GMS:GMS User Manual: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
| Line 4: | Line 4: | ||
=== The Groundwater Modeling System === | === The Groundwater Modeling System === | ||
;1 Learning GMS | ;1. Learning GMS | ||
:[[GMS:What Is GMS|What is GMS?]] | :[[GMS:What Is GMS|What is GMS?]] | ||
:[[GMS:The GMS Screen|The GMS Screen]] | :[[GMS:The GMS Screen|The GMS Screen]] | ||
| Line 10: | Line 10: | ||
:[[GMS:Tutorials|Tutorials]] | :[[GMS:Tutorials|Tutorials]] | ||
;2 Set Up | ;2. Set Up | ||
:[[System Requirements|System Requirements]] | :[[System Requirements|System Requirements]] | ||
:[[GMS:64 bit|64 bit]] | :[[GMS:64 bit|64 bit]] | ||
| Line 20: | Line 20: | ||
:[[Graphics Card Troubleshooting|Graphics Card Troubleshooting]] | :[[Graphics Card Troubleshooting|Graphics Card Troubleshooting]] | ||
;3 General Tools | ;3. General Tools | ||
:[[GMS:Project Explorer|Project Explorer]] | :[[GMS:Project Explorer|Project Explorer]] | ||
:[[GMS:Units | Units]] | :[[GMS:Units | Units]] | ||
| Line 55: | Line 55: | ||
::[[GMS:Coordinate Transformation|Coordinate Transformation]] | ::[[GMS:Coordinate Transformation|Coordinate Transformation]] | ||
;4 Interpolation | ;4. Interpolation | ||
;4.1 Introduction | ;4.1. Introduction | ||
:[[GMS:Interpolation | Interpolation]] | :[[GMS:Interpolation | Interpolation]] | ||
:[[GMS:Interpolation Commands|Interpolation Commands]] | :[[GMS:Interpolation Commands|Interpolation Commands]] | ||
:[[GMS:3D Interpolation Options|3D Interpolation Options]] | :[[GMS:3D Interpolation Options|3D Interpolation Options]] | ||
:[[GMS:Steady State vs. Transient Interpolation|Steady State vs. Transient Interpolation]] | :[[GMS:Steady State vs. Transient Interpolation|Steady State vs. Transient Interpolation]] | ||
;4.2 Linear | ;4.2. Linear | ||
:[[GMS:Linear | Linear]] | :[[GMS:Linear | Linear]] | ||
;4.3 Inverse Distance Weighted | ;4.3. Inverse Distance Weighted | ||
:[[GMS:Inverse Distance Weighted | Inverse Distance Weighted]] | :[[GMS:Inverse Distance Weighted | Inverse Distance Weighted]] | ||
:[[GMS:Shepards Method | Shepards Method]] | :[[GMS:Shepards Method | Shepards Method]] | ||
| Line 70: | Line 70: | ||
:[[GMS:Subset Definition | Subset Definition]] | :[[GMS:Subset Definition | Subset Definition]] | ||
:[[GMS:Computation of Interpolation Weights|Computation of Interpolation Weights]] | :[[GMS:Computation of Interpolation Weights|Computation of Interpolation Weights]] | ||
;4.4 Clough-Tocher | ;4.4. Clough-Tocher | ||
:[[GMS:Clough-Tocher|Clough-Tocher]] | :[[GMS:Clough-Tocher|Clough-Tocher]] | ||
;4.5 Natural Neighbor | ;4.5. Natural Neighbor | ||
:[[GMS:Natural Neighbor|Natural Neighbor]] | :[[GMS:Natural Neighbor|Natural Neighbor]] | ||
;4.6 Kriging | ;4.6. Kriging | ||
:[[GMS:Kriging|Kriging]] | :[[GMS:Kriging|Kriging]] | ||
:[[GMS:Kriging Options|Kriging Options]] | :[[GMS:Kriging Options|Kriging Options]] | ||
:[[GMS:3D Kriging|3D Kriging]] | :[[GMS:3D Kriging|3D Kriging]] | ||
:[[GMS:Variogram Editor|Variogram Editor]] | :[[GMS:Variogram Editor|Variogram Editor]] | ||
;4.7 Jackknifing | ;4.7. Jackknifing | ||
:[[GMS:Jackknifing|Jackknifing]] | :[[GMS:Jackknifing|Jackknifing]] | ||
;5 Modules | ;5. Modules | ||
;5.1 TIN Module | ;5.1. TIN Module | ||
:[[GMS:TIN Module|TIN Module]] | :[[GMS:TIN Module|TIN Module]] | ||
:[[GMS:Creating a TIN|Creating a TIN]] | :[[GMS:Creating a TIN|Creating a TIN]] | ||
| Line 95: | Line 95: | ||
:[[GMS:TIN Tool Palette|TIN Tool Palette]] | :[[GMS:TIN Tool Palette|TIN Tool Palette]] | ||
;5.2 Boreholes Module | ;5.2. Boreholes Module | ||
:[[GMS:Boreholes|Boreholes Module]] | :[[GMS:Boreholes|Boreholes Module]] | ||
:[[GMS:Creating and Editing Boreholes|Creating and Editing Boreholes]] | :[[GMS:Creating and Editing Boreholes|Creating and Editing Boreholes]] | ||
| Line 112: | Line 112: | ||
:[[GMS:Borehole Tool Palette|Borehole Tool Palette]] | :[[GMS:Borehole Tool Palette|Borehole Tool Palette]] | ||
;5.3 Solid Module | ;5.3. Solid Module | ||
:[[GMS:Solid Module|Solid Module]] | :[[GMS:Solid Module|Solid Module]] | ||
:[[GMS:Solid Properties|Solid Properties]] | :[[GMS:Solid Properties|Solid Properties]] | ||
| Line 125: | Line 125: | ||
:[[GMS:Solid Module Tool Palette|Solid Module Tool Palette]] | :[[GMS:Solid Module Tool Palette|Solid Module Tool Palette]] | ||
;5.4 2D Mesh Module | ;5.4. 2D Mesh Module | ||
:[[GMS:2D Mesh Module|2D Mesh Module]] | :[[GMS:2D Mesh Module|2D Mesh Module]] | ||
:[[GMS:Creating a 2D Mesh|Creating a 2D Mesh]] | :[[GMS:Creating a 2D Mesh|Creating a 2D Mesh]] | ||
| Line 136: | Line 136: | ||
:[[GMS:2D Mesh Tool Palette|2D Mesh Tool Palette]] | :[[GMS:2D Mesh Tool Palette|2D Mesh Tool Palette]] | ||
;5.5 2D Grid Module | ;5.5. 2D Grid Module | ||
:[[GMS:2D Grid Module|2D Grid Module]] | :[[GMS:2D Grid Module|2D Grid Module]] | ||
:[[GMS:2D Grid Types|2D Grid Types]] | :[[GMS:2D Grid Types|2D Grid Types]] | ||
| Line 144: | Line 144: | ||
:[[GMS:2D Grid Tool Palette|2D Grid Tool Palette]] | :[[GMS:2D Grid Tool Palette|2D Grid Tool Palette]] | ||
;5.6 2D Scatter Point Module | ;5.6. 2D Scatter Point Module | ||
:[[GMS:2D Scatter Point Module|2D Scatter Point Module]] | :[[GMS:2D Scatter Point Module|2D Scatter Point Module]] | ||
:[[GMS:Creating and Editing 2D Scatter Point Sets|Creating and Editing 2D Scatter Point Sets]] | :[[GMS:Creating and Editing 2D Scatter Point Sets|Creating and Editing 2D Scatter Point Sets]] | ||
| Line 155: | Line 155: | ||
:[[GMS:2D Scatter Point Tool Palette|2D Scatter Point Tool Palette]] | :[[GMS:2D Scatter Point Tool Palette|2D Scatter Point Tool Palette]] | ||
;5.7 3D Mesh Module | ;5.7. 3D Mesh Module | ||
:[[GMS:3D Mesh Module|3D Mesh Module]] | :[[GMS:3D Mesh Module|3D Mesh Module]] | ||
:[[GMS:3D Element Types|3D Element Types]] | :[[GMS:3D Element Types|3D Element Types]] | ||
| Line 168: | Line 168: | ||
::See "Horizons" and "Solids to Layered Mesh" | ::See "Horizons" and "Solids to Layered Mesh" | ||
;5.8 3D Grid Module | ;5.8. 3D Grid Module | ||
:[[GMS:3D Grid Module|3D Grid Module]] | :[[GMS:3D Grid Module|3D Grid Module]] | ||
:[[GMS:3D Grid Types|3D Grid Types]] | :[[GMS:3D Grid Types|3D Grid Types]] | ||
| Line 184: | Line 184: | ||
::See "Iso Surfaces" | ::See "Iso Surfaces" | ||
;5.9 3D Scatter Point Module | ;5.9. 3D Scatter Point Module | ||
:[[GMS:3D Scatter Point Module|3D Scatter Point Module]] | :[[GMS:3D Scatter Point Module|3D Scatter Point Module]] | ||
:[[GMS:Interpolating with 3D Scatter Points|Interpolating with 3D Scatter Points]] | :[[GMS:Interpolating with 3D Scatter Points|Interpolating with 3D Scatter Points]] | ||
| Line 193: | Line 193: | ||
::Connection to "Active/Inactive Points", "Inverse Distance Weighted" | ::Connection to "Active/Inactive Points", "Inverse Distance Weighted" | ||
;5.10 Map Module | ;5.10. Map Module | ||
:[[GMS:Map Module|Map Module]] | :[[GMS:Map Module|Map Module]] | ||
:[[GMS:Feature Objects|Feature Objects]] | :[[GMS:Feature Objects|Feature Objects]] | ||
| Line 204: | Line 204: | ||
:[[GMS:Feature Object Tool Palette|Feature Object Tool Palette]] | :[[GMS:Feature Object Tool Palette|Feature Object Tool Palette]] | ||
;5.11 GIS Module | ;5.11. GIS Module | ||
:[[GMS:GIS Module|GIS Module]] | :[[GMS:GIS Module|GIS Module]] | ||
:[[GMS:Enabling ArcObjects|Enabling ArcObjects]] | :[[GMS:Enabling ArcObjects|Enabling ArcObjects]] | ||
| Line 215: | Line 215: | ||
:[[GMS:GIS Tool Palette|GIS Tool Palette]] | :[[GMS:GIS Tool Palette|GIS Tool Palette]] | ||
;6 Models | ;6. Models | ||
;6.1 FEMWATER | ;6.1. FEMWATER | ||
:[[GMS:FEMWATER|FEMWATER]] | :[[GMS:FEMWATER|FEMWATER]] | ||
;6.1.1 FEMWATER Pre-Processing | ;6.1.1. FEMWATER Pre-Processing | ||
:[[GMS:Building a FEMWATER Model|Building a FEMWATER Model]] | :[[GMS:Building a FEMWATER Model|Building a FEMWATER Model]] | ||
::[[GMS:FEMWATER Direct Approach|FEMWATER Direct Approach]] | ::[[GMS:FEMWATER Direct Approach|FEMWATER Direct Approach]] | ||
| Line 229: | Line 229: | ||
:[[GMS:FEMWATER Initial Conditions|FEMWATER Initial Conditions]] | :[[GMS:FEMWATER Initial Conditions|FEMWATER Initial Conditions]] | ||
:[[GMS:Saving a FEMWATER Simulation|Saving a FEMWATER Simulation]] | :[[GMS:Saving a FEMWATER Simulation|Saving a FEMWATER Simulation]] | ||
;6.1.2 FEMWATER Post-Processing | ;6.1.2. FEMWATER Post-Processing | ||
:[[GMS:FEMWATER Display Options|FEMWATER Display Options]] | :[[GMS:FEMWATER Display Options|FEMWATER Display Options]] | ||
:[[GMS:FEMWATER Post Processing Viewing Options|FEMWATER Post Processing Viewing Options]] | :[[GMS:FEMWATER Post Processing Viewing Options|FEMWATER Post Processing Viewing Options]] | ||
:[[GMS:FEMWATER Particle Sets|FEMWATER Particle Sets]] | :[[GMS:FEMWATER Particle Sets|FEMWATER Particle Sets]] | ||
;6.2 MODAEM | ;6.2. MODAEM | ||
:[[GMS:MODAEM|MODAEM]] | :[[GMS:MODAEM|MODAEM]] | ||
:[[GMS:MODAEM License Agreement|MODAEM License Agreement]] | :[[GMS:MODAEM License Agreement|MODAEM License Agreement]] | ||
:[[GMS:MODAEM Display Options|MODAEM Display Options]] | :[[GMS:MODAEM Display Options|MODAEM Display Options]] | ||
;6.3 MODFLOW | ;6.3. MODFLOW | ||
:[[GMS:MODFLOW|MODFLOW]] | :[[GMS:MODFLOW|MODFLOW]] | ||
:[[GMS:MODFLOW 2005|MODFLOW 2005]] | :[[GMS:MODFLOW 2005|MODFLOW 2005]] | ||
;6.3.1 MODFLOW Packages | ;6.3.1. MODFLOW Packages | ||
:[[GMS:MODFLOW Packages Supported in GMS|MODFLOW Packages Supported in GMS]] | :[[GMS:MODFLOW Packages Supported in GMS|MODFLOW Packages Supported in GMS]] | ||
:[[GMS:LPF Package Dialog|LPF Package Dialog]] | :[[GMS:LPF Package Dialog|LPF Package Dialog]] | ||
| Line 270: | Line 270: | ||
:[[GMS:STR/SFR Packages|STR/SFR Packages]] | :[[GMS:STR/SFR Packages|STR/SFR Packages]] | ||
:[[GMS:UZF Package|UZF Package]] | :[[GMS:UZF Package|UZF Package]] | ||
;6.3.2 MODFLOW Pre-Processing | ;6.3.2. MODFLOW Pre-Processing | ||
:[[GMS:Building a MODFLOW Model|Building a MODFLOW Model]] | :[[GMS:Building a MODFLOW Model|Building a MODFLOW Model]] | ||
:[[GMS:MODFLOW Array Editor|MODFLOW Array Editor]] | :[[GMS:MODFLOW Array Editor|MODFLOW Array Editor]] | ||
| Line 293: | Line 293: | ||
::[[GMS:Source/Sink Attributes|Source/Sink Attributes]] | ::[[GMS:Source/Sink Attributes|Source/Sink Attributes]] | ||
::see "Calibration", "Parameters", "Stochastic Modeling" | ::see "Calibration", "Parameters", "Stochastic Modeling" | ||
;6.3.3 MODFLOW Post-Processing | ;6.3.3. MODFLOW Post-Processing | ||
:[[GMS:MODFLOW Display Options|MODFLOW Display Options]] | :[[GMS:MODFLOW Display Options|MODFLOW Display Options]] | ||
:[[GMS:MODFLOW Post Processing Viewing Options|MODFLOW Post Processing Viewing Options]] | :[[GMS:MODFLOW Post Processing Viewing Options|MODFLOW Post Processing Viewing Options]] | ||
| Line 303: | Line 303: | ||
:[[GMS:Viewing Computed Fluxes|Viewing Computed Fluxes]] | :[[GMS:Viewing Computed Fluxes|Viewing Computed Fluxes]] | ||
;6.4 MODPATH | ;6.4. MODPATH | ||
:[[GMS:MODPATH|MODPATH]] | :[[GMS:MODPATH|MODPATH]] | ||
:[[GMS:MODPATH Particle Tracking|MODPATH Particle Tracking]] | :[[GMS:MODPATH Particle Tracking|MODPATH Particle Tracking]] | ||
| Line 310: | Line 310: | ||
:[[GMS:MODPATH Display Options|MODPATH Display Options]] | :[[GMS:MODPATH Display Options|MODPATH Display Options]] | ||
;6.5 MT3DMS | ;6.5. MT3DMS | ||
:[[GMS:MT3DMS|MT3DMS]] | :[[GMS:MT3DMS|MT3DMS]] | ||
:[[GMS:MT3D Packages|MT3D Packages]] | :[[GMS:MT3D Packages|MT3D Packages]] | ||
| Line 323: | Line 323: | ||
:[[GMS:MT3DMS Display Options|MT3DMS Display Options]] | :[[GMS:MT3DMS Display Options|MT3DMS Display Options]] | ||
;6.6 PEST | ;6.6. PEST | ||
:[[GMS:PEST|PEST]] | :[[GMS:PEST|PEST]] | ||
::see "Calibration", "Parameters", "Stochastic Modeling" | ::see "Calibration", "Parameters", "Stochastic Modeling" | ||
;6.7 RT3D | ;6.7. RT3D | ||
:[[GMS:RT3D|RT3D]] | :[[GMS:RT3D|RT3D]] | ||
:[[GMS:Basic Transport Package Dialog|Basic Transport Package Dialog]] | :[[GMS:Basic Transport Package Dialog|Basic Transport Package Dialog]] | ||
::see MT3DMS for interface inquiries | ::see MT3DMS for interface inquiries | ||
;6.8 SEAM3D | ;6.8. SEAM3D | ||
:[[GMS:SEAM3D|SEAM3D]] | :[[GMS:SEAM3D|SEAM3D]] | ||
::see MT3DMS and RT3D | ::see MT3DMS and RT3D | ||
;6.9 SEAWAT | ;6.9. SEAWAT | ||
:[[GMS:SEAWAT|SEAWAT]] | :[[GMS:SEAWAT|SEAWAT]] | ||
:[[GMS:Building a SEAWAT Model|Building a SEAWAT Model]] | :[[GMS:Building a SEAWAT Model|Building a SEAWAT Model]] | ||
| Line 345: | Line 345: | ||
::see MODFLOW with HDF5 | ::see MODFLOW with HDF5 | ||
;6.10 SEEP2D | ;6.10. SEEP2D | ||
:[[GMS:SEEP2D|SEEP2D]] | :[[GMS:SEEP2D|SEEP2D]] | ||
:[[GMS:SEEP2D Display Options|SEEP2D Display Options]] | :[[GMS:SEEP2D Display Options|SEEP2D Display Options]] | ||
:[[GMS:SEEP2D Solution|SEEP2D Solution]] | :[[GMS:SEEP2D Solution|SEEP2D Solution]] | ||
;6.11 T-PROGS | ;6.11. T-PROGS | ||
:[[GMS:T-PROGS|T-PROGS]] | :[[GMS:T-PROGS|T-PROGS]] | ||
:[[GMS:Vertical Markov Chain|Vertical Markov Chain]] | :[[GMS:Vertical Markov Chain|Vertical Markov Chain]] | ||
| Line 356: | Line 356: | ||
:[[GMS:TSIM|TSIM]] | :[[GMS:TSIM|TSIM]] | ||
;6.12 UTEXAS | ;6.12. UTEXAS | ||
:[[GMS:UTEXAS|UTEXAS]] | :[[GMS:UTEXAS|UTEXAS]] | ||
:[[GMS:UTEXAS Display Options|UTEXAS Display Options]] | :[[GMS:UTEXAS Display Options|UTEXAS Display Options]] | ||
;6.13 WASH123D | ;6.13. WASH123D | ||
:[[GMS:WASH123D Display Options|WASH123D Display Options]] | :[[GMS:WASH123D Display Options|WASH123D Display Options]] | ||
;7 Modeling | ;7. Modeling | ||
;7.1 Calibration | ;7.1. Calibration | ||
:[[GMS:Model Calibration|Model Calibration]] | :[[GMS:Model Calibration|Model Calibration]] | ||
:[[GMS:Automated Parameter Estimation|Automated Parameter Estimation]] | :[[GMS:Automated Parameter Estimation|Automated Parameter Estimation]] | ||
| Line 375: | Line 375: | ||
:[[GMS:Model Checker|Model Checker]] | :[[GMS:Model Checker|Model Checker]] | ||
;7.2 Parameters | ;7.2. Parameters | ||
:[[GMS:Parameters|Parameters]] | :[[GMS:Parameters|Parameters]] | ||
:[[GMS:Parameter Dialog|Parameter Dialog]] | :[[GMS:Parameter Dialog|Parameter Dialog]] | ||
| Line 382: | Line 382: | ||
:[[GMS:Standard MODFLOW Parameters|Standard MODFLOW Parameters]] | :[[GMS:Standard MODFLOW Parameters|Standard MODFLOW Parameters]] | ||
;7.3 Stochastic Modeling | ;7.3. Stochastic Modeling | ||
:[[GMS:Stochastic Modeling|Stochastic Modeling]] | :[[GMS:Stochastic Modeling|Stochastic Modeling]] | ||
:[[GMS:Gaussian Field Generator|Gaussian Field Generator]] | :[[GMS:Gaussian Field Generator|Gaussian Field Generator]] | ||
:[[GMS:Risk Analysis Wizard|Risk Analysis Wizard]] | :[[GMS:Risk Analysis Wizard|Risk Analysis Wizard]] | ||
;8 Importing/Exporting Data | ;8. Importing/Exporting Data | ||
:[[GMS:Text Import Wizard Supported File Formats|Text Import Wizard Supported File Formats]] | :[[GMS:Text Import Wizard Supported File Formats|Text Import Wizard Supported File Formats]] | ||
:[[GMS:Text Import Wizard|Text Import Wizard]] | :[[GMS:Text Import Wizard|Text Import Wizard]] | ||
| Line 405: | Line 405: | ||
:[[GMS:GeoStudio Import|GeoStudio Import]] | :[[GMS:GeoStudio Import|GeoStudio Import]] | ||
;9 Appendix | ;9. Appendix | ||
:[[GMS:File Formats|File Formats]] | :[[GMS:File Formats|File Formats]] | ||
:[[GMS:Version History|Version History]] | :[[GMS:Version History|Version History]] | ||
:[[GMS:Feature Requests|Feature Requests]] | :[[GMS:Feature Requests|Feature Requests]] | ||
:[[GMS:Bugfixes GMS|Bugfixes GMS]] | :[[GMS:Bugfixes GMS|Bugfixes GMS]] | ||
Revision as of 20:26, 2 June 2011
|
This is an Aquaveo Public Wiki Book | [ bookshelf ] |
| [ Open in Book Creator ] |
GMS User Manual (v8.1)
The Groundwater Modeling System
- 1. Learning GMS
- What is GMS?
- The GMS Screen
- Tutorials
- 2. Set Up
- System Requirements
- 64 bit
- License Agreement
- Registering GMS
- USB Network Lock
- Community Edition
- Graphics Card Troubleshooting
- 3. General Tools
- Project Explorer
- Units
- CAD Options
- Animations
- Annotations
- Preferences
- Contour Options
- Data Set Files
- Materials
- Data Sets
- Material Set
- The Edit Menu
- The File Menu
- The Display Menu
- Map to Models
- Map to Modules
- Cross Sections
- Projections
- Coordinate Systems
- 4. Interpolation
- 4.1. Introduction
- Interpolation
- Interpolation Commands
- 3D Interpolation Options
- Steady State vs. Transient Interpolation
- 4.2. Linear
- Linear
- 4.3. Inverse Distance Weighted
- Inverse Distance Weighted
- Shepards Method
- Gradient Plane Nodal Functions
- Quadratic Nodal Functions
- Subset Definition
- Computation of Interpolation Weights
- 4.4. Clough-Tocher
- Clough-Tocher
- 4.5. Natural Neighbor
- Natural Neighbor
- 4.6. Kriging
- Kriging
- Kriging Options
- 3D Kriging
- Variogram Editor
- 4.7. Jackknifing
- Jackknifing
- 5. Modules
- 5.1. TIN Module
- TIN Module
- Creating a TIN
- Editing a TIN
- Converting TINS to Other Data Types
- Building Solids and 3D Meshes with TINs
- Triangulation
- TIN Files
- TIN Settings
- TIN Display Options
- TIN Tool Palette
- 5.2. Boreholes Module
- Boreholes Module
- Creating and Editing Boreholes
- Borehole Display Options
- Borehole Hydrogeologic Units
- Converting Borehole Data
- Borehole Cross Sections
- Horizons
- Borehole Tool Palette
- 5.3. Solid Module
- Solid Module
- Solid Properties
- Solid Primitives
- Solids to Layered Mesh
- Solids to HUF
- Solids to MODFLOW Command
- Solid Display Options
- Solid Module Tool Palette
- 5.4. 2D Mesh Module
- 2D Mesh Module
- Creating a 2D Mesh
- Editing 2D Meshes
- 2D Mesh Settings
- Converting a 2D Mesh to other types of Data
- Element types
- 2D Mesh Display Options
- 2D Mesh Polygon Attributes
- 2D Mesh Tool Palette
- 5.5. 2D Grid Module
- 2D Grid Module
- 2D Grid Types
- Creating and Editing 2D Grids
- Converting 2D Grids
- 2D Grid Display Options
- 2D Grid Tool Palette
- 5.6. 2D Scatter Point Module
- 2D Scatter Point Module
- Creating and Editing 2D Scatter Point Sets
- Interpolating with 2D Scatter Points
- Converting 2D Scatter Points to Other Types of Data
- Gaussian Field Generator
- Active/Inactive Points
- 2D Interpolation Options
- 2D Scatter Point Display Options
- 2D Scatter Point Tool Palette
- 5.7. 3D Mesh Module
- 3D Mesh Module
- 3D Element Types
- Creating a 3D Mesh
- Editing a 3D Mesh
- Classify Material Zones
- Iso Surfaces
- Converting 3D Meshes to Other Data Types
- Building the 3D Mesh from the FEMWATER Conceptual Model
- 3D Mesh Display Options
- 3D Mesh Tool Palette
- See "Horizons" and "Solids to Layered Mesh"
- 5.8. 3D Grid Module
- 3D Grid Module
- 3D Grid Types
- Creating and Editing 3D Grids
- Classify Material Zones
- 3D Grid Viewing Modes
- Converting 3D Grids to Other Data Types
- Cell Properties
- Active/Inactive Cells
- Named Layer Ranges
- Redistribute Grid Cells
- Redistribute Layers
- 3D Grid Display Options
- 3D Grid Tool Palette
- See "Iso Surfaces"
- 5.9. 3D Scatter Point Module
- 3D Scatter Point Module
- Interpolating with 3D Scatter Points
- Converting 3D Scatter Points to Other Data Types
- Bounding Grid
- 3D Scatter Point Display Options
- 3D Scatter Point Tool Palette
- Connection to "Active/Inactive Points", "Inverse Distance Weighted"
- 5.10. Map Module
- Map Module
- Feature Objects
- Conceptual Model
- Coverages
- Grid Frame
- Clean Command
- Temporal Discretization
- Feature Object Display Options
- Feature Object Tool Palette
- 5.11. GIS Module
- GIS Module
- Enabling ArcObjects
- GIS to Feature Objects
- Add Data
- Arc Hydro Groundwater
- GIS Display Options
- GIS Tool Palette
- 6. Models
- 6.1. FEMWATER
- FEMWATER
- 6.1.1. FEMWATER Pre-Processing
- Building a FEMWATER Model
- FEMWATER Flows
- Point Source/Sink BC
- Assign Node/Face BC
- FEMWATER Point / Arc Properties
- FEMWATER Model Input
- FEMWATER Initial Conditions
- Saving a FEMWATER Simulation
- 6.1.2. FEMWATER Post-Processing
- FEMWATER Display Options
- FEMWATER Post Processing Viewing Options
- FEMWATER Particle Sets
- 6.2. MODAEM
- MODAEM
- MODAEM License Agreement
- MODAEM Display Options
- 6.3. MODFLOW
- MODFLOW
- MODFLOW 2005
- 6.3.1. MODFLOW Packages
- MODFLOW Packages Supported in GMS
- LPF Package Dialog
- BCF Package Dialog
- Horizontal Flow Barriers
- Recharge Package
- Evapotranspiration Package
- River Package
- Well Package
- Drain Package
- General Head Package
- Time Variant Specified Head Package
- SIP Package Dialog
- PCG2 Package Dialog
- IBOUND
- ICBUND Array
- SSOR Package Dialog
- Lake Package
- Evapotranspiration Segments Package
- DRT Package
- Global Options/Basic Package
- HUF Package
- LMG1 Package Dialog
- MODFLOW MNW Package
- STR/SFR Packages
- UZF Package
- 6.3.2. MODFLOW Pre-Processing
- Building a MODFLOW Model
- MODFLOW Array Editor
- MODFLOW Grid Approach
- MODFLOW Conceptual Model Approach
- Map to MODFLOW
- Defining the Layer Elevations
- Standard MODFLOW Parameters
- Saving and Reading a MODFLOW Simulation
- Output Control
- Importing MODFLOW Files
- MODFLOW with HDF5
- Unsupported MODFLOW Features
- Interpolate to MODFLOW Layers
- MODFLOW Layers to 2D scatter points
- MODFLOW Source/Sink Dialog
- Source/Sink Attributes
- see "Calibration", "Parameters", "Stochastic Modeling"
- 6.3.3. MODFLOW Post-Processing
- MODFLOW Display Options
- MODFLOW Post Processing Viewing Options
- MODFLOW Solution Properties Dialog
- Saving and Reading a MODFLOW Simulation
- Cell Properties
- MODFLOW World File
- Error Summary Plot
- Viewing Computed Fluxes
- 6.4. MODPATH
- MODPATH
- MODPATH Particle Tracking
- MODPATH Particle Sets
- MODPATH Zone Codes
- MODPATH Display Options
- 6.5. MT3DMS
- MT3DMS
- MT3D Packages
- Basic Transport Package Dialog
- MT3D Source/Sink Mixing Package
- MT3D point Sources/Sinks BC
- Cell by Cell Editing of Sources/Sinks
- Building an MT3DMS Simulation
- Saving an MT3DMS Simulation
- Importing an MT3D Simulation
- MT3DMS Display Options
- 6.6. PEST
- PEST
- see "Calibration", "Parameters", "Stochastic Modeling"
- 6.7. RT3D
- RT3D
- Basic Transport Package Dialog
- see MT3DMS for interface inquiries
- 6.8. SEAM3D
- SEAM3D
- see MT3DMS and RT3D
- 6.9. SEAWAT
- SEAWAT
- Building a SEAWAT Model
- SEAWAT Global Options Dialog
- SEAWAT MODFLOW AUX Variables
- SEAWAT Packages
- Importing a SEAWAT Simulation
- see MODFLOW with HDF5
- 6.10. SEEP2D
- SEEP2D
- SEEP2D Display Options
- SEEP2D Solution
- 6.11. T-PROGS
- T-PROGS
- Vertical Markov Chain
- Strike Dip Markov Chain
- TSIM
- 6.12. UTEXAS
- UTEXAS
- UTEXAS Display Options
- 6.13. WASH123D
- WASH123D Display Options
- 7. Modeling
- 7.1. Calibration
- Model Calibration
- Automated Parameter Estimation
- Parameter Estimation Dialog
- PEST
- Run Options
- Observations
- Plot Wizard
- Calibration Targets
- Model Checker
- 7.2. Parameters
- Parameters
- Parameter Dialog
- Pilot Points
- Multiplier Arrays for Parameters
- Standard MODFLOW Parameters
- 7.3. Stochastic Modeling
- Stochastic Modeling
- Gaussian Field Generator
- Risk Analysis Wizard
- 8. Importing/Exporting Data
- Text Import Wizard Supported File Formats
- Text Import Wizard
- Import from Web
- Importing/Exporting CAD Data
- Import From Database
- Importing Non-native GMS Files
- Exporting Non-native GMS Files
- Data Set Files
- Importing/Exporting GIS Grids
- Importing/Exporting Shapefiles
- Images
- Importing USGS DEMs
- Registering an Image
- Shapefiles
- KMZ files
- GeoStudio Import
- 9. Appendix
- File Formats
- Version History
- Feature Requests
- Bugfixes GMS
