GMS:GMS User Manual
From XMS Wiki
Jump to navigationJump to search
|
This is an Aquaveo Public Wiki Book | [ bookshelf ] |
| [ Open in Book Creator ] |
GMS User Manual (v8.1)
Geo-technical Engineering
- 1 Learning GMS
- What is GMS?
- Tutorials
- 2 Set Up
- System Requirements
- 64 bit
- Registering GMS
- License Agreement
- Graphics Card Troubleshooting
- USB Network Lock
- Register
- Community Edition
- 3 Modules
- 3.1 TIN Module
- TIN Module
- Creating a TIN
- Editing a TIN
- Converting TINS to Other Data Types
- Building Solids and 3D Meshes with TINs
- Horizons
- Triangulation
- TIN Files
- TIN Settings
- TIN Display Options
- TIN Tool Palette
- 3.2 Boreholes Module
- Boreholes Module
- Creating and Editing Boreholes
- Borehole Display Options
- Borehole Hydrogeologic Units
- Converting Borehole Data
- Borehole Cross Sections
- Borehole Tool Palette
- 3.3 Solid Module
- Solid Module
- Solid Properties
- Solid Primitives
- Cross Sections
- Horisons to Solids
- Solids to HUF
- Solids to Layered Mesh
- Solids to MODFLOW Command
- Solid Display Options
- Solid Module Tool Palette
- 3.4 2D Mesh Module
- 2D Mesh Module
- Creating a 2D Mesh
- Editing 2D Meshes
- 2D Mesh Settings
- Converting a 2D Mesh to other types of Data
- Element types
- 2D Mesh Display Options
- 2D Mesh Polygon Attributes
- 2D Mesh Tool Palette
- 3.5 2D Grid Module
- 2D Grid Module
- 2D Grid Types
- Creating and Editing 2D Grids
- Converting 2D Grids
- 2D Grid Display Options
- 2D Grid Tool Palette
- 3.6 2D Scatter Point Module
- 2D Scatter Point Module
- Creating and Editing 2D Scatter Point Sets
- Interpolating with 2D Scatter Points
- Converting 2D Scatter Points to Other Types of Data
- Gaussian Field Generator
- Active/Inactive Points
- 2D Interpolation Options
- 2D Scatter Point Display Options
- 2D Scatter Point Tool Palette
- 3.7 3D Mesh Module
- 3D Mesh Module
- 3D Element Types
- Creating a 3D Mesh
- Editing a 3D Mesh
- Iso Surfaces
- Converting 3D Meshes to Other Data Types
- Building the 3D Mesh from the FEMWATER Conceptual Model
- 3D Mesh Display Options
- 3D Mesh Tool Palette
- See "Horizons" and "Solids to Layered Mesh"
- 3.8 3D Grid Module
- 3D Grid Module
- 3D Grid Types
- Creating and Editing 3D Grids
- 3D Grid Viewing Modes
- Converting 3D Grids to Other Data Types
- Cell Properties
- Active/Inactive Cells
- Named Layer Ranges
- Redistribute Grid Cells
- Redistribute Layers
- 3D Grid Display Options
- 3D Grid Tool Palette
- See "Iso Surfaces"
- 3.9 3D Scatter Point Module
- 3D Scatter Point Module
- Interpolating with 3D Scatter Points
- Converting 3D Scatter Points to Other Data Types
- Bounding Grid
- 3D Scatter Point Display Options
- 3D Scatter Point Tool Palette
- Connection to "Active/Inactive Points", "Inverse Distance Weighted"
- 3.10 Map Module
- Map Module
- Feature Objects
- Conceptual Model
- Coverages
- Grid Frame
- Clean Command
- Feature Object Display Options
- Feature Object Tool Palette
- 3.11 GIS Module
- GIS Module
- Enabling ArcObjects
- GIS to Feature Objects
- Add Data
- Arc Hydro Groundwater
- GIS Display Options
- GIS Tool Palette
- 4 General Tools
- Project Explorer
- Units
- CAD Options
- Animations
- Annotations
- Projections
- Preferences
- Contour Options
- Data Set Files
- Materials
- Classify Material Zones
- Data Sets
- The GMS Screen
- The Edit Menu
- The File Menu
- The Display Menu
- Map to MODFLOW
- Map to Models
- Map to Modules
- Temporal Discretization
- Coordinate Systems
- 5 Interpolation
- Interpolation
- Interpolation Commands
- Steady State vs. Transient Interpolation
- Linear
- Inverse Distance Weighted
- Clough-Tocher
- Natural Neighbor
- Jackknifing
- Kriging
- 3D Interpolation Options
- 6 Models
- Model Checker
- 6.1 ART3D
- ART3D
- 6.2 FEMWATER
- FEMWATER
- 6.2.1 FEMWATER Pre-Processing
- Building a FEMWATER Model
- FEMWATER Flows
- Horizons to 3D Mesh
- Point Source/Sink BC
- Assign Node/Face BC
- FEMWATER Point / Arc Properties
- FEMWATER Model Input
- FEMWATER Initial Conditions
- Saving a FEMWATER Simulation
- 6.2.2 FEMWATER Post-Processing
- FEMWATER Display Options
- FEMWATER Post Processing Viewing Options
- FEMWATER Particle Sets
- 6.3 MODAEM
- MODAEM
- MODAEM License Agreement
- MODAEM Display Options
- 6.4 MODFLOW
- MODFLOW
- MODFLOW 2005
- 6.4.1 MODFLOW Packages
- MODFLOW Packages Supported in GMS
- LPF Package Dialog
- BCF Package Dialog
- Horizontal Flow Barriers
- Recharge Package
- Evapotranspiration Package
- River Package
- Well Package
- Drain Package
- General Head Package
- Time Variant Specified Head Package
- SIP Package Dialog
- PCG2 Package Dialog
- IBOUND
- ICBUND Array
- SSOR Package Dialog
- Lake Package
- Evapotranspiration Segments Package
- DRT Package
- Global Options/Basic Package
- HUF Package
- LMG1 Package Dialog
- MODFLOW MNW Package
- STR/SFR Packages
- UZF Package
- 6.4.2 MODFLOW Pre-Processing
- Building a MODFLOW Model
- MODFLOW Array Editor
- MODFLOW Properties Dialog Box
- MODFLOW Grid Approach
- MODFLOW Conceptual Model Approach
- Defining the Layer Elevations
- Standard MODFLOW Parameters
- Saving and Reading a MODFLOW Simulation
- Output Control
- Importing MODFLOW Files
- MODFLOW with HDF5
- Unsupported MODFLOW Features
- Interpolate to MODFLOW Layers
- MODFLOW Layers to 2D scatter points
- MODFLOW Source/Sink Dialog
- Source/Sink Attributes
- see "Calibration", "Parameters", "Stochastic Modeling"
- 6.4.3 MODFLOW Post-Processing
- MODFLOW Display Options
- MODFLOW Post Processing Viewing Options
- MODFLOW Solution Properties Dialog
- Saving and Reading a MODFLOW Simulation
- Cell Properties
- MODFLOW World File
- Error Summary Plot
- Viewing Computed Fluxes
- 6.5 MODPATH
- MODPATH
- MODPATH Particle Tracking
- MODPATH Particle Sets
- MODPATH Zone Codes
- MODPATH Display Options
- 6.6 MT3DMS
- MT3DMS
- MT3D Packages
- Basic Transport Package Dialog
- MT3D Source/Sink Mixing Package
- MT3D point Sources/Sinks BC
- Cell by Cell Editing of Sources/Sinks
- Building an MT3DMS Simulation
- Saving an MT3DMS Simulation
- Importing an MT3D Simulation
- MT3DMS Display Options
- 6.7 PEST
- PEST
- see "Calibration", "Parameters", "Stochastic Modeling"
- 6.8 RT3D
- RT3D
- Basic Transport Package Dialog
- see MT3DMS for interface inquiries
- 6.9 SEAM3D
- SEAM3D
- see MT3DMS and RT3D
- 6.10 SEAWAT
- SEAWAT
- Building a SEAWAT Model
- SEAWAT Global Options Dialog
- SEAWAT MODFLOW AUX Variables
- SEAWAT Packages
- Importing a SEAWAT Simulation
- see MODFLOW with HDF5
- 6.11 SEEP2D
- SEEP2D
- SEEP2D Display Options
- SEEP2D Solution
- 6.12 T-PROGS
- T-PROGS
- Material Set
- Vertical Markov Chain
- Strike Dip Markov Chain
- TSIM
- 6.13 UTEXAS
- UTEXAS
- UTEXAS Display Options
- 7 Modeling
- 7.1 Calibration
- Model Calibration
- Automated Parameter Estimation
- Parameter Estimation Dialog
- PEST
- Run Options
- Observations
- Plot Wizard
- Calibration Targets
- 7.2 Parameters
- Parameters
- Parameter Dialog
- Pilot Points
- Multiplier Arrays for Parameters
- Standard MODFLOW Parameters
- 7.3 Stochastic Modeling
- Stochastic Modeling
- Gaussian Field Generator
- Risk Analysis Wizard
- 8 Importing/Exporting Data
- Text Import Wizard Supported File Formats
- Text Import Wizard
- Import from Web
- Importing/Exporting CAD Data
- Import From Database
- Importing Non-native GMS Files
- Exporting Non-native GMS Files
- Data Set Files
- Importing/Exporting GIS Grids
- Importing/Exporting Shapefiles
- Images
- Importing USGS DEMs
- Registering an Image
- Shapefiles
- KMZ files
- GeoStudio Import
- 9 APPENDIX
- File Formats
- Version History
- Feature Requests
- Bugfixes GMS
