR-20 Overview]] * [[WMS:TR-20 Edit Parameters|Editing TR-20 Parameters]]

...red as part of the attributes of a feature point in the "GSSHA" and the "[[WMS:GSSHA Storm Drain|GSSHA Storm Drain]]" coverage types. Observations can be [[File:WMS GSSHA Observations dialog.png|thumb|right|600 px|''GSSHA Observations'' dia

* [[WMS:Contour Options|Contour Options]] * [[WMS:Contour Options#Contour Labels|Contour Labels]]

[[File:WMS Film Loop.png|thumb|400 px|Example of the ''Film Loop Setup'' wizard.]] One of the most powerful 2D visualization tools in WMS is animation. An animation sequence can be generated for a grid with a tran

WMS uses a third party set of DLLs to read CAD files. This is done so that WMS can stay current with evolving changes in DXF and other file formats. Previ WMS can use CAD files as base map (background) information to the project, and

[[File:WMS GSSHA Solution Analysis dialog.png|thumb|450 px|''GSSHA Solution Analysis'' ...t dot button.png|16px]] button in the ''Solution Results'' column in the [[WMS:GSSHA Feature Nodes#Properties Dialog|GSSHA feature points/nodes ''Properti

; TIN Options : Brings up the ''TIN Options'' dialog. See the article [[WMS:TIN Options|TIN Options]] for more information. ::[[Image:WMS Merge TINs.png|thumb|none|left|350 px|WMS ''Merge TINs'' dialog]]

...n be defined in WMS using the commands in the ''TR-20'' menu and resulting dialogs. ...ed with all [http://www.aquaveo.com/software/wms-pricing paid editions] of WMS. [[Category:Link to Store]]

The ''Registration Wizard'' dialogs for all of Aquaveo's products are very similar, so the following informatio *[[WMS:Registering WMS|Registering WMS]]

...then to run HSPF. The input parameters are linked to all the tools within WMS including automated basin delineation and parameter definition using a grap ...ed with all [http://www.aquaveo.com/software/wms-pricing paid editions] of WMS. [[Category:Link to Store]]

...for hydrologic analysis, HEC-RAS for 1D hydraulic river modeling, and the WMS floodplain delineation tools. :[[File:WMS StochasticModeling.jpg|thumb|none|left|300 px|]]

Output for several of the hydrologic models includes a hydrograph. WMS allows hydrographs to be displayed and compared. Multiple hydrographs can b The hydrograph should be selected prior to bringing up the [[WMS:Detention Basin Calculator|detention basin calculator]].

...nique name to each diversion in a given model because this name is used by WMS and by HEC-1 to identify the diversion. '''Define DI''' – Select to bring up the [[WMS:XY Series Editor|''XY Series Editor'' dialog]] and define inflow.

*''Soil texture'' – A drop-down list of [[WMS:List of SSURGO soil textures|all available SSURGO soil textures]] in the SS Because there are often missing fields in the data, this allows WMS to provide a default value to be assigned to missing fields to avoid blanks

...also be accessed by toggling on the display of Job Control cards in the [[WMS:HEC-1 Parameters|''Edit HEC-1 Parameters'']] dialog and then clicking on a .... This diagram should appear similar to the tree representation created by WMS.

...bration|automated]] and manual calibration. There is a [[WMS:WMS_Tutorials|WMS tutorial]] that describes how to set up a basic calibration model. ...'' column of the ''Feature Point/Node Properties'' dialog to display the [[WMS:GSSHA Solution Analysis|''Solution Analysis'']] dialog, which allows both v

In WMS, man-made embankments are represented as embankment arcs. These embankment ...evations can be generated by entering the parameters for a vertical curve. WMS will then take the given parameters and compute the correct elevation value

...1995) have developed methods to extract watershed geomorphology from DEMs. WMS includes many of these same tools. ...ncies, universities, or private data publishers. [[WMS:Importing USGS DEMs|WMS can read digital elevation]] in standard USGS (the older single file format

[[File:WMS GSSHA Calibration Output dialog.png|thumb|right|280 px|''GSSHA Calibration [[Category:GSSHA Dialogs|G]]

...ecipitation event. Rain gage files constructed using an editor outside of WMS can be used in two ways: #Reference the file in the [[WMS:Save GSSHA Project File|''Manage Files'' dialog]] when saving the GSSHA pro

...on to the right of ''Stochastic'' in the list of other parameters in the [[WMS:GSSHA Job Control|''GSSHA Job Control Parameters'' dialog]]. The '''Help... [[File:WMS GSSHA Batch Mode Stochastics Dialog.png|thumb|right|430px|The ''GSSHA Batch

...data. Using the '''IDF Curves…''' button (for either basins or outlets), WMS can be used to develop curves from either of these two data sources, statis The methods WMS uses to compute the IDF curve equations are discussed in Appendix A of [htt

...mulated in this way. Lake and wetland polygons are conceptually modeled in WMS in the GSSHA coverage. Lakes and wetlands must be used in conjunction with a [[WMS:GSSHA Hydraulic Structures#Hydraulic Structure Curves|rating curve]] (or ot

...most common alternative which WMS supports is [http://www.xmswiki.com/wiki/WMS:HEC-HMS HEC-HMS]. Other options for modeling dam breaks using Aquaveo softw ...e added to a [http://www.aquaveo.com/software/wms-pricing paid edition] of WMS. [[Category:Link to Store]]

[[Image:WMS Import ArcInfo Grid.jpg|thumb|none|left|350 px|''Importing ArcInfo Grid'' d [[Category:SMS Dialogs|A]]

[[Image:WMS Compute GIS Attributes.png|thumb|400 px|''Compute GIS Attributes'' dialog]] ...land uses, rainfall depths, and DPA zones. Typically this information is [[WMS:Importing Shapefiles|imported from standard GIS formatted files]]. This GIS

#Turn on the ''Groundwater'' option in the [[WMS:GSSHA Job Control|''GSSHA Job Control'' dialog]], and set the global parame #Turn on ''Sub-surface losses/gains'' in the [[WMS:GSSHA Feature Arcs#Arcs Spreadsheet|GSSHA feature arcs ''Properties'' dialo

...mory would be required (in addition to whatever other memory being used by WMS). This means that the system would need at least 8 meg of RAM, or some type This same dialog is used for all five types of DEMs supported in the WMS import options: USGS, ARC/INFO®, GRASS, DTED, and SDTS.

[[File:WMS GSSHA Snowmelt Options Dialog.png|thumb|right|400px|The ''GSSHA Snowmelt Op [[Category:GSSHA Dialogs|Snowmelt]]

GMS, SMS, and WMS make use of the '''Import from Web''' feature. ...e '''Get Data From Map''' [[File:WMS GetDataFromMapIcon.svg|16 px]] macro (WMS only).

...loodplain Delineation'' dialog shown in order to delineate a floodplain in WMS. Each of these options are explained and described in detail below. ...n will be dimmed out. However, it is possible to have more than one TIN in WMS. In such cases, specify the TIN on which the floodplain delineation will be

...rographs at outlets are computed. The dialog can be accessed through the [[WMS:Rational Method Edit Parameters|''Rational Method'']] dialog. Options inclu *[[WMS:Rational Method Traditional vs Route by Summing|''Traditional method'']] &n

*'''Output Control...''' – Opens the [[WMS:GSSHA Output Control|''GSSHA Output Control'' dialog]]. *'''Model Linkage...''' – Opens the [[WMS:GSSHA Model Linkage|''GSSHA Model Linkage'' dialog]].

* [[WMS:CE-QUAL-W2|CE-QUAL-W2]] [[Category:CE-QUAL-W2 Dialogs|L]]

...h''' – One or more input hydrographs can be defined for a reservoir. WMS will combine any input hydrographs with other input hydrographs to the rese * [[WMS:TR-20|TR-20 Overview]]

...ddition to defining a polygon using the cursor, a polygon created in the [[WMS:Map Module|Map module]] may be chosen to define a selection polygon. ...example, if a TIN is read in which has coordinate vertices in meters then WMS should be told that the project is working with metric units so that proper

|label5 = WMS [[File:WMS DisplayProjections.png|thumb|350 px|Example of the ''Display Projection'' d

[[File:WMS GSSHA Maps dialog Index Grid tab.png|thumb|300 px|''GSSHA Maps'' dialog sho *''Compute index using WMS coverages''

...accessed by turning on ''Nutrients'' in the other options section of the [[WMS:GSSHA Job Control|''GSSHA Job Control Parameters'' dialog]], then clicking *GSSHA nutrients can only be modeled in [[WMS:Long Term Simulation Dialog|long-term simulations]].

...has been significantly updated, and the process of creating the streams in WMS has been simplified. ...low WMS to correctly generate the GSSHA channel input file. Beginning with WMS 7.0, the stream arcs no longer need to be spatially manipulated. However, t

...unning the '''Sentinel System Driver Installer.exe''' program found in the WMS installation directory. # The License Server is now ready to provide WMS licenses to client machines. Refer to the instructions for registering XMS

...feature object data (the only possibility for the public domain version of WMS). The tree representation can then be used to select basins and outlet poin ...rd in the middle of the new file and save. When opening this new file into WMS, it will contain two trees that can be merged together at the appropriate l

...e commands in the ''File'' menu are used for file input and output for the WMS file types, for printing, and to exit the program. ...tings are not restored, so if wanting to restore all of the settings, exit WMS completely and restart.

If the ''Log Scale'' option is selected, WMS automatically assigns contour intervals as multiples of 10. Furthermore, if [[File:WMS ContourLabels.png|thumb|none|325 px]]

[[Image:WMS Natural Neighbor Options.png|thumb|225 px|''Natural Neighbor Options'' dial Natural neighbor interpolation is also supported in WMS. Natural neighbor interpolation has many positive features. It can be used

...t button.png|16px]] button in the ''Hydraulic structures'' column of the [[WMS:GSSHA Feature Nodes#Properties Dialog|feature nodes ''Properties'' dialog]] [[File:WMS GSSHA Hydraulic Structures dialog.png|right|thumb|350px|''GSSHA Hydraulic S

...Pricing">{{cite web|url=http://www.aquaveo.com/software/wms-pricing|title=WMS Editions & Pricing|publisher=Aquaveo|accessdate=April 26, 2019}}</ref> There are two ''GSSHA'' menus in WMS:

#[[WMS:NSS_Computing_Peak_Discharges#Overlapping_Regions|Select the region equatio ...hat shows overlapping regions in the ''Selected Equations'' section. See [[WMS:NSS_Computing_Peak_Discharges#Overlapping_Regions|NSS Overlapping Regions]]

...the gage weights for each basin must be entered manually from within the [[WMS:Basin HEC-1 Cards#Precipitation...|''Precipitation'']] dialog. ...set of gages has been defined, whenever a transient dataset is imported to WMS to a grid, the dataset is interpolated to each gage and a curve is drawn in

...quations used for travel time are functions of flow path length and slope, WMS automatically determines the length of the arc, and if a TIN or DEM is avai ...ry of equations or as a user-defined equation. The predefined equations in WMS include TR55, FHWA, and Maricopa County. For example, TR55 includes the sta

#Open the *.dem file in WMS [[Category:SMS Raster Dialogs]]

{{WMS Unsupported}} ...ity to run a simple HY-12 model (fewer than 50 nodes) without a license of WMS.

The '''Map Flood''' tool in WMS utilizes ground elevations and existing flood hazard maps from the Federal ...ut. The ground elevation can be downloaded for the specified area from the WMS web services, or a previously existing scatterset containing ground elevati

This dialog allows controlling the shading of faces in the GMS, SMS, or WMS display. By default, all objects are displayed in the color specified by th [[Category:SMS Display Dialogs]]

|title=WMS User Manual (v11.0) == WMS User Manual (v11.0)==

{{Version WMS 11.1}} |title=WMS User Manual (v11.1)

[[Image:WMS Coverage Properties.jpg|thumb|none|left|250 px|WMS Coverage ''Properties'' dialog]] See the [[WMS:Coverages|coverages listing]] to read more about the kinds of attributes th

|title=WMS User Manual (v10.1) == WMS User Manual (v10.1)==

{{Version WMS 11.2}} |title=WMS User Manual (v11.2)

...t Online Maps''' [[File:Add Online Maps Icon.svg|16 px]] macro (in GMS and WMS) or through the ''File'' | '''Add Online Maps''' menu command (in SMS). ...the '''Add Sources From File''' button allows adding new Web Map Service (WMS) sources from an external text file.-->

XMS (WMS, GMS, or SMS) use OpenGL for rendering graphics. OpenGL is a graphics stand XMS (WMS, GMS, or SMS) will have reduced capability when running a remote desktop.

[[File:WMS - Cross section database example.png|thumb|right|Example of a cross section ...Sections'']] or [[#Assign Cross Section Dialog|''Assign Cross Section'']] dialogs.

* [[WMS:HEC-HMS Gages|Gages]] * [[WMS:HEC-HMS Convert Grids|Convert Grids (NEXRAD Radar rainfall grids)]]

...king on a basin, reach, or relief drain when MODRAT is the active model in WMS. ...lly in WMS; for more information on numbering a watershed model, see the [[WMS:MODRAT Numbering the Tree|MODRAT Numbering the Tree]] section.

...s a general purpose watershed modeling system. One of the main purposes of WMS is to provide a consistent interface for a variety of models and grid types ...or transient (one value per item per time step). The following objects in WMS each have a scalar dataset list:

[[Image:WMS IDW Options.jpg|thumb|225 px|''2D IDW Interpolation Options'' dialog]] ...'''Options''' button next to the Inverse distance weighted item in the ''[[WMS:Interpolation Options|2D Interpolation Options]] (3D Interpolation Options)

...T data file'' &ndash; Click [[File:Open Macro.svg|16px]] to bring up the [[WMS:File Menu#Open|''Open'' dialog]] and select the desired HMET definition fil [[Category:GSSHA Dialogs|Long Term]]

...nd link/node (point) based. All of these datasets will be imported into to WMS, if they exist, as part of a GSSHA solution. ...required for a GSSHA simulation. This option can also be selected in the [[WMS:GSSHA#GSSHA Run Options|''GSSHA Run Options'' dialog]].

...n in the same basic way. A brief description of the functionality of these dialogs will simplify the input of parameters to HSPF. ...g that can be set in the module input. Such variables appear in the module dialogs with an edit field and a '''Monthly Values''' button. Either the edit field

...te dialog. The options for feature points and nodes are described in the [[WMS:GSSHA Feature Nodes|GSSHA Feature Nodes]] article. ...bed below. The options for feature points and nodes are described in the [[WMS:GSSHA Feature Nodes|GSSHA Feature Nodes]] article.

GMS, SMS, and WMS can load GIS data such as digital elevation models (DEMs) and images. This *[[WMS:Smoothing_DEMs|Smoothing DEMs]]

...essed by turning on ''Manage files'' in the list of other options on the [[WMS:GSSHA Job Control|''GSSHA Job Control'' dialog]], then clicking '''Edit par ...e a specific index map, other project file, or one of the files saved from WMS. This dialog allows that to be done.

...HA Manual Calibration|manual]] calibration. There is a [[WMS:WMS_Tutorials|WMS tutorial]] that describes how to set up a basic calibration model. ...needed data by turning on ''Calibrate'' in the list on the right in the [[WMS:GSSHA Job Control|''Job Control'' dialog]].

WMS 8.1 and later allows reading and utilizing radar rainfall data from the Nat ...nfall data with HMS, create an HMS model as normal. If desired, use the [[WMS:Hydrologic Modeling Wizard|''Hydrologic Modeling Wizard'']]. After having

...wiki pages. WMS reads this page when a user hits the ''Help'' button in a WMS dialog, and opens the wiki at the page indicated below. * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING

|label5 = WMS * [[Projection Dialogs]]

...wiki pages. WMS reads this page when a user hits the ''Help'' button in a WMS dialog, and opens the wiki at the page indicated below. * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING

...wiki pages. WMS reads this page when a user hits the ''Help'' button in a WMS dialog, and opens the wiki at the page indicated below. * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING

...wiki pages. WMS reads this page when a user hits the ''Help'' button in a WMS dialog, and opens the wiki at the page indicated below. * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING

...wiki pages. WMS reads this page when a user hits the ''Help'' button in a WMS dialog, and opens the wiki at the page indicated below. * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING

* [[Data Calculator|GMS/WMS Data Calculator]] [[Category:SMS Dataset Dialogs]]

{{WMS Deprecated Feature}} [[Category:SMS Import Dialogs|Lidar]]

...wiki pages. WMS reads this page when a user hits the ''Help'' button in a WMS dialog, and opens the wiki at the page indicated below. * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING

...s can be defined but are not mapped/saved to hydraulic models from within WMS) locations. When using a centerline and bank line arcs from a 1D Hydrauli [[Category:SMS Dialogs|Editing]]

...and therefore the DEMs do not lie adjacent to one another as they should. WMS does not contain the utility functions necessary to transform a DEM from on [[Category:DEM Dialogs]]

*'''Define QI''' &ndash; Select to bring up the [[WMS:XY Series Editor|''XY Series Editor'' dialog]]. *'''Define QO''' &ndash; Select to bring up the [[WMS:XY Series Editor|''XY Series Editor'' dialog]].

Dialog is accessed by selecting ''HEC-1'' | '''Edit Parameters...''' in WMS and then choosing '''Basin Data...''' from the ''Edit HEC-1 Parameters'' di ...ows for the definition of the direct input hydrograph. Click to open the [[WMS:XY Series Editor|''XY Series Editor'' dialog]].

*[[WMS:Smoothing_DEMs|Smoothing DEMs]] [[Category:SMS Raster Dialogs]]

...e Water Balance Modeling (MWBM) can be used to update a GSSHA model within WMS by using this dialog. ...; Click '''Browse''' [[File:Open Macro.svg|16px]] to bring up the ''Select WMS Project File'' dialog. Browse to the location of the desired project file.

:The WMS article [[WMS:Map Properties|WMS:Map Properties]] has more information about this dialog.--> [[Category:SMS GIS Dialogs|Menu]]

...all of the spatially distributed parameters for options specified in the [[WMS:GSSHA Job Control|''GSSHA Job Control'' dialog]]. The mapping tables relate *'''Job Control''' &ndash; Brings up the [[WMS:GSSHA Job Control|''GSSHA Job Control'' dialog]].

...MS:HEC-HMS Base Flow|base flow]], [[WMS:HEC-HMS Loss Methods|loss]], and [[WMS:HEC-HMS Transform|transform]] properties must be defined. This is done by f ...s means that when creating an outlet, WMS is actually creating a junction. WMS is also creating a reach when creating an outlet. The only data associated

...osed bridge crossing site and export many of the needed the variables to [[WMS:Hydraulic Toolbox|Hydraulic Toolbox]] for a scour analysis. [[SMS:SRH-2D|SR *[[WMS:Hydraulic Toolbox|Hydraulic Toolbox]]

...osed bridge crossing site and export many of the needed the variables to [[WMS:Hydraulic Toolbox|Hydraulic Toolbox]] for a scour analysis. [[SMS:SRH-2D|SR ...he values needed, some parameters will still need to be specified within [[WMS:Hydraulic Toolbox|Hydraulic Toolbox]].

Using the '''Select Annotation Objects''' [[File:WMS SelectDrawingObjectsTool.svg|16 px]] tool, the image attributes can be chan The '''Select Annotation Object''' [[File:WMS SelectDrawingObjectsTool.svg|16 px]] tool is used to select and set attribu

...re detailed information about each projection and the information in these dialogs can be found in the [[Projections]] article. [[File:WMS DisplayProjections.png|thumb|380 px|Example of the ''Display Projection'' d

...http://www.aquaveo.com/wms-pricing WMS Pricing Page]. The latest update to WMS can be downloaded [http://www.aquaveo.com/downloads?tab=3#TabbedPanels here =WMS 11.2 Release Notes=

*14602 WMS crash when clicking delete button in XY Series Editor dialog. '''Dialogs'''

*14997 WMS Crash with DEM option *14602 WMS Crash when clicking delete button in XY Series Editor dialog

#* New [[SMS:Notes|''Notes'']] tab included in property dialogs. ...S and GENESIS are no longer supported in SMS. Our sister program [[WMS:WMS|WMS]] has an interface for HEC-RAS for those who are interested.